How do I reset my vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I change settings on SMOK alien 220w?
Once you've installed the tank on the device, simply adjust the wattage or temperature to suit. Pressing the power button and down together momentarily will access the mode selection, allowing you to choose between wattage, temperature and memory mode.
Is there a way to reset a SMOK vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do I reset my SMOK vape password?
Enter the email associated with your SMOK account and we will send a link to the reset page.
How do I turn down the watts on my Smok?
To change the device's wattage, press the fire button three times quickly. You can then press or hold the fire button to adjust the current power level. When you reach the desired power level, don't touch the fire button for a few seconds.
How do I unlock my vape mod?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo again to unlock it power button up button same time for two seconds unlocked.MoreSo again to unlock it power button up button same time for two seconds unlocked.
How do I fix my SMOK vape?
If your SMOK vape isn't turning on, it could be a quick fix:Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use.Check the battery to confirm that it's properly inserted.
Why is my SMOK vape not working?
SMOK Wave Not Hitting If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
How do I fix low resistance vape?
Low Resistance Dry burning is one way to get around this problem because it can raise the coil's resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires. If using a factory coil, either a new coil or vape is needed.
How do you unlock a SMOK?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you unlock the SMOK vape power?
Using the Smok M80 is very simple. It features a 5 click lock system to prevent accidental misfires while your device is stored. To lock or unlock the device press the main fire button 5 times in quick succession. You can power your device off to conserve battery life by entering the menu system.
How do I reset my SMOK morph 2 vape?
Smok Morph 2 Mod – Screen Display and FunctionalityPress the fire button 5 times to power the device on/off.Hold the fire button to vape (the device will cease to fire after 8 seconds)Holding the fire and right menu button will change the colour scheme.Press the fire and left menu button to reset the puff counter.More items...•
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
How to reset a sprite tank?
3) Continuously pressing mode button 3 times to unlock the mode button. 4) When install a tank, it will automatic identify its coil material and resistance, press up (+) button for reset, ...
What is the ECO mode on a tank?
When your battery is lower than 40%, it will automatic provide an option to go to ECO (Power ECO) mode. When your install the tank with temperature heating wire (SS, Ti, Ni), it will automatic provide an option to go to STC (Smart TC) mode.
Can you leave a charging device unattended?
Do not leave the charging device unattended. Do not drop, throw or abuse your device, it may cause damage. Please use a standard USB output charger in proper charging Current and Voltage range. Keep away from water or any flammable gas, liquid. Do not exposure to direct sunlight, dust, moisture or mechanical shock.
How to increase wattage on a vape?
-To generally adjust the output wattage to enrich your vaping flavor, first unlock the touch buttons. Press the "DOWN" button to increase the wattage.
Who makes the Revenge X?
The family of Revenger models is an iconic series designed and manufactured by Vaporesso for the safer, purer and richer vaping experience.