- Unscrew the coil and place it to one side.
- Now it’s time to fill it with juice. ...
- It’s also a fairly tight squeeze getting your juice in, so take your time and rest the tip of your juice dripper on the glass and slowly pour the eliquid ...
- Depending on the size of you juice dispenser, the tank usually fills after four or five loads.
How do I Clean my aspire vape tank?
If you need a bit of extra cleaning power, you can use a paper towel or flexible pipe cleaner. Blot away excess water with a paper towel and reassemble the tank. You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life.
How do I open and Fill my aspire tank?
To open the tank, gently twist the metal hardware at the top or bottom. Before filling an Aspire tank for the first time – and each time you replace the atomizer coil – wet the exposed cotton portions of the coil with a bit of e-liquid. Doing so primes the coil and helps to ensure that you won’t get a dry hit when vaping. Fill and reassemble tank.
Can you replace my aspire tank?
My Aspire Tank Is Broken! Aspire vaping tanks use durable borosilicate glass. It is possible to break the glass, though, if you drop your device on a hard surface. Many Aspire tanks include replacement glass enclosures, and you can also find Aspire replacement glass in our store.
How do I change the atomizer coil on my aspire tank?
If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in. In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank.
How do you refill a aspire vape?
0:291:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace.
How do you fill an Aspire Nautilus tank?
0:021:27How to Fill Nautilus Mini - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it looks like this flip it upside down unscrew the base sits inside makes it real easy just wantMoreSo it looks like this flip it upside down unscrew the base sits inside makes it real easy just want to take a juice. Put it on the side here. And give it a squeeze.
How do you put liquid in Aspire k2?
0:201:26How to use your Aspire K2 Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simplyMoreSimply unscrew it from its housing and screw a new one in a finger tight. To fill up the tank simply insert the juice bottle done one of the sides. And squeeze.
How do I open my vape tank?
Sometimes the vape tank requires little extra force to unscrew it from the mod. Use either a rubber band or mouse pad to enhance the grip. Only resort to hard (metallic) tools like pliers as a last-case scenario, since they can cause larger breakage to your mod.
How do you fill the Aspire Nautilus 3 tank?
11:4813:40Aspire Zelos 3 kit with Nautilus 3 tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust plug and play push the coil in screw the base. On it will open up your juice flow.MoreJust plug and play push the coil in screw the base. On it will open up your juice flow.
How do you refill Nautilus prime?
Aspire Nautilus Prime Tutorial: Filling the TankTurn the tank on its side and locate the rubber stopper that closes the tank.Pull out the stopper. ... Dispense vape juice into the tank. ... Replace the rubber stopper and press it firmly in place.Snap the tank back into the top of the unit.More items...
How do you fill an Aspire k1 vape tank?
2:204:51Aspire K1 Starter Kit - How To Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou unscrew the base then eliquid needs to be filled to the top of the post to fill hold the tank atMoreYou unscrew the base then eliquid needs to be filled to the top of the post to fill hold the tank at an angle and aim at the side with your bottle or pipette.
How do I refill my Aspire K3 vape tank?
How do you refill the K3 tank? Refilling the tank is an easy task. Simply unscrew the bottom off of the tank, and with the tank now upside down, pour your liquid into the side of the tank, filling the chamber with e-liquid.
How do you fill an Aspire K Lite?
The Aspire K Lite tank has a top fill system so it's clean and easy to fill with your favourite e-liquid. Simply unscrew and remove the top section of the tank then fill via the filling slot and screw the top back on. You can also adjust the airflow through the tank by twisting the bottom section of the tank.
How do I unscrew my Aspire tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do you put liquid in a vape?
2:173:37Beginner Vaper Tutorial: How to Fill a Vape Tank - ecsupplyinc.comYouTubeStart of suggested clipEnd of suggested clipHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like soMoreHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like so once you've filled your tank to their desired.
How do you take the top off a vape?
Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.
How to open Aspire tank?
Consult the instruction manual to find out which type of tank you have. To open the tank, gently twist the metal hardware at the top or bottom.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
How to clean coils on Aspire?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours. Prime the coil with a bit of e-liquid – as if it were a new coil – before using it again.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
How to change coils on Aspire Revvo?
You’ll see the cone-shaped retaining nut that holds the coil in place. Twist off the retaining nut and lift the old coil straight up to remove it from the tank. drop in a new coil, ensuring that the o-ring on the side of the coil lines up with the tank’s glass. Replace the retaining nut and top hardware. Invert your mod – or place it on its side – for a few minutes to wet the cotton on the underside of the new coil.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
Step 2
Turn the tank on its side and locate the rubber stopper that closes the tank.
Step 3
Pull out the stopper. The edge of your fingernail works best but the stopper is pretty easy to dislodge and it shouldn't give you much trouble no matter what method you try.
Step 4
Dispense vape juice into the tank. The filling port is relatively small but you should be able to fill the tank using either a glass dropper, a needle nose plastic bottle or an e-juice syringe.
Step 6
Snap the tank back into the top of the unit. The tank is shaped so that it's obvious what orientation it needs to be in order to fit in place. Make sure the tank clicks into place and that it is flush with the top of the unit.
What size tank is the Aspire Revvo?
The 24mm tank comes in two sizes, the TPD compliant 2ml version and of course, the standard 3.6ml version. It has an adjustable top airflow construction and a special spring-loaded filling tube. Whichever you choose (or are forced to choose if you’re in a TPD compliant area), you’ll be amazed by the innovation that Aspire has put into this fantastic new design.
