- Method 1 of 3: Disassembling the Vape. Unscrew the tank from the body of the vape to expose your coil. ...
- Method 2 of 3: Adding a New Coil. Pre-saturate your coil with 5-8 drops of vape juice. ...
- Method 3 of 3: Knowing When to Replace the Coil. Replace the coil every 1-2 weeks on average. ...
How to know when to change vape coil?
Jul 14, 2016 · Misthub's Tutorial Blog Page: https://www.misthub.com/blogs/vape-tutorialsIn this tutorial, we demonstrate how to correctly change the coil in Innokin's iCle...
When to change your vape coil?
May 15, 2019 · After the coil is fully saturated, take the glass and attach it to the tank top. Then take the attached pieces and screw them into the coil and base hand tight. Remember what I said about over-tightening.
What is the best coil for vaping?
Jul 20, 2017 · Step One: Empty out your vape tank if necessary. Step Two: Unscrew the base from your tank. Step Three: Unscrew your coil, then separate the top portion of your tank so you can replace your coil. Step Four: Attach your new coil to your tank, then re-attach your atomizer parts in the reverse order you took them apart.
Should I replace all ignition coils at once?
Mar 14, 2020 · To install a replacement coil, screw the coil firmly into the tank’s bottom hardware. Take a bottle of e-liquid and place a bit of juice on each of the coil’s wick openings until you no longer see dry cotton. Reassemble and fill the tank. Wait several minutes before vaping to ensure that the cotton is completely soaked.
A Brief Atomizer Breakdown
To start things off, let’s go through a quick refresher course. What is an atomizer? Vape fans usually have a basic understanding of the term and h...
Other Atomizer Variations
As if cartomizers and clearomizers weren’t enough, there are also a couple other different types of atomizers. Certain atomizers come with multiple...
Replacing Your Cartomizer
As aforementioned, most cartomizers are disposable, which makes replacing them very simple. 1. Step One: Begin by removing the drip tip from your c...
Replacing Your Multiple Coil Atomizer
Multiple coil atomizers are great for those seeking a lavish, extra-indulgent vape experience. Changing the coils for this type of atomizer is much...
Replacing Your Top Coil Clearomizer
Top coil clearomizers are perfect for vape wizards seeking a cloud chasing experience that provides warm, flavorful vapor and thick, vibrant clouds...
Replacing Your Bottom Coil Clearomizer
Replacing a bottom coil clearomizer is much like replacing a top coil one, but with one extra benefit—you can do it without having to empty out y...
Replacing Your Sub-Ohm Atomizer
Sub-ohm tank atomizers provide cloud chasing experts with the thick, cool vapor they crave and the freedom to have extra control over their clouds....
Why You Should Regularly Clean Your Vape Tank
Having a clean tank is the easiest way to ensure that you’re getting the optimal performance out of your tank.
Disassembling The Tank
To take your tank apart, start by gripping both the top and the base of the tank.
Need Further Help?
At La Dulce Vapor Lab, we offer tank cleaning and coil replacements free of charge!
What is an atomizer?
In the simplest terms, the atomizer is the device that turns your e-liquid into smooth, savory vapor. It is powered by your mod or pen’s battery, which heats up your coil and warms your e-juice so that the liquid reaches the optimum point of vaporization and allows your vape to do exactly what it’s meant to do.
How long does a vape coil last?
The answer to this varies depending on how frequently you vape, but typically, the average lifespan of a coil is around two weeks (this can depend on a variety of aspects!).
Do atomizers have coils?
As if cartomizers and clearomizers weren’t enough, there are also a couple other different types of atomizers. Certain atomizers come with multiple coils. This allows heat to spread evenly throughout the atomizer, which results in cooler vapor with a stronger throat hit.
What is a multiple coil atomizer?
Multiple coil atomizers are great for those seeking a lavish, extra-indulgent vape experience. Changing the coils for this type of atomizer is much like changing the coils for any other atomizer, except you’ll be changing multiple coils instead of just replacing one.
