
Is the geekvape aegis user manual too complicated?
If the Geekvape Aegis user manual seems too complicated, then you might like to opt for this Nano starter kit instead. It has bright colors and is more affordable compared to the L200 and Legend models.
What is the difference between the Geek vape aegis nano and legend?
It has bright colors and is more affordable compared to the L200 and Legend models. Features that stand out on the Geek Vape Aegis Nano are the 5-30W wattage range, the voltage range of 0.1-0.6 volts, and the resistance range of 0.2-3ohms.
How many batteries does the geekvape aegis legend have?
It’s powered by two 18650 batteries and has a glass tube to contain vape juice. According to the details in the Geekvape Aegis user manual PDF, a range of specific parameters apply to the Geekvape Aegis Legend.
Why won't my e-juice turn into vapor?
The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.

How do I change the coil on my GeekVape Aegis Mini?
How To Change The Coil HeadRemove the tank from the mod.Turn the tank upside down and unscrew the base.If a coil is installed unscrew it from the base.Screw a new coil into the base.Replace the base onto the rest of the tank.More items...•
How do you remove Aegis coil?
1:192:44GeekVape Aegis Boost Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo remove your pod press down on the catch located at the back of the device like so and then removeMoreTo remove your pod press down on the catch located at the back of the device like so and then remove. To replace the coil turn the pot over to reveal its base. And then pull the coil out.
How do you put a coil on Aegis hero?
3:387:11Coil Corner Ep4. Aegis Hero review/coil change - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis out you have these slots on each side the flat side of your coil is going to sit in as you canMoreThis out you have these slots on each side the flat side of your coil is going to sit in as you can see that. Just set it down inside making sure once you press it in. Press it down all the way.
How long do the coils last in a GeekVape aegis?
The Aegis Boost has a 1500mAh battery and battery life is very good. Vaping at 20W with the 0.6ohm coil lasted me over two days of use and over two full refills. The 0.4ohm coil at 25W lasted around a day and a half. The Aegis Boost has micro-USB charging and charges at 1.5A.
How do I open GeekVape aegis?
To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery. The Geek Vape Aegis Solo won't operate if it doesn't have a solid electrical connection from the battery to the atomizer coil.
How do you take the coil out of a vape?
2:105:16Vape Tutorial: How To Change Coils On Vape Tanks & ClearomizersYouTubeStart of suggested clipEnd of suggested clipSimply hold the chimney with one hand and twist the coil until it's removed with the other grab yourMoreSimply hold the chimney with one hand and twist the coil until it's removed with the other grab your replacement coil and thread it on to the base of the chimney.
What coil does aegis hero use?
1.2ohm B Coil (10 - 14W) Satisfying MTL or DTL vaping.
Which coil is best for Aegis hero?
I've found that the 0.4 ohm coil is best for me, it provides a nice dense vape at just the right wattage to give me a nice warm and flavourful vape. The 0.6 ohm is quite good too, but will give you a cooler vape, great flavour, but not quite as dense of vapour as the lower resistance coil.
How do I know if my coil is burnt?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.5 signs that show it's time to change your vape coil - Vapouriz Bloghttps://www.vapouriz.co.uk › blog › vaping-guides › 5-si...https://www.vapouriz.co.uk › blog › vaping-guides › 5-si...
Why is my coil burning after 1 day?
Ensure Your Tank Is Properly Filled While this might seem obvious, the first port of call when your coil is burning is to ensure that it is properly saturated with e-liquid. Allowing your tank to run on empty while still vaping will inevitably cause dry burn, which can permanently damage the coil.Why do my coils keep burning out? | Tips | Blog - EDGE Vapinghttps://www.edgevaping.com › blogs › why-do-my-coils-...https://www.edgevaping.com › blogs › why-do-my-coils-...
How do you know when coil is bad vape?
Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.When and How to Change Your Vape Coil: Everything You Need to Knowhttps://www.atmosrx.com › blog › 2018/10 › 4-tell-tale-si...https://www.atmosrx.com › blog › 2018/10 › 4-tell-tale-si...
Why does my vape spit back?
Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.
Why is my e juice not turning into vapor?
The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.
How to fix a sub ohm tank leak?
Here are some tips to avoid leaking: 1.Please close the airflow holes when you refill the tank, and do not saturate the coil directly with juice dropping to the inner coil, you just need to fill the tank and wait around 10mins.
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
How long does it take for a mod to sit?
You need to take out the batteries (if it is replaceable) and let it sit for 30 minutes. If your device becomes too hot that you can't touch it, or if the mod keeps on showing overheat protection even if it is not hot, please click here to contact us.
Is Aegis Legend shockproof?
Aegis Legend: Waterproof Statement. As we all know Aegis lines are waterproof, shockproof, and dustproof. This article will talk about the waterproof feature of the Aegis lines. To know more about the product's shockproof feature, please click here.

General Queries
- Here is our official online store, which is operated by one of our distributors, https://store.geekvape.com/ If you have any queries or concerns about your order in our official online store, pleas...
