Insert the coil into the bottom of your vape, and twist it clockwise until it is secure. The white cotton should face upwards toward your tank. You want the coil to be tightly in place but not overly rigid. 3 Replace the tank after you put on the new coil. Once your new coil is in place, screw your tank onto the vape clockwise.
Full Answer
What makes the istick Pico so special?
Powered by single interchangeable 18650 cell, the iStick Pico also provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. With a compact size, you can hold the kit in the palm, much more convenient for usage and portability.
How do I change the battery in my istick Pico?
Once you’ve got a spiffy battery to use, you can get started! Simply remove the battery cap and pop your new battery into the iStick Pico with the positive (less exposed) terminal facing down into the device, and the negative end (more exposed) pointing out towards you!
How to install a vape coil?
Insert the coil into the bottom of your vape, and twist it clockwise until it is secure. The white cotton should face upwards toward your tank. You want the coil to be tightly in place but not overly rigid.
Why does my istick Pico switch back to VW mode?
If you use a common coil or a coil with a resistance above 1.5 ohm in this mode by accident, your iStick Pico will switch back to VW mode automatically. Let us know what you think!
How do I change the coil on my Eleaf iStick Pico?
0:583:16Tank stuck on istick pico fix - melo 3 atomizer - Change coils - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell you screw this off this makes it. So much easier to get this off because you get a grip. And.MoreWell you screw this off this makes it. So much easier to get this off because you get a grip. And. Once you screw that off. Here is your coil guys. So the cones release to get off just twist.
How do I setup my iStick Pico?
Simply remove the battery cap and pop your new battery into the iStick Pico with the positive (less exposed) terminal facing down into the device, and the negative end (more exposed) pointing out towards you! Screw on the battery cap and now you can power on the device by pressing the fire button 5 times.
What coil does the iStick Pico use?
Like its bigger brothers in the Melo line, however, it uses a full-sized factory coil head. Two heads are included in the Kit, both vertical Kanthal coils, in 0.3 ohm and 0.5 ohm resistances.
How do you clean an iStick Pico coil?
0:221:19MELO III Mini Atomizer - Quick Clean Between Flavors - eLeaf iStick PicoYouTubeStart of suggested clipEnd of suggested clipYou can take the top off give that clip wave in there. Pull your glass sleeve. Up make sure you don'MoreYou can take the top off give that clip wave in there. Pull your glass sleeve. Up make sure you don't have any juice in there you can give that a nice little wipe like that.
Is Eleaf Pico good?
The Eleaf iStick Pico mod is smaller than I expected, considering it is powered by a replaceable 18650 battery. It fits perfectly in my hand, which has to be said aren't the biggest. The rounded edges of the mod make it comfortable to hold even for prolonged periods. The build quality is excellent, it feels very solid.
How do I unlock my Pico iStick?
0:281:33How to Lock and Unlock an Eleaf iStick Pico 75w - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you just hold them. For. Hold him for a couple seconds boom unlocked and now there's no ID onMoreSo you just hold them. For. Hold him for a couple seconds boom unlocked and now there's no ID on there you know I can adjust the power.
What is the best wattage for a 0.3 Ohm coil?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is iStick Pico vape?
The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). Powered by single interchangeable 18650 cell, it provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR modes.
How do I use an iStick?
iStick 30W is the one you deserve to own. Press the square button for five times to turn on the battery, and then long press the square button to get a puff. Loosen the square button to stop puff. Switch the VV/VW mode: Press the square button for three times to switch the VV/VW mode when the battery is turned on.
How do I change my vape coil?
How to Change a Vape Coil in a Pod SystemWhen the pod is empty, remove it from the device and hold it upside down.Twist the pod's base to loosen and remove it. ... Pull the old coil out of the pod.Push a new coil into the pod.Replace the pod's base and refill the pod.
Why does my coil burn so quickly?
If the user vapes very regularly, the coil will quickly dry out in patches, or completely. When this occurs, it will often burn out. Many vapers unknowingly use the wrong e-liquid with the wrong type of device, leading to frustration when their coils keep burning without clear reason.
How long do vape coils last?
between 7 to 21 daysWhile the exact duration may differ from person to person depending on their personal vaping habits, most new coils are designed to last anywhere between 7 to 21 days. This varies depending on how well you care for and clean your device.
How to see your iStick Pico mode?
You can see your current mode by pressing the fire button 3 times quickly while the device is on and swap between the modes by pressing the up or down buttons to scroll through and then press the fire button to confirm your mode. The mode options are VW, Bypass, TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, and TCR-M3. The M1, M2 and M3 modes are user-adjustable temperature control profiles, which you can set up to fit the coil you’re using!
How to unlock resistance on Pico?
In this mode you can lock and unlock your resistance when the Pico is on by pressing the fire button and up button at the same time for a couple of seconds. This will lock or unlock the atomizer base resistance.
How to change wattage on Eleaf Pico?
You can adjust your wattage in this mode from 1w to 75w by pressing the fire button 4 times to enter the menu, then using the up and down buttons to select your wattage level. You may also adjust your temperature from 200 degrees Fahrenheit to 600 degrees Fahrenheit by using the up and down buttons to move in ten-degree increments. If you hold either the up and down button, you can scroll through these temperatures more quickly. In this mode you can lock and unlock your resistance when the Pico is on by pressing the fire button and up button at the same time for a couple of seconds. This will lock or unlock the atomizer base resistance. If your resistance is locked, a lock sign will be displayed and an ohm symbol will be displayed when it is unlocked. You’ll want to lock the resistance when your coil is at room temperature for the best results. If you take your coil out and replace it or place a new one, the Eleaf Pico may maintain the same base resistance even if the coil resistance has increased from a rise in temperature. When you take your coil out in unlock mode and then replace it you may see a message saying “New coil up, same down” since coil resistance can increase within a certain range. If you’re using the same coil, you’ll want to press the down button or press the up button if it’s a new coil. Always unlock the resistance if you’re changing an atomizer or swapping a coil out for one of a different resistance. If you use a common coil or a coil with a resistance above 1.5 ohm in this mode by accident, your iStick Pico will switch back to VW mode automatically.