What is the Aspire K lite tank?
Introducing the Aspire K Lite Tank! The redesigned K Lite Tank features easy twist off top fill, bottom adjustable airflow, and compatibility with all the Aspire BVC Coils! Any K-series fan will be delighted with this tank! Wether you like Nic-Salt, CBD, or DIY mixes, the K Lite tank is an exceptional choice!
What is a Revvo mini tank?
The Aspire Revvo Mini Tank is a more compact version of the original Revvo tank, lower profile and slimmer. The ARC (Aspire Radical Coil) sits horizontally in the tank similar to a stove-top design. The design of it is an increased surface area of the coil for great flavor and vapor production. The tank can withstand a power output of 55-65W. To get the full benefit of the ARC Coil, the Revvo Mini has a fully adjustable top airflow with 3 airflow slots. It also fills in the center of the tank, accessible directly through the mouthpiece, sits a spring-loaded filling tube.
What coils are in the Aspire Nepho?
Aspire Nepho Tank. The Nepho comes fitted with Aspire’s new Kanthal mesh coil rated at 0.15 ohms, also included is a new Kanthal wire, 0.5-ohm coil, both are ‘press fit’ for ease of replacement. Both coils have phenomenal wicking capability, which ensures increased vapor and flavor, just as you’d expect from Aspire innovations. With the improved flavor and vapor production, you can form your own mini weather system each time you vape!
How to fill a Nautilus 2S tank?
The Nautilus 2S is a 2ml capacity tank, designed to be filled from the top. It comes with two coils: a 0.4ohm BVC coil and a 1.8ohm coil. The 0.4ohm coil is designed for more vapor production. While the 1.8ohm is designed for a smoother hit. Unscrew the top cap anti-clockwise a few turns, place your thumb on the top cap above the indicator spot and push away from you, this will reveal the filling slot. The longer drip is to provide more of a mouth to lung hit, while the shorter one is designed for straight to the lung hit.
What is the Nautilus mini tank?
The Nautilus Mini is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus Mini uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. This new technology is designed to last longer while still giving users the purest and cleanest taste from e-liquids.
How many ml is an Odan mini tank?
The Odan Mini combines all our latest tank innovations into a more convenient size than it’s big brother! Boasting a 5.5ml standard glass capacity & 4ml with Diamond glass.
How to fill a breeze tank?
Fill the Breeze from the top, pull off the drip tip section, unscrew and remove the cartridge, you can add your preferred e-juice into the tank. Be aware of the max fill line when filling the breeze.
Where to thread coil head?
Thread the coil head to the bottom of the chimney, then fill the tank with juice until it reaches the fill mark line.
How to use a vaporizer with a 5 head?
The wire in those .5 heads is very thick. It takes a bit for the coil to heat up sometimes, especially if the battery is running low. Press the fire a button for a second or two before breathing in and you’ll notices the vapor will be a lot warmer. I found that the best technique for me is pressing the fire button for a sec, take a couple of quick puffs, re-fire the button and then take a lung hit. When I figured this out, it made a world of difference.
How much juice does the Aspire Atlantis hold?
Now it’s time to fill it with juice. The Aspire Atlantis holds 5ml, but it fills up quickly, so be careful.
How many loads does a juice tank take?
Depending on the size of you juice dispenser, the tank usually fills after four or five loads.
Is Aspire a sub ohm vape?
It is also one of the best looking sub-ohm vape tanks around. Period. And – because it’s Aspire – you know you’re supporting American workers, as Aspire is based in the States. Double bonus!
Can you run a senseblazer 200 as an RBA?
You can also run the Sense Blazer 200 as an RBA (though that bit comes separately).
Does Aspire Atlantis V2 have manuals?
As noted in our Aspire Atlantis V2 Review, you get pretty much sweet FA with respect to instructions inside the Aspire Atlantis box. It’s just the tank, some coils and that’s about it – no user guides, no manuals and no safety information. This is rather perplexing for a number of reasons, but mostly because it assumes the buyer is a seasoned player, whereas a lot of people using it will not be.
Aspire Athos Tank
Introducing the Aspire Athos tank from aspire, the Athos tank is a new heavy hitter for those who prefer both dense clouds and top-notch flavor. It employs a convenient top-fill, bottom adjustable airflow, as well as the innovative penta-coil head and a tri-coil head to provide you with ultimate flavor and tremendous vapor production.
Aspire Athos Coils
The all new innovative Athos coil heads, made for flavor, made for power. These new coil heads will satisfy even the most discerning cloud or flavor chaser. Our Tri-coil head (left) is rated at 0.3Q and the recommended power setting is 60-75 watts.
Aspire Athos Airflow
To help you truly experience the vapor and flavor that the new Athos tank can produce, we designed the perfect smooth adjustable airflow to compliment our innovative coil heads. It’s smooth, it’s satisfying, its awesome!
Aspire Athos Filling
Refilling. We designed the Athos tank with ease of use in mind, and it couldn’t be easier than filling this tank from the top. Just unscrew the top cap, fill with your preferred e-liquid through the easily accessible ‘fill slots’, replace the cap and you’re good to go.
How to fill up a vape tank?
With the tank open and empty, insert a pipette of your favourite e-liquid and start slowly inserting the vape juice. Make sure you don’t fill up your tank above the fill-line; we don’t want to overdo it!
How to take a vaporizer apart?
The first step is to take your vaporizer apart precisely, while remembering what goes where for later. Unscrew the mouthpiece and the airflow base at the bottom of your device to reveal the coil.
