How do I refill my vape cartridge?
Refilling your vape cartridge is a simple 3 step process involving a syringe. Start with choosing your favorite oil or distillate. There are many options you can choose from; if you want, you can make your own oils or use a pre-filled distillate syringe from the cannabis dispensary.
How do you pack your vape cartridges when traveling?
For extra insurance, you can wrap your vape cartridges in bubble wrap or a soft piece of cloth, then keep them in a resealable plastic bag; you can also use a vape case. If you’re going on a long trip, you’re probably bringing extra vape e-juice and oils with you.
How to fix my vape cartridge is clogged?
Problem #6: My Vape Cartridge Is Clogged 1 Gently Blowing into the mouthpiece 2 Heating the cartridge using a blow drier set at a low temperature, or rubbing the cartridge in between your hands. 3 Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. 4 It also helps to regularly clean your cartridge.
How to reassemble a vape pen?
Unscrew the vape pen parts. Twist the parts counterclockwise to remove them. Set each part aside and in order so you know how to reassemble the pen. The bottom section of the pen is the battery. The part above it connects to the heating element, or coil. Notice how the wires run from the battery to the heating element.
How do I fix my vape cart connector?
0:031:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gentlyMoreAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gently catch underneath the edge of the connector. And tug.
How do I fix my Ccell cart?
A lighter or hairdryer will do the trick. If you're going to use a lighter, you'll need to hold it up to the clogged part of the CCELL. But if you opt for a hairdryer, blast the vape cartridge from a few feet away. This away, the heat levels will increase gently and evenly inside the cartridge and unclog it.
How do I fix my center pin vape?
1:112:43The Center Pin Issue - How to fix an eGo-T Battery DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can probably dig around and find whatever just make sure it's not going to break off and getMoreBut you can probably dig around and find whatever just make sure it's not going to break off and get stuck in there and you can gently push inside here and by pushing this disk.
How do you assemble a vape pen?
How do I put together the oil vaporizer pen?Check to make sure battery is fully charged.Examine battery contact head (the top of the battery that connects to the cartridge) for any debris. If there is debris, clean it before use.Attach battery to oil vaporizer cartridge.Connect mouthpiece to cartridge.
Can you dab a broken cart?
It is not safe to dab vapable THC juice from a cartridge. Do not do it.
What is the 510 connector?
The 510 connector get its name from the length of the connector and the amount of threads it has for it to make a connection. It runs 5mm long and 5 threads is on the male connection, which is on the atomizer, and the other 5 is on the female connection, which is on the battery or mod.
How are vape carts assembled?
To put it all together, first the atomizer is attached to the bottom of the chamber. Then the chamber is filled with oil. And finally, the mouthpiece is attached to the top of the cartridge, sealing the unit and making it ready for use.
How can I vape without a vape pen?
1:332:23*EASY*how to vape without a battery/ pen/boxmod - YouTubeYouTubeStart of suggested clipEnd of suggested clipDevice your cartridges your vape cartridge. You're gonna stake the black wire into the hole. AndMoreDevice your cartridges your vape cartridge. You're gonna stake the black wire into the hole. And then once you get that and you're gonna use the red wire and touch it to the side of the thing.
How do you hit a vape pen without coughing?
Tips for Cough-Free Vape Hits The best way to hit a vape pen is by taking a slow, steady inhale directly into your lungs. Stop before you feel your chest expand, and notice how you feel. This might be a 1-3 second draw. If you still cough, try taking a tiny “puff” and see if that helps.
How to fix a broken vape pen?
Before throwing away your broken vape pen, try clearing out any debris inside of it to see if that fixes the problem. Start by unscrewing your vape pen's heating chamber and brushing out any loose material. Once you remove the surface debris, dab isopropyl alcohol onto the coil to remove wax and oil.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
How to solder wires?
Heat the soldering iron and dab it against a wire solder. First, pick up a spool of solder wire from the home improvement store. Unspool it, laying the end of the wire near the wires you wish to solder. Turn the iron on and, after letting it heat for a minute, dab the tip against the end of the wire.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to clean a pen with isopropyl alcohol?
Pick up a bottle of isopropyl alcohol from a general store or drugstore. Moisten a cotton swab, but don’t soak it. You don’t want the isopropyl alcohol to drip into rest of the pen. Using the cotton swab, wipe down the coil and chamber if they appear blackened or covered in debris. Be gentle when handling the coil.
What to do if your pen won't work?
Turn on the pen and, if done correctly, it should work again. If it doesn’t, return the pen to the store to have a professional look at it or buy a new one. The wires may have come loose from their connections. This is hard to fix at home, especially if you can’t locate the terminals for the wires.
Where is the black wire in a furnace?
The black wire is the ground wire and runs from the battery to the outside of the heating chamber. Heat the soldering iron and dab it against a wire solder. First, pick up a spool of solder wire from the home improvement store. Unspool it, laying the end of the wire near the wires you wish to solder.
How to refill a cartridge?
Refilling your vape cartridge is a simple 3 step process involving a syringe. Start with choosing your favorite oil or distillate. There are many options you can choose from; if you want, you can make your own oils or use a pre-filled distillate syringe from the cannabis dispensary.
Step One: Remove the Mouthpiece
Open the cartridge up, and you can do so by twisting it counterclockwise until it is fully detached. You might have to twist it two or three full rotations to free the thread holding it in its place.
Step Two: Fill the Cartridge
This is the step where we will use the syringe we mentioned earlier. But if you do not have a syringe, an eye-dropper does the job as well. The former is more precise and has a lesser risk of leaking products.
Step Three: Replace the Mouthpiece
You are almost done! Take the mouthpiece and gently put it back onto the cartridge. Twist it around clockwise until it is tightly screwed on. While
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
What causes a short circuit in a battery?
Short circuit. Clean the electrodes on your battery, there is likely debris that has caused a temporary short. Cartridge is clogged, nothing happens when you pull. Depending on how it was put away or when it was used last there may be some some oil residue in the air hole.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
How To Pack Vape Cartridges
The most important thing to do when packing vape cartridges is to keep them spill-proof. Cabin pressure can cause full vape tanks or cartridges to expand, crack, and then leak, possibly leaving you with a bag full of e-juice or oil.
How To Pack Oils and E-Juice
If you’re going on a long trip, you’re probably bringing extra e-juice and oils with you. But be mindful to follow TSA rules about flying with liquids.
Flying With CBD Or THC Cartridges
Risks understood, there are ways to safely fly with CBD or THC cartridges. You can empty and thoroughly clean pens, vaporizers, and cartridges (to where there’s no cannabis residue at all), then take them as you would regular vapes.
