Press the fire button and “-” button at the same time. The number of puffs in a day is shown on the main interface, and it will be reset to zero the next day. 3. Enter the PUFF interface: Press the “+” and”-” button Exit the PUFF interface: Press and hold the fire button. Record the suction number of the recent 14 days in total.
How do I unlock my voopoo Vinci pod system?
VOOPOO VINCI pod system kits are shipped in a locked position. In order to unlock your device, simply click the ‘power button’ three times quickly. This will unlock your VOOPOO VINCI.
Do you vape or look at your puff counter first?
I prefer to vape, look at my puff counter, then reset to zero, than vape later on. If the puff counter cannot reset by user command while in use, than please Evolv make this happen on future E-scribe / DNA75 updates please.
Why is my voopoo Vinci vape leaking?
B) Cracked plastic: If your VOOPOO VINCI pod vape kit was dropped, or if it was in a pocket or purse that got bumped around a lot, it’s possible for the plastic to have broken and cause your VOOPOO VINCI to leak.
Are You having issues with your voopoo vape device?
More and more vapers got the voopoo vape devices, so may be some got the issues, today let’s check the issues and learn how to fix. the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.
How do you reset the puffs on Voopoo Vinci air?
1:185:16The VooPoo Vinci AiR Vape! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd in order to do that you hold down the fire button the waters now button down the same time backMoreAnd in order to do that you hold down the fire button the waters now button down the same time back to zero.
How do you clear the puff count on Voopoo drag?
- Turn On/ Off = Press fire button 5 times. - Clear puff count = Press the fire button and '-' (down) button simultaneously.
How do I change Voopoo Vinci settings?
Using the Voopoo Vinci is quite simple and operating it is pretty similar to other vape devices.Powering it on and off requires five firing button clicks.Tree firing button clicks will let you switch between manual mode, auto mode, and auto manual mode.More items...•
How do I reset my drag vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do you reset the puff counter on Voopoo drag 3?
Changing The Display – Press and hold both variable wattage buttons to access the display menu. Then use the adjustment buttons to select which display orientation you want and hold the firing button to confirm. Reset Puff Counter – Hold the firing button and bottom variable wattage button.
Why does my vape say Max puffs?
When the vape reminds for "max puff" or "puffs over", it means the vaping puffs have reached the Maximum.
How do you change the mode on Voopoo Vinci 2?
Operating either device is as straightforward as with any other VooPoo device: 5 Clicks of Fire Button = On/Off. 3 Clicks of Fire Button = Adjusts draw options between Auto, Manual, or Both (Only on Vinci 2).
How long does Voopoo Vinci last?
The Voopoo Vinci pod kit is powered by an internal 800mAh battery. Charging time is pretty impressive, taking approximately 70 minutes to fully charge via the on board 1 amp Type-C USB charger/cable. As a medium to heavy vaper, I was achieving a good 12 hours vaping from a fully charged battery.
How do I fix atomizer on Voopoo Vinci?
How to Fix Check Atomizer/No Atomizer with a Vape TankTry Another Tank/Mod.Clean Your Contact Points.Check the 510 Pin on your Tank. If the 510 pin on your tank is damaged (where it connects to the mod) then this will cause a “Check Atomizer” or “No Atomizer” error. ... Check the 510 Connector on your Mod. ... Reseat Your Coil.
How do you change Voopoo drag settings?
Changing modes: Tap the fire button three times to change from 'RBA' to 'smart' modes. The DRAG S also lets you change between drag and button tap firing.
How do you set up a Voopoo vape?
To vape with the Voopoo Drag Max, hold the fire button while puffing on the device's mouthpiece. Move the tab under the pod to adjust the device's airflow. The Voopoo Drag Max has a graphical interface with two different themes. To switch between the themes, press the “+” and “-“ buttons simultaneously.
Why is my Voopoo Vinci not working?
My VOOPOO VINCI is not firing when I push the button In order to unlock your device, simply click the 'power button' three times quickly. This will unlock your VOOPOO VINCI. The other possible problem is that it is not charged. Simply plug the unit into a charging area using a micro USB cord.
Why does my vape taste burnt?
If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning. Try using e-liquid that has a lower VG level (and higher PG level) to improve the flow of your e-liquid.
How often should I replace my vape coils?
Its best to replace your VOOPOO VINCI vape coils every 2-4 weeks.
Can you fill a pod with e-liquid?
A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid. Its a good idea to re-fill your pod before it becomes completely empty, as the last small amounts of e-liquid will have a difficult time getting to the coil to saturate the wicks.
Do you need to screw a coil in a pod?
Be sure to install a coil before using your device. The coil is also ‘push fit’ into your pod – so you don’t need to screw it in at all. Sometimes if the coil is misaligned and not sitting fully into the pod system, it can leak from the bottom of the coil.
chuckee
Just a quick question. I have no clue how to reset the puff counter on demand. I am using the VT75 Nano and coming from the Joyetech VTwo minis that have outstanding useability for on the fly adjustments while in operation.
cobalt327
Until the experts reply, I don't believe you can reset from the mod. You may well already be aware of this, but you can reset by going into the Device Monitor and selecting "Reset Statistics", though. This resets all the fields, including the puff counter.
chuckee
Thank you cobalt327 for the device monitor reset for puff counter information. I am quite honestly let down by the Evolv DNA75 in that for such an advanced vaporizer mod you would think they could come up with such a simple, working puff counter that could be reset on the mod.
cobalt327
I guess it's a matter of cost vs. demand, but I hear what you're saying.
Community
Heya all you absolute legends. Just want to say thanks for all your advice. This is an amazing community to be apart of and ty 4 all your help 😁😁
Switched from Caliburn to GeekVape Aegis. Help Please?
Two years since i puffed my last combustible puff. Hope you are all doing well.
Some noob questions about regular coil builds
I‘m Vaping since 2-3 years but only got into mesh builds so far. But my curiosity got me and I went out and purchased some „geekvape 2 in 1 coils“ from Amazon and put those into my profile rdta, dual coil build.
