If you open the chamber of your vape pen, you should see an open space for concentrate, as well as the atomizer coils. Using a dabbing tool, scrap a small amount of the shatter on to the end of the dabber, and scrap it off into the chamber. Never touch the concentrate with your fingers, because it can damage the delicate structure of the cannabis.
How to use a vape pen to DAB?
If you open the chamber of your vape pen, you should see an open space for concentrate, as well as the atomizer coils. Using a dabbing tool, scrap a small amount of the shatter on to the end of the dabber, and scrap it off into the chamber.
How to use a dabbing tool?
Using a dabbing tool, scrap a small amount of the shatter on to the end of the dabber, and scrap it off into the chamber. Never touch the concentrate with your fingers, because it can damage the delicate structure of the cannabis.
Is dabbing the best way to get a strong high?
It’s no secret that today’s smokers love concentrates, including budders, oils and shatters. These powerful substances deliver an equally powerful high. One that's much stronger than any all-natural flower could deliver. But most of the more conventional methods of smoking concentrations, mainly dabbing, come with a few downsides.
Can You DAB with butane concentrates?
NO DOCTOR is going to recommend “dabbing” with BHOs at least since that’s what they’re talking about specifically and there isn’t research out there yet on long term use of dabbing butane processed concentrates.
How do you smoke wax in a vape?
Start by placing a small dab of wax onto the tray or dish. Now use a blowtorch to heat the nail of your nectar collector to the desired temperature. When it's hot, put your lips to the mouthpiece, begin to inhale, and drag the hot nail across the wax. As soon as the nail touches the wax, it will instantly vaporize.
How do you load shatter into a vape?
Step 1: put a gram of shatter into a shot glass.Step 2: apply 1ml of Wax Liquidizer to the shatter in the shot glass.Step 3: put it in a microwave for about 10 minutes.Step 4: stir the mixture efficiently to remove the undissolved pieces.Step 5: make use of the syringe to extract the infused vape liquid.
Can you put dab wax in a pen?
Dabbing and using a portable dab pen is more effective and convenient than using a bong or joints. It's not going to replace smoking cannabis for most people, but dabbing works better for a lot of people in many ways.
How do you add dabs to vape juice?
Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.
Do you put wax directly on coil?
You can add it onto the coil. The coil at this point should be wet and waxy so it will only give you a bigger hit. We recommend you do not use a variable voltage battery on your wax chambers since they can burn it out. If you only have a variable voltage battery, put it to the lowest voltage, which is usually 3.2V.
Can you put concentrate in a vape?
How Do You Use It? The device itself is quite simple. The patient simply loads a small amount of concentrate into the unit, presses a button to heat the material and inhales vapor through the mouthpiece.
Can you put your own wax in a cart?
You can either use your old top-loading cartridges or purchase some empty 510-thread cartridges from your local vape shop. After mixing vigorously with the blunt tip of the syringe or your stirring tool, suck up all of the cannabis distillate and proceed to fill up your dab cartridges.
Are dab and vape pens the same?
The substances used in vaping and dabbing are generally different. A vape pen uses cannabis flower or oil, whereas a dab pen typically uses wax or shatter. Wax is a thicker substance, so a dab rig requires a higher operating temperature to convert it to an inhalable medium.
Can I mix shatter with vape juice?
Shatter can be vaporized or dabbed using a vape pen or a dab rig. To vape, make sure that your vape pen is specially made for marijuana extracts such as shatter or wax.
How to make a vape concentrate?
In a shot glass,put your concentrate and e-liquid together. You will use 2ml of vape oil for every 1gm of concentrate. Put the shot glass into the boiling water and stir the concentrate and e-liquid together until FULLY blended. Use a syringe to draw the mixture and fill into a reusable cartridge. Enjoy.
Which is easier to load: a vape or a vaporizer?
Vape pens with shallower and smaller atomizers are usually easier to load since the coil is closer to the top. Deeper atomizers that have a higher capacity can sometimes be tricky to load small amounts into.
What is reclaim vape?
