Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. 3 Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How do I use the voopoo drag s?
The VooPoo Drag S kit's ergonomic design, perfectly matches the curvature of your hands, giving you maximum comfort while you vape. Press the fire button 5 times rapidly to power the Drag S On or Off.
What are voopoo vape mods?
VOOPOO is one of the largest Vape Mod manufacturers in the entire world! They are known to make some of the best technology in the vaping scene and anyone who is looking for high quality hardware will always recommend VOOPOO. VOOPOO was established in 2014 and was originally in the medical field as well as industrial!
How to check battery level of voopoo drag nano device?
How To Check Battery Level: The VOOPOO DRAG Nano device features a smart LED tricolor indicator light, which will glow when in use. The light will glow green when the battery has 60% or higher charge, Blue when the battery has between 20%-60% charge, and Red when the battery has 20% or less charge.
What happened to voopoo?
Within that same year, it became the sole strategic partner of the GENE chip, and eventually developed the GENE.Fan and now GENE.Pod chip through its partnership. At the time of writing this article, VOOPOO now has more than 500 employees, which includes over 100 research and development personnel, and serves many countries.
How do you put juice in a drag VooPoo?
HOW DO I FILL THE VOOPOO DRAG S WITH E-LIQUID? Remove the pod from the mod, turn the pod upside down and lift the black silica gel plug. Pour the vape juice into the now open hole, until full and reinsert the plug.
How do you load a VooPoo vape?
0:414:28FV Vape Show - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere we go pop the fill port cap back over the little rubber stopper push that back in put the baseMoreThere we go pop the fill port cap back over the little rubber stopper push that back in put the base of the tank. Back on and leave to soak for around 10 to 15. Minutes while that's soaking.
How do you put vape juice in a VooPoo drag 3?
1:3714:03Voopoo Drag 3 Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou pop this off like that and the way you fill it is this grommet. Oh i can't tell you how much i'mMoreYou pop this off like that and the way you fill it is this grommet. Oh i can't tell you how much i'm starting to hate grommets in terms of how messy. They are so you take that grommet.
How do you refill a VooPoo drag Max?
2:233:32VOOPOO DRAG MAX Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipDesign. Then take some of your favorite e-liquid and begin filling by lifting the rubber sealMoreDesign. Then take some of your favorite e-liquid and begin filling by lifting the rubber seal located at the bottom of the tank. Once filled let the e-liquid soak into your coil for five. Minutes.
How do you use Voopoo drag?
Press up and down buttons simultaneously for 1.5 seconds, enter the function menu Interface. Press up button or down button simultaneously to choose the function. Press the fire button to make confirmation and go to next step. You can make the adjustment according to pressing up or down button simultaneously.
How do you fill a drag s pro tank?
Voopoo Drag X/S Pro – How To Fill the TPP-X Pod-TankPush in the open button at the top of the tank.Slide the ring clock-wise until it reveals the rubber bung.Lift the rubber tab.Fill with your desired e-liquid and allow to soak for 5 minutes.Re-fit the rubber tab and install into the device.
How do you fill drag S?
1:423:43Voopoo Drag S Pro Pod Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipDesign to fill press the button at the top of the tank. And slide to the left to expose your fill.MoreDesign to fill press the button at the top of the tank. And slide to the left to expose your fill. Seal open your fill seal from the right once open insert an e-liquid bottle and begin.Voopoo Drag S Pro Pod Kit Guide - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fill drag S?
How do you fill a VooPoo gene?
2:465:38VooPoo Drag Nano Pod System Starter Kit - Review & TutorialYouTubeStart of suggested clipEnd of suggested clipPut it to the hole. And fill it up. Now. Once you fill it up just put the cap back on insert. ItMorePut it to the hole. And fill it up. Now. Once you fill it up just put the cap back on insert. It into the drag nano. You'll hear it click when it's all the way down.VooPoo Drag Nano Pod System Starter Kit - Review & Tutorialhttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you fill a VooPoo gene?
How do you set up VooPoo drag 2?
0:272:59VooPoo Drag 2 Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd coil resistance to adjust the power simply press the plus or minus buttons at the bottom of theMoreAnd coil resistance to adjust the power simply press the plus or minus buttons at the bottom of the device to increase or decrease the wattage depending on your quote.VooPoo Drag 2 Guide - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you set up VooPoo drag 2?
How to power drag S?
Press the fire button 5 times rapidly to power the Drag S On or Off. Charge level, Wattage and Puff Count will all be displayed on the easy to read LED screen.
What is a drag s?
The Drag S is the brand new, state of the art pod vape kit from the esteemed Voopoo. The VooPoo Drag S kit's ergonomic design, perfectly matches the curvature of your hands, giving you maximum comfort while you vape.
How to change coils on a mod?
Pull the pod off from the top of the mod and turn the pod upside down. Pull the coil out from the bottom of the pod, insert the new coil into the bottom of the pod and press firmly.
How many employees does Voopoo have?
Within that same year, it became the sole strategic partner of the GENE chip, and eventually developed the GENE.Fan and now GENE.Pod chip through its partnership. At the time of writing this article, VOOPOO now has more than 500 employees, which includes over 100 research and development personnel, and serves many countries.
How to charge a drag nano?
To charge this battery, attach the provided USB cable to a power outlet and the micro-USB end into the micro-USB port positioned at the bottom of the DRAG Nano device. The device will receive a full charge within just one hour, and once charged completely, you’ll enjoy up to 350 puffs on a single charge.
How to remove a drag nano pod?
