how to reset argus vape

How do I reset my Argus puff counter?

5 clicks of the fire button to turn the mod off and on. Clicking fire button and down, resets your puff counter.

How do I fix my Argus vape?

If your Voopoo Argus Air isn't vaping, the first thing that you should do is make sure the device isn't turned off. Press the fire button five times. If that doesn't resolve the issue, connect the Argus Air to your computer until the battery is fully charged, and then try vaping again.

How do I factory reset my vape drag?

0:040:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do you unlock the Voopoo Argus vape?

Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO Argus GT is shipped in a locked position to prevent accidentally turning on during shipment. If you click the power button five times quickly it should unlock your device.

Why is my vape not working?

There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.

How do you fix a vape that won't smoke?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.

How do you reset a vape mod?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

How do I refresh my vape?

So, carefully remove the coil from the hot water and submerge it in the cold water. With this, any remaining debris will fall off, and your coil will be clean again. If you have done this and still experience the annoying burnt taste vape, then you can clean it using vinegar or lemon juice in hot water.

How do I set TC mode?

How to vape in TC. Put your mod into TC mode and select the corresponding wire type for the coils you have. If the mod has a TCR you can enter the exact TCR value. After that, ensure that your mod and tank are both at room temperature so the temperature readings will be more accurate.

How long does Voopoo Argus last?

With regards to battery life, that always depends on how much you vape and at what wattage but I've happily enjoyed a days battery life at 35 watts and more so using the MTL coil at 12 watts. With regards to charging, the Argus takes a little over an hour to charge which I'm happy with.

Why is my vape locked?

The most common cause of having a locked vape is a dead battery. Try charging your vape for 10 minutes and unlock it to see if this has any impact on it. You will know that your vape is charging as most vapes emit a light to indicate the charging process.

VooPoo Argus Design Quality

The Kit is constructed from zinc alloy and a leather patch on the grip to deliver comfort when in use. Besides that, the construction's sleek design and lightweight design make it very portable and easy to carry around.

VooPoo Argus Battery Functionality

VooPoo Argus has an inbuilt battery of capacity 1500mAh which support fast charging. It is normally charged using a Micro USB cable which might take very few minutes to charge it.

The PnP Pods

The pods are equipped with a 0.3ohm coil of wattage that ranges between 32-40W and a 1.2ohm coil. It allows an airy vape with massive clouds and good flavor production. The pods are only compatible with the entire PnP coil range.

How to use the VooPoo Argus Vape?

Once the pod is already charged and filled with the e-juice, the vaping process is about to begin. Press the fire button rapidly five times to turn on the device. Once it is on, the Pod kit automatically recognizes the connected atomizer’s coil and sets itself to the appropriate wattage.

VooPoo Argus Pod Kit Review

The Kit comes with two pods and two mesh coils. The two pods have a capacity of 2ml but work differently; one only works mouth to lung, and the other works direct vaping. The coils have different resistance for the mesh coils, that is, the PnP VM1 0.3Ohm and PnP TR1 1.2Ohm.

FAQS about VooPoo Argus

This will depend on how frequent you vape and at what wattage. For example, at a wattage of 35W, it may last for quite some time. When it comes to charging, it takes very little time to charge using the Micro USB cable.

Alternative vape: UPENDS

UPENDS is the new rising e-cigarette brand. With this device, you can put the flavor of your choice. UPENDS is still the leading brand and wholesaler of vaping products.

Why is my Voopoo Argus GT not working?

The most common reason your VOOPOO Argus GT is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO Argus GT is shipped in a locked position to prevent accidentally turning on during shipment. If you click the power button five times quickly it should unlock your device. The LED screen will turn on and show the VOOPOO symbol to indicate it is unlocked.

How does vaping work?

Vaping devices use the power of your inhale to pull e-liquid to the heating coils and mix with the vapour. If you pull very long and hard on the device it is possible for some e-liquid to be pulled into the airflow chambers. For all types of vaping, slow long drags are recommended.

Why does my e-liquid leak?

Over heating the device can cause the e-liquid to expand pushing it out through the coil and out the mouthpiece, causing it to le ak. Temperatures raising expand the size of the molecules of the e-liquid, and if your tank is full to begin with, your e-liquid will have no where to go but to leak out of the pod.

Can a vooo argus crack?

The plastic in the Argus GT can also crack if it is left below freezing temperatures for a period of time. C) Coil installed incorrectly: The VOOPOO Argus GT has a unique coil that easily pushes into the pod, simply push the coil in until it is secured tightly into the pod. If it is in incorrectly then the coil will not sit flush with the device.

Community

Heya all you absolute legends. Just want to say thanks for all your advice. This is an amazing community to be apart of and ty 4 all your help 😁😁

Switched from Caliburn to GeekVape Aegis. Help Please?

Two years since i puffed my last combustible puff. Hope you are all doing well.

Some noob questions about regular coil builds

I‘m Vaping since 2-3 years but only got into mesh builds so far. But my curiosity got me and I went out and purchased some „geekvape 2 in 1 coils“ from Amazon and put those into my profile rdta, dual coil build.

Can Not Recognize The Atomizers

the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.

Coil Burnt Issue

If the coil burnt out within a short time, follows might be the causes to the issue: 1. Did not prime the coil before vaping. 2. The e-juice you fill is not enough. 3. Improper vaping settings of power. 4.you vape too frequently.