Step 1: Open the Tank
- Open the Refill Hatch. If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open now.
- Unscrew the Top. If there is no access hatch, your vape may be designed to fill with the top removed. ...
- Remove the Bottom. If your vape is a bottom fill rig, then you will need to flip the entire tank head upside down. ...
How do I Fill my Kanger aerotank?
Turn the Kanger Aerotank upside down and unscrew the base assembly cap from the bottom of the tank. Fill with approximately 2.0ml-2.4ml of e-liquid by tilting the Kanger Aerotank at a slight angle and dripping juice down the inside wall against the outer wall of tank.
How to fill a vape tank?
The first step is to get your tank open and prepare to fill it. If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open now. Use force if there is a button, but do not wrench it too far open. Usually, these swivel a certain distance, then stop.
How to refill your vape device safely?
Precautionary Step: Remove the Tank from the Battery. As a note on safety, always remember to remove the tank from the batter before doing anything else with the device. The first thing you should do is investigate the vaping device to find out more about it. Any vape is easier to refill when you know how it opens and how it is meant to be loaded.
How do you fill a vape pen with no hatch?
If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening. If your vape is a bottom fill rig, then you will need to flip the entire tank head upside down.
How to take a vaporizer apart?
The first step is to take your vaporizer apart precisely, while remembering what goes where for later. Unscrew the mouthpiece and the airflow base at the bottom of your device to reveal the coil.
How long should I let my e-liquid settle?
Step 5: Let your e-liquid settle. When everything’s back in place, it’s always best to allow your e-liquid to ‘steep’ inside your tank for 5 minutes. Your coil will then be primed to deliver a supreme vaping experience with optimum flavour.
How to know if a vape is easier to refill?
Any vape is easier to refill when you know how it opens and how it is meant to be loaded. Take a close look at the tank and examine the pieces.
How to fill a vape with no access hatch?
If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening.
What is the oval opening on a unicorn vape?
The oval opening in top fill vapes is designed to direct your unicorn tip to the correct place. But even without it, all you have to do is try to get the liquid to flow down the side of the glass. Be careful not to over-fill your vape. Many tanks have fill lines. If yours doesn't, stop before the tank is 3/4 full.
How to tell if a tank is top or bottom filler?
Often, you can tell a top filler because between the drip-tip and the tank will be a plastic ring layer with an oval opening, that oval is where the tank would like you to fill it. Bottom fill tanks are becoming more common and will need to be flipped upside down to load.
Can you use an old wick for a new flavor?
Do not use an old wick for a new flavor. If you want multiple flavors, consider keeping a wick assigned to each one. When you switch flavors or throw out a tank of old liquid, always switch out the coil/wick as well. This ensures you're always vaping with a coil soaked only in your current flavor.
Do you need to dump out e-liquid?
If the remainder is fresh and you want to mix flavors, however, the dump-out is not necessary.
Do you have to be a first time vaper to use a vape tank?
April 19, 2019. You don't have to be a first-time vaper to be completely stumped by a vape tank. To be frank, vape tanks come in all shapes, sizes, and designs. Some open from the top, some open from the bottom, and some are weirdly unique to their model.
What Is The Aerotank Turbo?
The Aerotank Turbo is one of the latest upgrades to Kanger’s Aerotank atomizers. The Aerotank Turbo’s biggest and most noticeable change is the huge 6.0 ml capacity, which adds a lot of girth to the atomizer.
How To Use The Aerotank Turbo
Turn the Connection Ring clockwise until the eLiquid Tank detaches from the base. Flip over the eLiquid Tank and you’ll see two empty tube (these lead to the mouthpiece, and will be filled by the Coil Units).
Why does my Aerotank leak?
A small amount of liquid can leak from the mouthpiece when you're changing the coil (wicks) or adding liquid, since the seal is temporarily broken when the base is removed.
How to change coil on a spherical cylinder?
HOW TO CHANGE THE COIL: 1 Turn the tank upside down and unscrew the base assembly cap from the bottom of the tank. 2 Thread on a new coil ( do not over tighten the coil into the base, a snug fit is all you need) 3 Reinstall the base assembly into the tank.
Where are the wicks on a clearomizer?
Another great thing they've revamped is the coil heads. The wicks are now located inside the atomizer. This is a new feature that helps to prevent leaking.
Does the Kanger Aerotank V2 come with Pyrex?
Kanger Aerotank V2 Dual Coil. The Aerotank boasts a sturdy Pyrex glass tank and the V2 is no exception. Not only does the new V2 come with the aforementioned Pyrex glass tank, it also comes with a stainless steel tank.