How to use RBA?
To use an RBA, you must build your own coil (which means you will physically wrap the coil by hand), attach it to your atomizer, and insert your own wick for a one-of-a-kind vape experience. The final type of atomizer is the sub-ohm tank. Sub-ohm tank atomizers use coils that provide less than 1 ohm of resistance.
How to replace a cartomizer?
As aforementioned, most cartomizers are disposable, which makes replacing them very simple. Step One: Begin by removing the drip tip from your cartomizer. Step Two: Remove the cartomizer tank from your vape’s battery. Step Three: Pick up your replacement cartomizer and place it right side up.
How to change clearomizer coil?
Step One: Invert your clearomizer so it is upside-down. Step Two: Unscrew your base and atomizer head from the bottom. The stem will remain intact inside your clearomizer. Step Three: Screw on your new coil, and reattach the base and head in the reverse order you took them apart.
How to Take Apart a Vape Tank
In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads.
How to Remove Stuck Glass From a Vape Tank
One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.
How to Disassemble a Vape Tank With a Locking Chimney
While the disassembly instructions that we provided above will work with almost all of the tanks on the market, there are a few tanks with unique designs. One of the best known of those is the Uwell Crown 3 (since replaced by the Uwell Crown 4, which has a different design).
How to Remove and Replace a Vape Coil
The most common reason for wanting to take apart a vape tank is because you’re replacing the atomizer coil. As we mentioned above, the atomizer coil usually screws into the tank’s bottom hardware, and you can remove it by twisting it counterclockwise.
How to Remove Broken Glass From a Vape Tank
As we’ve just explained, a vape tank’s glass enclosure can be an extremely stubborn component to remove. That’s even more problematic if you happen to break the glass because you’re going to encounter some sharp shards when you try to remove the remaining pieces.
How to Take Apart a Stuck Vape Tank
So far, our instructions for disassembling a vape tank have focused on taking your tank apart when it isn’t giving you any problems.
How to clean a vape tank?
The steps for a thorough clean are: 1 First, detach your tank from your vape, empty it, and disassemble it. 2 Dampen a cloth with alcohol (you can use ethanol or even vodka) and scrub each piece to get rid of build-up/stains. 3 Rinse each piece with water and wipe it with a damp cloth, making sure to get rid of all the alcohol left behind. 4 Let the pieces of your tank air dry for 10-15 minutes. Then reassemble your tank, fill it with your delicious liquid, and carry on vaping
What is a vape coil?
The vape coil is the heating element you’ll find inside your device. Coils can be split into two types: Rebuildable Coils and Stock Coils. Stock coils are ready-made coils that can usually be fastened onto the device by your hand.
What is a rebuildable coil?
Rebuildable coils, however, are ones that will need to be attached by using a small screwdriver, or similar tool. Rebuildable coils need to be ‘rewicked’ by the user and don’t come with cotton already installed. Now, dirty coils can be the bane of any vaper’s day. You’ll know your coils need to be cleaned if:
What to do after vaping?
After having your vape for a while, you’ll definitely want to start doing some basic vape maintenance—mainly, cleaning your device. A dirty vape has a huge effect on your vaping experience, robbing you of the thick, delicious clouds that you’re looking for. Keeping the different parts of your device clean will help you keep getting those flavorful ...
How to clean a sandbox?
Dampen a cloth with alcohol (you can use ethanol or even vodka) and scrub each piece to get rid of build-up/stains. Rinse each piece with water and wipe it with a damp cloth, making sure to get rid of all the alcohol left behind. Let the pieces of your tank air dry for 10-15 minutes. Then reassemble your tank, fill it with your delicious liquid, ...
What happens if your e-liquid tank isn't cleaned?
E-liquid starts to solidify and ‘gunk’ up the glass, while every new flavor takes on a sickening brown-ish color.