- If you have any interest to wholesale our products, please contact our sales department at [email protected]
- Here is our official online store, which is operated by one of our distributors, https://store.geekvape.com/ If you have any queries or concerns about your order in our official online store, pleas...
- If you have any interest to wholesale our products, please contact our sales department at [email protected]
- Please share your social media account to us, and our service team will forward to our promotional team, if we willing to start collabration with you, our PM will contact you.
Mod Issue
- Which batteries should I use, and where should I buy them? Battery information guide If you're using 18650s in a regulated device, your best bet is the Samsung 30Q, Sony VTC6, or the LG HG2. If tho...
- Why my mod becomes hot or even shows overheat protection? Normally if you vape for a long time, the device or the tank will become too hot. It will show overheat protection and an…
- Which batteries should I use, and where should I buy them? Battery information guide If you're using 18650s in a regulated device, your best bet is the Samsung 30Q, Sony VTC6, or the LG HG2. If tho...
- Why my mod becomes hot or even shows overheat protection? Normally if you vape for a long time, the device or the tank will become too hot. It will show overheat protection and and you can not vape...
- If your device have lines in screen, or the whole screen is black or white but still works, please turn off the mod and do a factory reset. This procedure applies to other Geekvape device as well....
- Check if there is any oxide in the battery connection part, clear it and try to turn on the device …
Atomizers
- If your coil is only slightly burnt, you may get a slight burnt taste, as if something’s not quite right. Given that we know that burnt coils can produce harmful chemicals, you should probably stil...
- 1. Press top cap and move it or press the open button 2. Add e-juice through the fill port 3. Close the top cap and stand it for 5-10 mins to get the cotton completely saturated 4. Set a p…
- If your coil is only slightly burnt, you may get a slight burnt taste, as if something’s not quite right. Given that we know that burnt coils can produce harmful chemicals, you should probably stil...
- 1. Press top cap and move it or press the open button 2. Add e-juice through the fill port 3. Close the top cap and stand it for 5-10 mins to get the cotton completely saturated 4. Set a proper wat...
- Here are some tips to avoid leaking: 1.Please close the airflow holes when you refill the tank, and do not saturate the coil directly with juice dropping to the inner coil, you just need to fill th...
- Why is my tank gurgling when I try to vape and/or why is the e-juice spit backing in my mouth…
Pod System
- Why is my device heating up? 1.Normally if you vape for a long time, the device or the tank will become hot, or the red lights flashes 10s, You need to turn off the device and make it still for 30...
- If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil an…
- Why is my device heating up? 1.Normally if you vape for a long time, the device or the tank will become hot, or the red lights flashes 10s, You need to turn off the device and make it still for 30...
- If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try ag...
About Aegis Lines
- Press the fire button three times in quick succession within 2s to enter the setting mode, then press and hold the “+” or “-” button for 2s at the same time to enter the menu. Press the left or rig...
- Aegis Mini is powered with 2A fast charging, which can charge up to 80% in just 30 minutes when you use 5V/2A charging head, but it needs around 2 hours to be fully charged. Why? It d…
- Press the fire button three times in quick succession within 2s to enter the setting mode, then press and hold the “+” or “-” button for 2s at the same time to enter the menu. Press the left or rig...
- Aegis Mini is powered with 2A fast charging, which can charge up to 80% in just 30 minutes when you use 5V/2A charging head, but it needs around 2 hours to be fully charged. Why? It depends on lith...
- As we all know Aegis lines are waterproof, shockproof, and dustproof. This article will talk about the waterproof feature of the Aegis lines. To know more about the product's shockproof feature, pl...
Geek Vape Aegis Product Overview
- The specific product we’ll be covering from the Geekvape Aegis range is the Geekvape Aegis Legend. It’s a box mod with a stylish and modern design that will definitely serve you well.It features a colored display screen that will provide information like the current wattage, and it also has a function button to help you interact with it. Venting holes on the base of the Geekvape Aeg…
Product Parameters
- According to the details in the Geekvape Aegis user manual PDF, a range of specific parameters apply to the Geekvape Aegis Legend. One of the most important is the maximum output duration. It can output for 10 seconds at a time, so keep that in mind while you’re vaping. Other key features include the charging voltage and amperage. It needs 5 volts and 1 amp, so make sure to charge …
Usage Instructions
- There is an outline from the Geekvape Aegis user manual that guides you through how to vapeusing it, so we’ll cover the main points here: - To turn it on and off, press the fire button 5 times quickly - To select a mode, give the fire button 3 presses - To switch modes, tap the plus and minus button and the fire button - To set the resistance level...
Buy Geekvape Aegis Products
- Now that we’ve summarized the Geekvape Aegis Legend user manual, we’ll take a look at some of the other Geekvape Aegis products that we think are worth your attention. We’ll give you a brief overview of each one and then a link where you can find out more. That way, you’ll be able to make an informed choice about which one is right for you.
Conclusion
- Now that you’ve seen our summary of the Geekvape Aegis Legend user manual, you should be aware of all the essential information about that product.You should also be familiar with the features, benefits, and drawbacks of the three other Geekvape products we’ve included in this article. Hopefully, this information will help you to make a choice about Geekvape and which of t…