Press the left regulatory button to set the duration and then press the fire button to confirm. Once the duration is set (like 5 seconds), when you hold the fire button and vape over the pre-set time, it’ll display “OVER 5S PROTECT” and shut down automatically. Press the fire button 5 times to restart.
How do I set the timeout duration on my vape?
Due to different vaping habits, you’re allowed to set the timeout duration from 5 to 15 seconds as you prefer. Press the fire button and right regulatory button simultaneously to enter into the menu system. Press the right regulatory button two times to enter the timeout duration setting.
How to use the Reuleaux RX200 box-mod?
How To Use The Reuleaux RX200 Box-Mod: Updating The Firmware To update the firmware on your Wismec Reuleaux first visit Wismec’s website and download the firmware updater for your device — Mac and Windows are supported. After doing that, remove the batteries from your device and plug the supplied USB cable to your device and computer.
What happened to the wismec Reuleaux RX200?
The original Wismec Reuleaux RX200 is now pretty old. It has been replaced by newer, more advanced models like the awesome Wismec Reuleaux RXGEN 3 – a triple 18650, 300W vape mod.
How do I unlock the resistance of the atomizer?
Resistance locked function: While the resistance sign blink, press the right regulatory button to lock or unlock the resistance of the atomizer. (Note: Such operation should be carried out at room temperature.) In TC mode, be careful to attach new atomizers that have cooled to room temperature.
How do you unlock a reuleaux rx200?
2:564:49Reuleaux RX200 by Wismec (TUTORIAL) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut we cannot adjust any of our settings using the power up or power down buttons and unlock wouldMoreBut we cannot adjust any of our settings using the power up or power down buttons and unlock would just hold power up power down and it will say unlock.
How do I change settings on Wismec reuleaux?
0:071:18RX GEN3 settings when mod is switched off - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn it back off press and hold the bottom two buttons that flicks the screen. And just press theMoreTurn it back off press and hold the bottom two buttons that flicks the screen. And just press the button repeatedly for 20 clicks and just completely rapidly.
How do I reset my geek vape counter?
Change Mode: 3 clicks of the fire button then using up down buttons to scroll. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button.
How do I reset my Voopoo puff?
Reset Puff Counter: Hold the fire button and bottom adjustment button together.
How do you reset a Wismec reuleaux?
0:322:03Puff And Time Counter Reset - WISMEC RX Gen 3 ReuleauxYouTubeStart of suggested clipEnd of suggested clipAnd you see the puff counter resets to zero from there we're going to do the same for the time. SoMoreAnd you see the puff counter resets to zero from there we're going to do the same for the time. So again push the power button three times push the left button.
How do I reset my Wismec R80?
Wismec R80 Pod Mod Display Functions5 Clicks on, 5 Clicks Off.3 Clicks when on will change display colour. Blue | Red | Gold.Hold Fire and Left Button to reset Puff Counter.Press and hold Left & Right button to lock wattage (Can still fire)When device is off – Press and hold Left & Right buttons to flip screen.
How do I reset my vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I reset my Geekvape boost pro?
Hold down the UP and DOWN button together to lock the settings. Hold DOWN & Fire buttons to reset puff counter. Three Clicks of the FIRE button locks the mod from firing.
How do I unlock my Geekvape?
Geekvape Aegis Max kits are shipped in locked position. This means that you need to unlock your vape by pushing the button 5 times quickly to unlock. Once it is unlocked, it will blink to confirm it is unlocked and will work. The other simple issue is that it is not charged.
How do I reset my Voopoo pro?
Argus Pro – FunctionsTurn the device on – 5 Clicks of the fire button.Adjust Wattage – Press/hold the + or – buttons.Lock Device – Press and hold the fire button and + button.Reset Puff Counter – Press and hold the fire button and – button.Change Modes – Press the fire button 3 times quickly.
How do I reset my Voopoo drag 3 puffs?
Changing The Display – Press and hold both variable wattage buttons to access the display menu. Then use the adjustment buttons to select which display orientation you want and hold the firing button to confirm. Reset Puff Counter – Hold the firing button and bottom variable wattage button.
How do you reset the puff counter on Voopoo drag?
You can also lock the buttons of the Drag X Plus by keeping the fire button and the + button pressed at the same time, and reset the puff counter, by pressing the fire button and – button.
How to adjust wattage in VW?
Under VW mode, the wattage can be adjusted by pressing the regulatory buttons, right to increase and left to decrease; Under TC/TCR mode, the temperature can be adjusted by pressing the regulatory buttons, right to increase and left to decrease.
How to repair a Wismec?
1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur .#N#2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use#N#3. Keep away from water.
How long does it take to set timeout on a vape?
Due to different vaping habits, you’re allowed to set the timeout duration from 5 to 15 seconds as you prefer. Press the fire button and right regulatory button simultaneously to enter into the menu system.
How to shut down a vape over 5s?
Once the duration is set (like 5 seconds), when you hold the fire button and vape over the pre-set time, it’ll display “OVER 5S PROTECT” and shut down automatically. Press the fire button 5 times to restart.
How to connect a new atomizer to a new atomizer?
Press the right regulatory button to confirm that a new atomizer has been attached. Press the left regulatory button to confirm that the same atomizer has been reconnected.
What happens if a new atomizer is not cooled down?
In TC mode, be careful to attach new atomizers that have cooled to room temperature. If a new atomizer has not cooled down before attaching, the temperature may read and protect incorrectly until the new atomizer cools.
How to unlock resistance on atomizer?
While the resistance sign blink, press the right regulatory button to lock or unlock the resistance of the atomizer. (Note: Such operation should be carried out at room temperature.)
What is intro vape forward classic?
Intro Vape Forward Classic is a great box mod, and it was released by Wismec. The screen of the device...
How to repair a Wismec?
1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.#N#2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use.#N#3. Keep away from water.
How to set timeout on a vape?
Due to different vaping habits, you’re allowed to set the timeout duration from 5 to 15 seconds as you prefer. Press the fire button and right regulatory button simultaneously to enter into the menu system. Press the right regulatory button two times to enter the timeout duration setting. Press the left regulatory button to set the duration and then press the fire button to confirm.
How to shut down a vape over 5s?
Once the duration is set (like 5 seconds), when you hold the fire button and vape over the pre-set time, it’ll display “OVER 5S PROTECT” and shut down automatically. Press the fire button 5 times to restart.
How to connect a new atomizer to a new atomizer?
Press the right regulatory button to confirm that a new atomizer has been attached. Press the left regulatory button to confirm that the same atomizer has been reconnected.
What happens if a new atomizer is not cooled down?
In TC mode, be careful to attach new atomizers that have cooled to room temperature. If a new atomizer has not cooled down before attaching, the temperature may read and protect incorrectly until the new atomizer cools.
What is intro vape forward classic?
Intro Vape Forward Classic is a great box mod, and it was released by Wismec. The screen of the device...
How to repair a Wismec?
1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.#N#2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use.#N#3. Keep away from water.
How to switch between VW TC and TCR?
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm.
