Insert the coil into the bottom of your vape, and twist it clockwise until it is secure. The white cotton should face upwards toward your tank. You want the coil to be tightly in place but not overly rigid. Replace the tank after you put on the new coil. Once your new coil is in place, screw your tank onto the vape clockwise.
Full Answer
How to fix Smok coils that won’t work?
Typically, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this problem. If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low.
How do I perform a smok factory reset?
Learning how to perform a SMOK factory reset for Alien, ProColor, Priv V8, and other mods’ tanks is a handy skill to have. First, altogether remove the tank from the mod, making sure its screws are tightly fastened. Press the fire button, then reattach the tank. Choose “n” when the device asks if you are using a new coil.
What should I do if my Smok vape won't turn on?
If your SMOK vape isn’t turning on, it could be a quick fix: 1 Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to... 2 Check the battery to confirm that it’s properly inserted. Depending on your model, you might be able to pull out the... More ...
How to fix a vape that says “no coil”?
This is one of the most commonly-effective solutions to a “no coil” error message. Check the 510 connection. Located on the bottom of your vape tank, the 510 connection is a small metal prong that must maintain proper contact for your mod to work.
How do you reset a SMOK coil?
1. Please take off the tank and click the fire button, and then place that tank back on, click "n" when it asks "is it a new coil". 2. Please make sure screws are tight on the tank if you use the RBA coil on your mod.
How do I reset my SMOK vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you fix a coil on a SMOK vape?
Step 1 Coil. Unscrew the tank from the mod. ... Make sure there is no vape juice in the tank. You may dispose of any excess juice by pouring it into the trash. ... Disconnect the filter and the atomizer from the bubble tank. ... Unscrew the coil from the filter. ... Throw the old coil away. ... Screw the new coil into the filter.
Can you oversaturate a coil?
Flooding occurs when the coil becomes oversaturated with e-liquid. When this happens, the coil can no longer absorb and heat up more e-liquid. When you draw, the airflow brings up e-liquid leading to that bubbling and gurgling sound.
How do I reset my vape atomizer?
Take a screwdriver and gently push down on the 510 connector inside of the mod. This can help 'reset' the pin and allow it to spring back up. But if this doesn't work there isn't much else you can do.
Why is my vape not working SMOK?
If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
Why is my coil burning after 1 day?
Ensure Your Tank Is Properly Filled While this might seem obvious, the first port of call when your coil is burning is to ensure that it is properly saturated with e-liquid. Allowing your tank to run on empty while still vaping will inevitably cause dry burn, which can permanently damage the coil.
How do you know if your coil is burnt out?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do you prime a Smok coil?
0:451:52Priming a vape coil in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd add a drop onto each of the liquid inlet holes add a few drops onto the wicking material downMoreAnd add a drop onto each of the liquid inlet holes add a few drops onto the wicking material down the middle hole put your vape coil in your tank fill your tank with the liquid.
How do you Unsaturate a coil?
To prime a new coil, simply fill your tank with e liquid and leave it to stand for a few minutes before vaping. As above, this will allow the cotton inside your new coil to absorb plenty of e-liquid ready for that first, tasty vape.
Why is my vape crackling and spitting?
Trying to vape with the power too low is what causes excess e-liquid to build up in the coil head, resulting in it spitting hot vape juice. To clear the coil try turning the power up or flicking the device downward to remove the built-up liquid.
How do you fix a burnt coil?
How to Clean a Burnt CoilSTEP ONE: SOAK YOUR COILS. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.STEP TWO: CLEANSE YOUR COILS (optional) ... STEP THREE: LEAVE TO AIR DRY. ... STEP FOUR: PRIME THE COILS. ... STEP FIVE: REPLACE.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
What Material is Used in SMOK Coils?
Most SMOK coils are made using a material called Kanthal. However, for vapers that want to use other materials such as nickel or titanium, they do offer RBA units for their tanks.
Do SMOK Coils Use Temperature-Control Wires?
If you have an older SMOK device like the TFV4 tank, you may be aware that it uses some temperature control coils. However, newer models do not require these special coils. Making the upgrade to a newer SMOK device is always an option if you want to move on from temperature-control coil wires.
Building Your Own Coils
Many experienced vapers swear by building their own coils, and it can be a fun way to learn more about how to calibrate your vape experience. SMOK has created several RBA options including the TFV12 RBA deck, and the Turbo RBA head included with the full-size SMOK TFV8.