How do I charge the itaste VV battery?
The iTaste VV 3.0 has a micro USB port in the bottom, and this is where you charge the battery. Insert the micro USB into the bottom of the device, and then plug the other end of the USB into a computer or charger adaptor. The power/fire light will be green when it’s fully charge, yellow when it’s half charged, and red when it’s almost dead.
What is the innokin itaste VV battery?
The Innokin iTaste VV 4.0 Battery is a variable voltage and variable wattage device, allowing for a customized vape that will suit your specific needs. The ability to control the voltage and wattage output provides for an unsurpassed vaping experience.
How do I control the temperature of my itaste VV?
The iTaste VV 3.0 has variable wattage and voltage settings that let you control the temperature of your vapor. You can customize your vape by changing the settings. To check the settings, turn the device on by pushing the power/fire button three times. Hold the + and – buttons together for two seconds.
What's new with the itaste MVP pro?
The iTaste MVP 3.0 pro has been released. Aside from looking like the previous iteration, the iTaste MVP 3.0 comes with top-of-the-line advanced features, including a nice golden mod. Who doesn’t like gold? We sure do. Imagine the MVP 3.0 pro in a gold, premium finish. Simply wow!
How do I change the voltage on my iTaste?
With the iTaste VV 3.0, you can either control it by wattage or voltage....Switch to the voltage control.To switch to voltage control, hold the fire and – buttons.Use the + (increase) or – (decrease) buttons to change the voltage when the display is on the U reading.The higher the voltage, the higher the temperature.
How do I charge my iTaste MVP?
0:043:27Innokin iTaste MVP: Starter Kit instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a 3 click turn on 3 click turn off it's got those three colors the green means that the batteryMoreIt's a 3 click turn on 3 click turn off it's got those three colors the green means that the battery is fully charged yellow means it's halfway and the red means it's about to die.
How do I charge my iTaste EP?
0:422:21iTaste EP Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're gonna need through USB. You just give a little twist. There you go you're just gonna takeMoreYou're gonna need through USB. You just give a little twist. There you go you're just gonna take this in and put it into the wall Bridgeport all right over here. And now it's all ready for the outlet.
What is a iTaste VV?
The Innokin iTaste VV 4.0 Battery is a variable voltage and variable wattage device, allowing for a customized vape that will suit your specific needs.
What is a iTaste MVP?
The iTaste MVP 2.0 is a 510/Ego threaded device with a built-in 2600mAh battery. This box mod is loaded with features such as VV, VW, passthrough function, LCD screen, ohm meter and can even be used as an on-the-go charger for your portable devices.
How do you use Itaste?
0:291:59Innokin iTaste VV V3.0 Express Kit: "How To Product Demonstration"YouTubeStart of suggested clipEnd of suggested clipThere are three main buttons on the I taste. The power button the plus button and the minus buttonMoreThere are three main buttons on the I taste. The power button the plus button and the minus button to turn the itaste on or off simply push the power button three times until it flashes.
How do you use an innokin vape pen?
After you've charged the battery and filled the tank, it's time to start vaping with the Innokin Go S. Press the fire button five times quickly to turn the device on. To vape, puff on the tank's mouthpiece while holding the fire button. To adjust the tank's airflow, rotate the collar on the bottom of the tank.
uwantemugotem New Member
My two month old (and now out of warranty) iTaste vv/vw v3.0 battery will charge but won't heat up. Brought it to the store and the clerk tried it on a couple different tanks, cleaned the connection point etc. and had the same results that I did. Last night before bed I put it on the charger and this morning it would not work.
Baditude ECF Guru ECF Veteran
Use a precision screwdriver or nail file to tease/pry the center pin up 2 - 4 mm. so the battery can make contact with your tank 's center pin. If you are using a tank with a 510 connector, do the same thing if applicable. A tank's center pin should be the same length as the outer threaded ring.
