how to refill a smok rolo vape

Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil.

Full Answer

How do I charge my Smok Rolo?

Step #1: Remove your SMOK Rolo Badge from its box. Then, remove the charging cable, injection bottle and two pod cartridges. Keep the user manual in the box and store it away in a safe place. Step #2:Plug the charging cable into an outlet and charge your device until it reaches a full charge.

How do I switch flavors on the smok Rolo badge?

Because the SMOK Rolo Badge comes with two pod cartridges, you can switch between flavors throughout the day with incredible ease. Simply fill each pod cartridge with a different salt nic e-liquid flavor.

How do I store my Smok Rolo badge?

Step #1: Remove your SMOK Rolo Badge from its box. Then, remove the charging cable, injection bottle and two pod cartridges. Keep the user manual in the box and store it away in a safe place.

Is the smok Rolo badge the best pod mod?

Among the most coveted pod mods on the market is the SMOK Rolo Badge. This shield-shaped pod mod is pocket-friendly, easy to use and incredibly satisfying. The SMOK Rolo Badge is known for being extremely user-friendly. Still, if you've never used a pod mod before, you're probably going to need some guidance.

How do you use a Smok Rolo vape?

SMOK Rolo Badge Kit Quick Start GuideMake sure device is charged.Open rubber bung/s on pod to fill with e-liquid.Slide into the battery.Wait 10 minutes for the e-liquid to soak into the coils.Inhale to vape.

How do I know when my Smok Rolo badge is fully charged?

Setting up the Smok Rolo Badge is as simple as charging up the mod via the included micro USB cable. The LED indicator light should turn off when the mod is fully charged.

How long does it take a Smok Rolo badge to charge?

Charging the Battery and Charging Time The USB port is located on the side of the Smok Badge, and it takes one hour more or less to charge. The LED light will turn off when it is fully charged.

How much is a Smok Rolo badge?

SMOK ROLO BADGE Replacement Cartridges - 3 PK - $5.49 - EJuice Connect.

What does it mean if my Smok is flashing white?

Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output.

How long does it take a Smok to charge?

Since the pod battery supports pass-through charging, you won't be stuck waiting to vape as it charges. And it only takes 25 minutes to be fully charged from a depleted state. In my opinion, the Smok infinix is a wise choice for beginners who want to quit smoking.

How much is Smok Novo?

$24.99How Much Is A SMOK Novo? The SMOK Novo X Starter Kit will cost you $24.99. It includes the device, pods, charging cable, and user manual. It has everything you need to start vaping and the option to switch between different pods, which all depends on your preference.

How to fill a vaporizer with e-liquid?

Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.

How to put e-liquid in a vaporizer?

Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.

How to make a liquid e-liquid?

2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.

How to change flavor in a vaporizer?

1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...

How to change flavor of e-liquid?

If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.

How to take a vaporizer apart?

Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.

Is vaping a stress reliever?

Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.

What is a smok loo badge?

The SMOK ROLO Badge Ultra Portable System delivers a visually striking shield-like design element featuring 250mAh integrated battery and 2mL maximum capacity for your favorite nicotine salts. The ROLO Badge features an all-in-one design, equipped with draw-activated firing mechanism and an integrated 250mAh rechargeable battery capacity with intuitive LED light indicator. The replaceable cartridge features a robust and sleek fillable pod element with a capacity of up to 2mL juice capacity, cleverly designed with simple side refill method on the side enclosed by a rubber plug. The atomizer core is integrated into the pod, utilizing a special cotton that is enclosed to provide optimal vapor production and flavor enhancement. An innovative addition to the market, the SMOK ROLO Badge is set to enter the industry with spectacular fashion.

Can LiPo explode?

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled.

What is a SMOK ROLO badge?

The SMOK ROLO Badge Replacement Pod Cartridges features a discreet pod element with 2mL juice capacity, cleverly designed with simple refill method to accommodate a wide range flavorful nic salt e-juice. The horizontal atomizer core is integrated into the pod, utilizing a special cotton that is enclosed to provide optimal vapor production and flavor enhancement. Comes in a pack of 3.

How many packs of SMOK ROLO pods?

Comes in a pack of 3.

Can LiPo explode?

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled.

Filling a top-fill tank

The first step to filling a top-fill tank is to disassemble the tank by unscrewing the airflow base at the bottom of the vaporizer. Once it’s removed, pull the coil out from inside but leave the tank, top connector, and mouthpiece attached.

Filling a bottom-fill tank

Like the top-fill method, the first step to filling a vape tank is to remove it from the body of your mod, then unscrew the body of the coil from the top of the tank. Prepare your coil by dropping some e-liquid into it as mentioned above, then put the coil back into the tank.