Press the fire button 5 times within 2 seconds to either lock or unlock the device. While the mod is locked, press the fire button for 3 seconds to turn the system off. To turn the mod back on press the fire button 5 times rapidly.
Full Answer
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
Why is my aspire vape not producing vapour?
Taking a draw with a fully charged and seemingly working device only to produce no vapour is an annoying one of the Aspire vape problems, to say the least. This could be down to a couple of problems. Make sure you check that everything is connected tightly.
How do I replace the coil on my aspire Revvo atomizer?
Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time. The Aspire Revvo tank has a unique design and an unusual method for replacing coils. To get started, twist off the tank’s top hardware. You’ll see the cone-shaped retaining nut that holds the coil in place.
What are the features of the vaper mod?
It is small, sleek, and fits comfortably in the hand. It features a micro-USB charging port, 5 power options changed with the press of a button, and the 900mAh battery will last any vaper all day! The mod is also compatible with most cartridge style tanks for increased versatility of use!
How to reset puff counter on Aspire?
- Turn On/ Off = Press fire button 5 times. - Clear puff count = Press the fire button and '-' (down) button simultaneously.
How to reset puffs on Aspire Zelos 3?
0:322:03Puff And Time Counter Reset - WISMEC RX Gen 3 ReuleauxYouTubeStart of suggested clipEnd of suggested clipOne two three okay push your left button takes you down to your puffs. Okay from there you're gonnaMoreOne two three okay push your left button takes you down to your puffs. Okay from there you're gonna hold your power button for five seconds.
How do I adjust my Aspire nx30?
2:505:28Aspire Rover X30 Starter Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus button and five Dainius li to change the annex 32 voltage mode as shown by a V in theMorePress the plus button and five Dainius li to change the annex 32 voltage mode as shown by a V in the left corner of the display. This will simply send the desired volts to the tank.
How do I unlock my Aspire Zelos?
2:485:48Aspire Zelos 50w Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress again five times to unlock pressing the fire button times will turn on stealth mode and turnMorePress again five times to unlock pressing the fire button times will turn on stealth mode and turn the display off the unit will still operate. Press again three times to turn the display.
How do I reset my vape count?
Change Mode: 3 clicks of the fire button then using up down buttons to scroll. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button. Brightness Up: Press and Hold Fire & + button.
How many puffs should a vape coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
How do you unlock an Aspire NX40?
Aspire Rover 2 Kit – How To Use The NX40 Mod In standby mode press the fire button five times to lock the device. While locked hit the fire button five times to unlock.
How do you use the Aspire vape?
0:221:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace. Simple.
How do you fix an e cig when it says no atomizer?
RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)
How do you unlock a vape mod?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do I unlock my Aspire BP80?
Aspire BP80 Button OperationsOn/Off = Press Fire button 5 times in quick succession.Lock/Unlock '+'/'-' buttons = Press Fire button 3 times in quick succession.Reset Puff Counter = Press '+' and Fire button simultaneously.Enter Menu = Press '+' and '-' simultaneously.More items...•
How do I unlock Zelos 3?
2:414:1230 Comments - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you can lock it in place by clicking the trigger button three times the z3 mod has otherMoreAnd then you can lock it in place by clicking the trigger button three times the z3 mod has other features and to access the menu of other features first you need to unlock it again so three clicks.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
Aspire NX75 CNC Edition (NX75-S & NX75-A)
The NX series is Aspire’s over-engineered, over-designed, yet refined NX75 box mod. The five button system is ultra-intuitive with one button navigation between Temperature Control and Wattage mods. The NX series represents a long time of development and thought by the Aspire R&D team. The NX series ushers in a new Era for Aspire vaping gear.
Aspire NX75 Premium CNC Finish
Elegance starts with precision design, stringent testing and aesthetics. The NX75 CNC editions come in Stainless Steel (NX75-S) and Aluminum (NX75-A). From the first moment you handle the NX, you will feel the quality engineering.
Aspire NX75 Logo Customization&Child Lock
The NX75 allows you to customize your mod with just a few button clicks. No firmware or connecting to computer required! Ease-of-Use is a key feature of the NX75. Change Logo function: Press ”T” and ”-” simultaneously for 2 seconds to enter or exit change logo settings.
Aspire NX75 5-button Navigation Diagram
The NX75’s Five button system and high resolution OLED screen makes it extremely easy to operate. A) Fire button B) W (Wattage) button C) T (Temperature Control) button D) “-” (Minus) button E) “+” (Plus) button
Aspire NX75 Mode Quick Select Keys
Navigate through different vape modes with quick button combo. Simply press “W” and “T” button to easily switch between Wattage and Temperature modes.
Customizable Firing Button Profiles (CFBP)
The all-new CFBP feature allows for heat ramp-up (power curve) to be fine-tuned. This customization can be made with just a few clicks of the NX mod buttons. There is no need to connect to computer to program settings making this function very easy to configure.
Aspire NX75 Battery Installation
Insert the Aspire 18650 battery into magnet door positive (+) down. Attach the battery door onto the NX75 mod.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to replace glass in Aspire Triton?
To replace the glass, disassemble your tank and remove any glass fragments with tweezers. Push gently to get the replacement glass sleeve into position and reassemble the tank. Note that in the Aspire Triton, the glass is a permanent part of the upper hardware.
Frenkyou Super Member ECF Veteran
Aspire BP60 MTL + DTL is the new Aspire system in the Pod Mod segment; it enjoys a very effective air regulation system, the cartridge can contain up to 5ml of liquid (2ml TPD).
Frenkyou Super Member ECF Veteran
The bottom of the Pod recopyed the compartment, four magnets and two "air-Switches" holes. The coil insertion method is of the push and pull type.
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
What is bypass mode?
Bypass mode gives you the experience of raw power of your battery to heat your coils. Here you can build your coils at lower resistances than is normally accepted by power or temperature control mode, meaning that the power of the hit will be determined by the sheer state of you battery and the resistance of the atomizer.
vgodbabyy Full Member
so I have an old aspire pockex that I’m trying to get to work. It doesn’t fire or anything, yet the fire button lights up blue when I hold it down. Is it just a connection issue? How do I fix this? The battery is fully charged and has been for quite some time now
OhmAlone Full Member
Is it possibly locked? Try hitting the fire button five times and then try
Baditude ECF Guru ECF Veteran
The only thing I can think of is the battery is old and no longer holds enough charge to fire a coil. Or the chip is malfunctioning. If you have a new coil, try that.