DavidOck ECF Guru ECF Veteran
Be sure to turn it OFF before adjusting the center pin - 3 fast clicks on the VV3. And maybe shoot for only about 1 mm first, and give it a try. It's possible to wiggle it all the way out, and then it probably is trash
geekmedic Senior Member Verified Member ECF Veteran
Can you get a resistance reading from of your topper on the VV? With the VV place your topper on, press both the + and - at the same time, what does it say? Also what is the second reading after checking the resistance? If the VV is fully charged it should read 4.1
issy Super Member ECF Veteran
This happened with mine. I tried lifting up the center pin, but didn't make a difference. Fwiw, I gave it to a friend, she's on here...siskysouth. Shoot her a PM and ask how she got it to work again (ask her about her black itaste vv/vw).
joesquid Ultra Member Verified Member ECF Veteran
Everything these folks are telling you is right on. However, Innokins warranty is 90 days. Go to their website and submit a ticket. I did and they called my vape store who promptly replaced my vv V3
uwantemugotem New Member
Thanks for the very Fast responses....probably less than two minutes!!! Worked like a charm. I still have to mess around with it a little bit but at least I am getting the vape from my unit!
How long does the iTaste MVP 3.0 Pro last?
Due to a huge battery, the iTaste MVP 3.0 Pro works for 2 days on a single charge (phone charging excluded).
How many watts does the Innokin iTaste MVP3 have?
Indeed, the previous models lacked a mid-range device in their line. Namely, the iTaste MVP had a maximum output of 20 Watts, whereas the MVP 4.0 had an output of 100W.
Is Innokin MVP 3.0 Pro good?
Although the device might have its fair share of issues, the Innokin iTaste MVP 3.0 Pro is a nice product. It has a rechargeable battery that can charge your phone and a 510 connector. Oh, and let’s not forget about the build quality. We mentioned it throughout the review, but hear us out, it’s good.
Innokin iTaste MVP 3.0 30 Watt
The Innokin iTaste MVP 3.0 comes with 3800mah battery capacity, up to 30W and can handle low resistance atomizer as low as 0.4ohm.
Ratings & Reviews
Review's title & body can't be empty Question's body can't be empty Please enter a star rating for this review Name field cannot be empty Invalid email Your review has already been submitted. Max length was exceeded Please fill out all of the mandatory (*) fields One or more of your answers does not meet the required criteria
What is SSL in vapor?
Rest assured that when purchasing from Vapor Authority, all of your information is transmitted using Secure Sockets Layer (SSL), which encrypts your data.
Does Vapor Authority ship knockoffs?
Vapor Authority does not carry any clones or knockoffs whatsoever—guaranteed! Same-Day Shipping: At Vapor Authority, we are dedicated to providing you the best shopping experience possible. To help further this effort, we offer same-day shipping on all orders placed by 12:00 PM (Pacific Standard Time).
Smithsonian
I just received my iTaste VV v3.0 express kit and my Kangertech EVOD clearomizer in the mail today. I filled the EVOD, attached it to my iTaste battery, but it won't vape. When the clearomizer is not attached to the battery, the battery works normally.
Smithsonian
The battery reads 1.9, the coil is listed at 1.8. I tried switching out a replacement coil. Same thing. Just a solid green for 5-6 seconds when I hit the fire button. It was reading 2.0 earlier so the readings are not consistent.
Smithsonian
Well, my mod works now. I honestly have no idea why it wasn't cooperating yesterday, but today I said what the hell and tried it again, and now it's vaping great. Thanks for all the help.
Bebop
Thanks for all the help. This site is awesome and I'll write some reviews on this mod, and in the future I've decided I'm better off coming here for customer support than the actual manufacturer or vendor lol. Go figure.
Smithsonian
I lied... the same problem keeps arising. Let me refresh and give you some more info to see what you think. So when my clearomizer is not attached to the battery, the battery works fine and appears to be functioning properly. I've charged it fully, so the batt life isn't the problem.
Bebop
1) you are cranking up the voltage too high for that coil (1.8) on that coil I would expect you to taste burnt at 3.6 or higher.
Smithsonian
I have 50VG/50PG juice from ecblends.com. I had my voltage and wattage down all the way (3.3, 6.0) when I was vaping at first and I didn't crank it up too high while I was increasing. I quickly dry burned it a few times, with the V/W all the way down, only firing it for 2-3 secs a few times.