How to replace a vape coil?
May 13, 2018 · First, after unscrewing as much as possible, of course - make sure there's no e-liquid left in the tank. Next, run a tiny screwdriver through the airflow slots and tap around a bit to loosen up the seals. If the tank still isn't budging, then place the whole segment in the freezer to make the seal loosen even more.
Should you know how to disassemble and reassemble your vape?
Step 1: disassemble the vape. To change the coil, you need to access it. For this purpose, you have to disassemble the vape. Usually, the dissemble procedure is mentioned on vape packaging but if not, simply just unscrew the tank or mouthpiece from the battery. To unscrew the bottom cap, you need to turn the tank upside down so be careful of ...
How to unscrew a vape tank?
Jun 28, 2016 · Learn how to easily replace your display board with only a screwdriver! Follow along as our team walks you through the replacement of your display board.
How to get full flavor rips from your vape juice?
Assemble Your Replacement Coil. After preparing the replacement coil, add a few drops of e-liquid. It will prevent the item from exploding the first time it’s powered on, which may force you to acquire a replacement if such happens. Allow this to permeate the device before screwing it into your vaporizer, ensuring a secure but not overly tight seal.
Disassemble and reassemble your vape box mods
Even though vape mods are designed with customizability in mind, cleaning them can still be a chore. From the many already built-in parts to the extra technology you add, the little nooks and crannies of your box mod that you need to take care of add up quickly.
Box mod firing button
One of the most difficult parts of a mod to take apart is the firing button. This button is usually made up of a few parts. There is the button itself, which needs to be taken off and wiped down. Below that, you'll have a spring, which can also be taken off and scrubbed.
The vape battery
Another important part to know how to properly remove and reattach to your vape device is the vape battery. Of course, the vape battery is an absolutely critical component of your device. This is what gives your device the power to be able to heat up e-liquid to turn into vapor.
The vape tank and atomizer
The third and definitely not final part that you should definitely know how to disassemble and reassemble is the vape tank and vape atomizer complex. You may already know how to do this if you change your coils often, but it can never hurt to have a reminder.
How to replace a vape coil?
To replace your vape coil, start by unscrewing the tank from the body of the vape to expose the coil. If there’ s any vape juice still in your tank, dump it out. Next, unscrew the coil from the base of the vape by twisting it counterclockwise.
How to unscrew a vape tank?
Every vape setup is slightly different, but in general, you can easily unscrew the tank from the bottom section. Hold the tank upside down and twist the tank off using your hands. If there is juice in your tank already, you can use a paper towel to avoid getting your hands greasy.