How To Remove The DRAG Nano Pod: To remove the VOOPOO DRAG Nano Pod, simply pull up on the mouthpiece and the pod will slide out from inside the device.
What is included in the Drag Nano Kit?
However, to share with you what’s included in the DRAG Nano Kit, you’ll receive a DRAG Nano device, a 1.8-ohm Nano Pod, Chain Necklace, USB Cable, User Manual, Warranty Card, and GENE Chip Card.
What color is the battery light on a drag nano?
The light will glow green when the battery has 60% or higher charge, Blue when the battery has between 20%-60% charge, and Red when the battery has 20% or less charge. While vaping, if the battery has a low charge and the light flashes red 10 times, the device will automatically turn off. How To Recharge The DRAG Nano Battery: The DRAG Nano comes ...
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to remove coil from vaporizer?
Remove the coil from the bottom. Unscrew the bottom metal piece of the vaporizer and set it aside. Then, slide the coil out from inside of the tank.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to fill a e-liquid tank?
Fill the tank to the indicated line with e-liquid. Unscrew the top connecter from the tank to reveal the access points for the e-liquid. Then, hold the dropper part of your e-liquid bottle up against the inside of the tank. Squirt in e-liquid until it reaches the horizontal hash mark on the side of the tank, which indicates fullness.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
What is safe for TC vape coils?
For example nickel, titanium, or stainless steel are safe for TC.
What is super mode on a drag?
Super mode is one of the DRAG’s most exciting features. It activates automatically when you hit 130 watts and smooths out your hit, allowing you to inhale bigger clouds without risking an embarrassing cough.
How many watts does a mod have?
The mod yields a maximum of 157 watts of power from two vape batteries. The battery compartment is covered by a large pull-away side panel – and protected by four strong magnets that keep the panel from falling off and getting lost.
What is the shape of a drag?
The shape of the DRAG makes it easier to hold, with two shaved corners placed perfectly for both left and right-handed vapers. With overcharge protection, over-discharge protection, short-circuit protection and more in-built safety features, you can relax with the DRAG in your pocket or in the hands of a loved one.
Do you need to read vape starter instructions?
Vape starter kits can require a significant amount of technical knowledge to function correctly and safely. At vaping.com we recommend you make sure you read all the instructions before firing up your device for the first time.
What is voopoo drag?
The Voopoo Drag brand now encompasses a series of mods in all sizes ranging from a tiny pod system to a powerful dual-battery box mod. Voopoo has become one of the most famous brands in the vaping community, and that fame comes largely from the company's advances in the field of research and development. In the past, there wasn't ...
How many watts does a voopoo drag mini use?
The Voopoo Drag Mini features the same great technology -- and the same GENE.FIT chip -- as the Voopoo Drag 2. While the Drag 2 uses two removable batteries, though, the Drag Mini is slightly smaller and lighter and has a built-in 4,400 mAh battery. Also, while the Voopoo Drag 2 has a top power of 177 watts, the Voopoo Drag Mini reaches a maximum of 117 watts. While the higher wattage of the Voopoo Drag 2 probably makes it the better choice if you're an RDA user, the Voopoo Drag Mini is perfect for almost any sub-ohm tank. That's especially true if you like mesh coils, since virtually every mesh coil on the market operates at well under 117 watts.
Who Is Voopoo?
Founded in 2014 and based in China, Voopoo began its life as a supplier of integrated circuits for other companies in the vaping industry. In other words, Voopoo supplied the computer chips that made other companies' vaping devices work. In 2017, though, the company had a major breakthrough when it developed the GENE.FAN chip and packaged it in a mod bearing the Voopoo brand name. Using the GENE.FAN chip, the Voopoo Drag could activate a vape coil in just 0.025 of a second. No one had ever seen such a fast firing speed before, and the GENE.FAN chip made the Voopoo Drag an instant hit. Voopoo continues to put new generations of the GENE chip into its devices, and each version of the chip has some revolutionary new feature that only increases Voopoo's fame in the vaping community.
What is the voopoo gene chip?
It is a state of the art technology chipset that allows multiple customizable functions. By the end of 2017, VOOPOO was known to be the king of the Vape Mod industry.
How many people does Voopoo have?
Nowadays, VOOPOO employees over 500 people and spans across North America to Asia. As stated before, VOOPOO leads the industry when it comes to both technology and technique. The company sets the record with the world’s fastest ignition speed, and has the power compensation mode making Vape Mods more safe.
What is the second generation of Voopoo Drag 2?
Voopoo Drag 2. The Voopoo Drag 2 features the second-generation GENE.FIT chip. To improve on the original GENE.FAN, Voopoo spent 15 months in research and development and mined the data from 11 million GENE.FAN chips.
When was Voopoo established?
VOOPOO was established in 2014 and was originally in the medical field as well as industrial! In 2017 VOOPOO acquired the U.S Brand, WOODYVAPES, to officially enter the e-cigarette industry and this was a very pivotal moment in the vaping community.
really hard to decide
between these pod mods which one the best for the long run and leaks the least and convenient all in all
Gene just took a shit
Was using a Caliburn until it took a shit on me. Went to a vape shop and they were like “ooh try this one it’s like what you like!” Got the voopoo gene. Cool. Meets my needs. Battery is okay and juice volume is good. I get two so I can always have one charging.
Having trouble
Can anyone tell me how to refill this? It's my first vape and I can't figure it out
Fire button stuck on Argus GT
This is about my 5th month of having my Argus GT and my fire button is just stuck in place. Any fixes for this?
Vinci Pod Royal Edition
Everything about VOOPOO. We share the latest product, contests. We want to hear your feedback,too.