how to put your vape back together

To begin, start by dissembling your tank. When you do this, keep a mental note of how you took it apart so that you can put it back together correctly. Next, place each part into a bowl of hot water for 20 to 30 minutes. After it has been in the water, you want to rinse each piece and place them on a paper towel to dry.

Full Answer

How to set up a vape?

 · For all other top fill vapes, simply screw the top piece back on and tighten it carefully to ensure no drips in the future. Replace the Bottom and Coil And if you have a bottom fill, reattach the bottom. Put the coil back in, tighten everything, and flip the entire tank back right side up. Step 6: Vape!

Should you know how to disassemble and reassemble your vape?

 · Replace the coil and attach your atomiser back to the tank. Next, unscrew the top of the tank to add your e-liquid. Most e-liquids come with a dropper to make adding e-liquids quick and simple. Continue filling until you have reached the tank’s fill line. Reassemble your tank and screw all the pieces back together tightly.

How to vape like a pro?

Does your vape tank fill from the top or bottom?

How do you assemble a vape tank?

1:176:43How to Set-up,Prime, and Troubleshoot a Vape Tank ...YouTubeStart of suggested clipEnd of suggested clipOn most tanks some have horizontal. But for these vertical guys. Just go ahead and paint some liquidMoreOn most tanks some have horizontal. But for these vertical guys. Just go ahead and paint some liquid all in there remember not get too much you don't want to flutter out.

How do I fix my vape coil?

It's quick and easy to do:Take your new coil and apply 3-4 drops of your e-liquid directly to the wick.Set aside and wait for roughly 10 minutes.Screw the coil on to your device.Fill your tank with your chosen e-liquid and screw it on to your vape.More items...

How do you fix a vape that won't smoke?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.

How do I fix my vape spit back?

Flick the tank. ... Remove excess liquid from your tank's centre post. ... Fire your battery before inhaling. ... Reduce your airflow, or take smaller inhales. ... Turn up the power. ... Don't over-prime your coil. ... Use an E Liquid With More VG. ... Cover your mouthpiece.

Can a burnt vape hurt you?

Depending on how bad the coil is burnt, you could end up choking or vomiting immediately. Depending on what kind of coil you are using they can produce some particles that stick to the vapor and end up ingested by the user when they are burned dry. Some have an allergy to these particles being created.

Can a coil burn in one day?

It could be potentially a dry-hit, and your coil isn't in fact burnt. Next time you notice it, try setting your vape down for a few minutes and seeing if it recovers. It's entirely possible and plausible that your coils aren't wicking swiftly enough to keep up with the rate you're vaping.

What do I do if my cart wont hit?

The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.

How long does it take for your lungs to heal from vaping?

After two weeks: your circulation and lung function begin to improve. After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.

Why is there no smoke coming out of my cart?

Check if the holes are open. If they appear clogged with residue, gently clean them with a needle or similar object. Check whether the holes are being obstructed by any other components of the vape pen (usually by the cart itself). Try to assemble your vape in such a way that the airflow holes aren't blocked.

Is it normal to taste vape juice on your lips?

this will likely have been caused by e liquid leaking from the e cig cartridge or chamber. This seeps through the mouthpiece into your mouth and is anything but pleasant. The experience will leave a bitter taste in your mouth and it may sting a little.

What happens if you swallow vape juice?

Nicotine is a poison. If swallowed it can cause serious illness and, in some cases, death. Children and pets are at high risk of harm due to poisoning caused by swallowing an e-liquid. Electronic cigarette components and e-liquid capsules are also a choking hazard for young children.

Should my vape be crackling?

The crackling and popping you hear from your e-cig is completely normal. It is caused by your vape coil.

How to take a vaporizer apart?

Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.

How to put e-liquid in a vaporizer?

Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.

How to fill a vaporizer with e-liquid?

Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.

How to remove coil from vaporizer?

Remove the coil from the bottom. Unscrew the bottom metal piece of the vaporizer and set it aside. Then, slide the coil out from inside of the tank.

How to fill a e-liquid tank?

Fill the tank to the indicated line with e-liquid. Unscrew the top connecter from the tank to reveal the access points for the e-liquid. Then, hold the dropper part of your e-liquid bottle up against the inside of the tank. Squirt in e-liquid until it reaches the horizontal hash mark on the side of the tank, which indicates fullness.

How to make a liquid e-liquid?

2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.

How to change flavor in a vaporizer?

1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...

How to try a vape out for the first time?

To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.

When to charge vape?

For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.

How many watts does a Zelos vape have?

For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.

What are the different types of vapes?

There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.

What happens if you set your coil incorrectly?

If set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier. To know what settings you need for your device you can find this information in a few places; in the manual or on the packaging, on the coil itself or coil packaging, or online from the manufactures/retailer where you purchased your device from.