What is a Pico mod?
The Eleaf iStick Pico is a box mod with 510 threading and a wattage range from 1 to 75W for compatibility with nearly every 510 attachment. It has temperature control modes for nichrome, titanium and stainless steel heating elements with a range of 200-600 degrees Fahrenheit. Temperature information, battery life, resistance and wattage are all displayed on the Pico's crisp OLED screen along with other alerts. The Pico's body is built from corrosion resistant aluminum-zinc alloy and stainless steel to be durable and long lasting. The Pico is powered by a single 18650 battery and charges through standard micro-USB for convenience. Firmware upgrades are also available through Eleaf's website and add additional settings and allow changes to be made to the logo and display layout. We suggest pairing it with a Saionara Vaporizer or the Saionara Top Airflow Vaporizer for some awesome clouds and great flavor!
What is the TCR of a nickel coil?
TCR values are dependent on the coils you use. Nickel coils have a range of 600-700. Titanium coils have a range of 300-400. A nickel and iron alloy will have a range of 300-400 and a Stainless Steel 303, 304, 316, or 317 coil will have a range of 80-200.
How long does it take for a Pico to shut off?
The Pico is built to protect your atomizer and will shut off output if a vaping time is longer than ten seconds. It will also display an alert on the screen to let you know! For Saionara atomizers, shorter button pulses will provide the tastiest clouds in our experience!
How many batteries does a Pico have?
The Pico is powered by a single 18650 battery and charges through standard micro-USB for convenience. Firmware upgrades are also available through Eleaf's website and add additional settings and allow changes to be made to the logo and display layout.
How big is the iStick Pico 25?
The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
Why lock the resistance when the coil is at room temperature?
1.Please lock the resistance when the coil is at room temperature so that the device can display the correct “base resistance”.
How to increase wattage on a TC-Ni?
in TC-Ni/TC-Ti/TC-SS/TCR (M1,M2,M3) mode, the output wattage can be adjusted from 1W to 85W. Press the fire button 4 times in quick succession to enter the wattage setting menu and press “+” or “-” button to increase or decrease the wattage level. Keep pressing “+” or “-” button without looseness to rapidly increase or decrease the wattage level.
How to change TCR on a spherical coil?
1. Press the fire button repeatedly to choose among M1, M2 and M3 modes; 2. Press the “+” or “-” button to increase or decrease the TCR value according to the material of the coil you use; 3. Keep pressing the fire button or stay in the interface for about 10 seconds to confirm your setting.
How to adjust temperature on TC-Ni?
in TC-Ni/TC-Ti/TC-SS/TCR (M1,M2,M3) mode, temperature can be adjusted from 100-315℃ or 220-600℉ by pressing “+” or “-” button, “+” button to increase and “-” button to decrease. Each press of the “+” or “-” button will increase or decrease the temperature setting by 5℃ or 10℉. Keep pressing “+” or “-” button without looseness can rapidly increase or decrease temperature setting.
What does it mean when a vape is working with a weak battery?
in all vaping modes, when the device is working with an atomizer and the voltage of the battery drops below 2.9V, the screen will display “Weak Battery”. Meanwhile, the output power will be reduced accordingly.
How to switch between stealth and stealth off?
press the fire button and “-” button simultaneously when the device is powered on to switch between Stealth On and Stealth Off mode. In Stealth On mode, you can vape with the OLED screen off and you can press the fire button once to see current setting.
How to change coil on vape?
Do this if your juice has a funky or burnt taste, for instance. To easily replace your vape coil, take off the tank and twist off the coil. Be sure to pre-saturate the cotton of your coil so it doesn’t burn. With proper maintenance, you can get full-flavored rips while keeping your vape in great condition.
How to take off a vape coil?
The coil is also called an “atomizer head” or “replacement head.”. You can use your hands or a paper towel to take off the coil. Twist the coil counterclockwise until it comes off of the bottom of your vape. A paper towel will help keep your hands clean.
How to get vape juice out of tank?
If there’s any vape juice still in your tank, dump it out. Next, unscrew the co il from the base of the vape by twisting it counterclockwise. Pre-saturate your new coil with 5 to 8 drops of vape juice so it won’t burn, then screw your new coil into place.
Why does my coil clog up?
If it has a burnt aftertaste or if the flavor seems sour, it is time to change your coil. Over time the juice starts to clog up the coil. If you use sweet, sugary juices, they may clog up your coil more easily. The sweetener essentially caramelizes on the coil as it heats up.
How to get rid of burns in vape coil?
1. Pre-saturate your coil with 5-8 drops of vape juice. The cotton in your coil is brand new when you take it out of the package. If you place it directly onto your vape, it will start to burn. To avoid this, drip about 5 or so drops across the cotton from the vape juice bottle.
How to unscrew a vape?
Every vape setup is slightly different, but in general, you can easily unscrew the tank from the bottom section. Hold the tank upside down and twist the tank off using your hands.
What to do if you have juice in your tank?
If there is juice in your tank already, you can use a paper towel to avoid getting your hands greasy.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
What does it mean when a vape exhales?
This does mean that they will use much more e-liquid and their battery will drain quicker.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What is the outer casing of an atomizer?
It is the outer casing which attaches directly to the base of the tank and provides electrical contact to the coil.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