This is called “reclaim” by most people and could be comparable to resin that people scrape from a pipe used to smoke cannabis flower. I would recommend cleaning it out regularly. Save it for a rainy day if you happen to live in a more restrictive state and can’t always get your medicine easily. Take care and happy medicating.
Can you vape hemp in a vape pen?
Dry hemp can’t really be vaped in a vape pen. They sell vape pens for dry herbs, but they don’t really work. They end up combusting the plant material into smoke. The Snoop Dogg G-Pen is one example of a dry herb vape pen that doesn’t work.
How much BB do you need to load a pen?
With most pens you’ll want to load a BB-sized amount at a time, or approximately 0.1g. Depending on the consistency of your extract and the depth of your coil you might even be able to put a little on the tip of your finger to load it.
Where can I buy cbd wax?
Wax (I’m assuming the kind containing THC) can be purchased in states with legal cannabis laws. Otherwise CBD wax can be purchased online and shipped to nearly every state as far as I know. Good luck to you and happy medicating.
Do you need coils for a cartridge?
Nah man so if you’re using a cartridge, you don’t need coils because the cart has coils inside already. However, if you’re using WAX, and I don’t mean the wax that comes in carts, then you need an atomizer
How to turn on a dab pen?
Turn on the dab pen by clicking the power button five times which will start a blinking light. Click the power button and check the coil to make sure it is working. This will help make sure you do not waste your wax by placing it on the coil without knowing if your coil is working.
What is a dab stick?
They usually come with a dab stick or dab tool to help you carve out the concentrates and put it on the heating dab coil. Remember that when heated, the wax turns into liquid and runs so it can stick to the side or walls of the chamber. This can make it harder to vaporize all and can sometimes clog if not heated well.
How to pack a vape pen?
Learning how to pack your dab vape pen is very important. Go ahead and take off the mouthpiece attached to the chamber. Using your dab tool, scoop up a small piece of the wax. If you do not have a dabber tool, then you can use a paperclip too. At this point you can but dab the wax from the tool onto the coil.
Why is it important to clean your vape?
Making sure it is clean can make the difference between efficient vapor and mediocre quality. The main parts that need to be cleaned is inside the mouthpiece and the chamber. That's where any clogging can start to occur.
Why do people use vape pens?
Besides for being health conscious , one of the reasons why people switch to vape pens is because of the anonymity it gives. No one knows what you're doing and it's very quick. However, more people are learning about vaporizers so it's getting harder. Here are some ways to make sure you're vaping discreetly when around other people. Always remember to be respectful and mindful of the law.
What is wax chamber attachment?
Wax chamber attachments are usually small with a metal coil wrapped a wick or small ceramic rod. They usually come with a dab stick or dab tool to help you carve out the concentrates and put it on the heating dab coil.
Why do dabs break?
The breaking happens due to a fragile or worn down coil resulting in getting a replacement.
How long does it take to vape a wax?
For oils with a shatter or sappy consistency this only takes about 30 seconds. For Crumble and sugar wax it may take up to a couple minutes. Step 5 - Use a syringe and blunt tip dispensing needle to extract the infused vape liquid and fill a disposable cartridge designed for thick oils.
What is portable vape cartridge?
Portable vape cartridges are taking the medical and recreational weed markets by storm! They give users the ability quickly and discreetly enjoy their extracts without having to carry around pipes, papers, lighters, ect. A 2018 study found that 1 in 4 Cannabis users prefers using THC Vape Cartridges instead of flower, ...
How to make terpenes for flavoring?
Natural Terpenes for Flavoring (Optional) Step 1 - Add 1 Gram of concentrate to a glass mixing vessel. A shot Glass works great! Step 2 - Add 1ml (about 35 drops) of EJ Mix to the Mixing vessel. Step 3 - Microwave for 10 seconds. Step 4 - Stir until all the pieces of the wax dissolve.
How long does it take for wax to dissolve?
For oils with a shatter or sappy consistency this only takes a couple minutes. For Crumble and sugar wax it may take up to 10-15 minutes.
How long does it take for oil to soak in a cartridge?
Give oil about 15 minutes to fully soak into the wick / coils of the cartridge.