How long should I let my pod sit before using it?

This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.

Where do you fill a pod?

First off you will need to locate the filling cavity on your pod. Most pods are either filled from the top or from the side, but this will be clearly indicated on the packaging or in the manual.

How to know if a vape is easier to refill?

Any vape is easier to refill when you know how it opens and how it is meant to be loaded. Take a close look at the tank and examine the pieces.

How to stop vape drips?

If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open now. Use force if there is a button, but do not wrench it too far open. Usually, these swivel a certain distance, then stop.

How to fill a vape with no access hatch?

If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening.

How to open drip tip on vape?

If your vape tank is a top filler, the drip tip piece may be built to swivel open with the flick of a thumb or opening of a latch. this can make it quick and easy to refill on the go once you know what you're doing. Take a quick look to find out if this exists on your vape model. The oval opening should be right below if you succeed.

What is the oval opening on a unicorn vape?

The oval opening in top fill vapes is designed to direct your unicorn tip to the correct place. But even without it, all you have to do is try to get the liquid to flow down the side of the glass. Be careful not to over-fill your vape. Many tanks have fill lines. If yours doesn't, stop before the tank is 3/4 full.

Can you vape with a freshly filled tank?

Now you are free to vape your freshly filled tank. For more great vape tips from the Velvet Crowd crew, contact us today or just keep reading the blog!

Can you use an old wick for a new flavor?

Do not use an old wick for a new flavor. If you want multiple flavors, consider keeping a wick assigned to each one. When you switch flavors or throw out a tank of old liquid, always switch out the coil/wick as well. This ensures you're always vaping with a coil soaked only in your current flavor.

How to disassemble a vape tank?

In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads. After you’ve unscrewed the tank, you’ll have two halves: the bottom hardware with the atomizer coil attached and ...

How to remove glass from a vape?

To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.

Why is my vape tank stubborn?

In some cases, a vape tank can simply be stubborn because the machining of the threads isn’t so good. That could be a sign that you’ve gotten a counterfeit tank, but it’s more likely just a case of subpar workmanship. Some vape manufacturers are better than others.

Why is my vape tank not moving?

One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.

How to remove stuck glass from a tank?

Just get a length of dental floss and place it in the seam between the glass and the tank’s hardware. Hold the floss tight while wrapping it around the tank repeatedly.

How to clean a septic tank?

Use soap water and clean the tank thoroughly, but carefully. If you have used a thick, dense e-juice in it, you should also clean it with slightly warm water after.

Can you discard juice every time you want to try a new flavor?

By doing this, you also won’t have to discard left-over juice every time you want to try a different flavor. You can also always come back to the previous flavor easily by simply replacing the tank.

Can you change vape juice multiple times?

If you are a passionate vaper who likes switching flavors frequently, I strongly recommend that you keep multiple tanks filled with your favorite e-liquids so you don’t have to change the vape juice multiple times.

Do vape juices expire?

Just keep an eye out for the expiry date of those e-juices when you are trying out multiple flavors. Remember that vape juices expire, so better check if the e-juice you stored is still good before vaping it.

Do you need to clean your vape coils?

While you are waiting for your tank to dry, you will need to clean your vape coil .

Is it hard to change vape juice?

The process of changing your vape juice is not difficult but it needs all your attention. Once you do it a couple of times, you will soon become a pro at it.

Can you disassemble a vape tank multiple times?

While doing so could get tedious, it is also not healthy for your tank which may end up cracking due to being disassembled multiple times. Even the lifespan of the tank will be affected—which can easily be avoided by just maintaining multiple tanks and switching your tank with the other one which you want to vape.

Changing Flavors Without Replacing the Coil

If you plan on trying new flavors frequently, you likely don’t want to spend the money to replace each coil. Instead, all you need to do is clean it. But to start, you need to disassemble and wash your tank.

Different Ways to Clean Your Coil Head

When switching vape flavors, most beginners believe they have to replace the coil each time, but this is false. We will admit that replacing it is always ideal, but if you are limited on resources, cleaning it will extend its life while also giving you the option to switch out the juice.

The Short-Cut: Replace the Coil

The process of changing vape juice can be extremely frustrating, especially if you have to stop what you are doing to clean it. But don’t worry, we have another solution for you.

The Empty and Refill

We understand that sometimes you don’t want to put forth the effort of taking apart your vape just to try a new juice. If this sounds like you, you can always just refill your tank and vape away. While there will be a mix of flavors, the old taste will dissipate over time unless you are using menthol or tobacco e-juice.

Final Thoughts

Never again will you be limited to one flavor because you don’t have an extra coil. With proper planning and procedures, you will get the most out of your vaporizer without having to spend a single cent. Just remember, if you do plan to clean it, rinse each piece thoroughly and give it adequate time to dry.