How to make a sanding pot?
Slow method ( recommended) Step 1 - Make a double boiler using a pot filled with a few inches of water and an empty glass mixing vessel with a heavy bottom. Step 2 - Heat the water in the double boiler to about 175 degrees fahrenheit (about 80 degrees Celsius).
Can you use a candy thermometer to measure temperature?
You can use a candy thermometer to get an accurate reading, but keep in mind it doesn't have to be perfect. If you don't have a way of measuring temperature, Just get the water hot enough to where you just start to see bubbles forming at the bottom of the pot. See Picture.
How to scrap shatter off a dabber?
Using a dabbing tool, scrap a small amount of the shatter on to the end of the dabber, and scrap it off into the chamber.
How to clean a vape pen?
It's time to clean out your vape pen. The first step is to dismantle the mouthpiece, the battery, and the chamber from each other. The mouthpiece is relatively easy to clean, just wipe with a sanitizing wipe. The chamber, containing the sensitive heating element is more difficult.
What happens if you overload a vape pen?
If you don’t load enough into the chamber, often the vape pen can have trouble producing enough vapor. However, if you overload, you’ll run the risk of overflow. If you ever tried to clean up a melted cannabis concentrate, you’ll know how difficult it is to clean.
How much capacity do you need for a vape pen?
Because there is such variation between the size of vape pen chambers, the rule of thumb is to fill up to 75% capacity. Do this until you get a better understanding of the nuances of your vaporizer.
What happens when you smoke a cigarette at a higher temperature?
The higher the temperature, the harsher the vapor will be , but the more powerful the pull. The temperature you want might also change depending on the shatter. Ultimately the smoking experience is entirely up to you, and how you like it.
How long to hold down the chamber button?
After closing the chamber, hold down the button for a few seconds.
What concentrates do smokers like?
It’s no secret that today’s smokers love concentrates, including budders, oils and shatters.
What tip do you use to inject concentrate into a vape?
Syringes With Slim Metal Or Needle Tips. You will need syringes that have that slim metal tip or are a needle in order to properly suck up then inject the concentrate e Juice into a vape cartridge or pod. Take a look at the tip I put on the syringe below. Just the tip baby, it is important.
How to make terpenes vaporizer?
Place your concentrate into your mixing container. Place it on top of your heating element. Heat the concentrate until it reaches a liquid state. Keep it at a lower power range that maintains that liquid state. Terpenes and THC will begin to vaporizer at about 315 Fahrenheit (156.67 Celsius), so it is recommended to keep it lower than that.
How to turn shatter into e juice?
There are a few different options out there for a diluent to turn your shatter (or other concentrate) into e juice. The easiest way is to get a pre-made diluent from places WaxLiquidizer or Shatter Batter. This option is preferred by many because it is easy. ANother great option that is completely terpene based is VISCOSITY Extract Luiquifier.
What concentrates are used to make e juice?
The following types of cannabis concentrate will work for making e juice: distillate, CO2 oil, live resin, sauce, shatter, and rosin. Shatter is the most commonly used for making THC vape juice. In fact, the first two do not need anything added.
Why decarb a BHO?
Decarbing your BHO can help it from getting crystalized in the cartridge later. Dewaxing BHO can help remove residual solvents and pieces of plant matter. This will make the vape run smoother and less likely to get clogged, but may be too advanced for the everyday user.
What diluents are used in cannabis juice?
Other common diluents are: Propylene Glycol (PG), Vegetable Glycerin (VG), Polyethylene Glycol (PEG),Medium Chained Triglycerides and Fractionated Coconut oil.
Can you vape distillate?
Distillate is often thin enough that it can be vaped directly out of an appropriate cartridge. You can mix terpenes into your distillate to add flavor. If you already have distillate that is not too thick skip this guide and get to refilling. Distillate and CO2 oil are similar but may have different extraction methods. Often CO2 oil is just referred to as CO2 distillate. Below is a picture of a distillate syringe. You will note it needs a metal tip in order to properly do the THC vape juice injection process listed as the last step.
