Lost Vape Orion Q Quick Start Guide Hold down switch and slide out pod Unscrew cap and fill with e-liquid Leave to prime for at least 10 minutes
What makes the lost vape Orion so special?
The Lost Vape Orion’s internals is where all the magic happens, and it starts with the Evolv DNA Go 40W Chipset. The chip allows for a maximum power output of 40W, it features a 3-step variable wattage control and comes equipped with Evolv’s latest Replay functionality.
What is the lost vape Orion Q pod kit?
The Lost Vape Orion Q pod kit is a super-fast follow up to the hugely successful original and with the Q standing for Quest is the hunt for the affordable high performance pod kit over? The original Lost Vape Orion Go was, it’s fair to say, expensive for a pod kit due mainly to the inclusion of the DNA Go chip.
What e-liquids can I buy with the Orion?
If you need regular e-liquids or salt nicotine e-liquid to go along with your purchase of the Orion, WCVS has a full range of the industry’s best e-liquid products, boasting the most delicious flavors and the industry’s leading brands.
What is the Orion replacement pod cartridge?
What’s most impressive about the Orion Replacement Pod Cartridge is the coils that it uses. There are two optional Orion Pod’s, one that is a 0.25-ohm SS316L Vapor-Focused Pod, and the other being a 0.5-ohm SS316L Flavor-Focused Pod.
How do you prime a Lost Vape coil?
0:471:52Priming a vape coil in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto theMoreGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto the wicking material down the middle hole put your vape coil in your tank fill your tank with the liquid.
How do you use lost vape Orion Q?
Lost Vape Orion Q Quick Start GuideHold down switch and slide out pod.Unscrew cap and fill with e-liquid.Leave to prime for at least 10 minutes.Click fire button x5 to turn on.Press fire button to vape.Adjust airflow via base of mouthpiece.
How do you reset Orion?
To perform a factory reset on your Orion 32, hold the Antelope button on the front panel and press preset 1.
How do you know if Orion Q is fully charged?
If the light is red, the charge level of the battery is 17 percent or lower. If the light is purple, the charge level of the battery is 64 percent or lower. If the light is blue, the charge level of the battery is higher than 64 percent.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
What does it mean when my Orion blinks purple?
In order to lock the Orion, simply press the fire button five times within two seconds. After it's locked, a purple light will be shown when you press the fire button indicating you're locked.
Do Orion Q pods work in Orion DNA?
One thing about the Orion and the Q is that the pods are not interchangeable. Unless you want to use the 1.0ohm pod on the Orion, you would have to add that profile through the Escribe software first and then use the cartridge that way. The Q is not compatible with the Orion DNA pods, unfortunately.
How do I reboot my mint phone?
Turn your device on, reboot and off To turn on your device, press and hold the power key. To reboot your device, press and hold the power key, select “reboot” and then tap OK. To turn off your device, press and hold the power key, select “power off”.
How do you reset a mint phone?
More videos on YouTube 2- Keep holding on volume down and power keys together for a few seconds in your Doogee Mint DG330. In some devices according to the Android version the combination can be the power key and the volume key up. 3- When the Doogee logo is displayed, release the buttons.
How long does it take for the Orion Q to charge?
It seemed like a lot more battery left than 17% but I won't complain. Unfortunately, you can't vape while you charge the device as there is no pass-through charging. Plugged into a USB wall charger the device took just over an hour to fully charge from dead.
How long does the Lost Vape Orion take to charge?
40 to 60 minutesThe Lost Vape Orion is powered by an internal 950mAH lipo battery and takes anywhere from 40 to 60 minutes to fully charge.
Is Lost vape still in business?
Lost Vape will continue to work with Evolv USA and use the latest DNA chips to design, develop and produce devices that belong to the higher-end of the electronic cigarette market in 2019.
What is the Lost Vape Orion Q?
So, what is the Lost Vape Orion Q? Let’s begin with an overview of this device’s features and basic specifications. As you’re about to learn, the Orion Q is a fair bit more advanced than most of the other pod systems on the market. With this device, we think that Lost Vape has struck a good balance between designing a device that’s simple enough for beginners and one that represents a real upgrade for someone who has outgrown their JUUL or other low-end vaping device.
How many watts does the Lost Vape Orion Q Pro have?
It has a slightly higher maximum power level of 24 watts. It works with both Orion Q and Orion DNA pods, and it has a version available with stabilized wood side panels.
How to fill Orion Q pod?
To fill the Last Vape Orion Q pod, simply twist off the top cap and fill the pod with e-liquid. Don’t fill the pod completely; leave a little room for air at the top. Replace the cap and take five long draws on the Orion Q without pressing the fire button. This primes the coil by ensuring that the organic cotton wick is completely saturated with e-liquid before you begin vaping. You only need to prime the coil when using a new pod for the first time. After you prime the coil, the pod is ready to use. Take several short puffs to ensure that the wick is completely wet. After you’ve done that, you can begin vaping with longer, deeper puffs.
How to charge Orion Q?
To charge the Lost Vape Orion Q, simply connect it to your computer using the included USB charging cable. The LED next to the charging port changes color to indicate the battery’s current charge status.
Is the Orion DNA Go the same as the Orion Q?
The Lost Vape Orion DNA Go is essentially the same device as the Orion Q, but it uses the Evolv DNA chipset rather than Lost Vape’s proprietary chipset. It’s significantly more expensive than the Orion Q because the Evolv DNA chipset is designed in the United States and is rather expensive for manufacturers to purchase. Both Lost Vape Orion DNA devices work with Orion DNA pods and do not work with Orion Q pods. Two different atomizer coil resistances are available. The Orion DNA Go can operate at three different power levels, and you can adjust those power levels by connecting the device to your computer and modifying its settings with the free Evolv eScribe software. You can also operate the Orion DNA Go at its maximum power level of 40 watts when you want extra vapor by using the built-in Boost function.
Does the Lost Vape Orion Plus work with Orion Q pods?
The Lost Vape Orion Plus DNA has all the features of the Orion DNA Go. Like the DNA Go, it also doesn’t work with Orion Q pods. The Lost Vape Orion Plus DNA has a new color variation with stabilized wood side panels available, and it features a replaceable coil system that allows you to replace the atomizer coil independently of the pod. Lastly, the Orion Plus DNA has five available power settings rather than three.
When was the Lost Vape Orion released?
The Lost Vape Orion was introduced earlier this year in 2018, taking advantage of the rapid growth in vapor pod systems.
What is the Orion replacement pod?
The Lost Vape Orion Replacement Pod Cartridge is a brilliantly crafted pod, featuring incredible quality by using stainless steel parts and a gold-plated connection. It offers a large 2ML e-liquid capacity with a sight window to view the current e-liquid level. It also has a Delrin drip tip at the top, which includes dual adjustable airflow control at its base. What’s most impressive about the Orion Replacement Pod Cartridge is the coils that it uses. There are two optional Orion Pod’s, one that is a 0.25-ohm SS316L Vapor-Focused Pod, and the other being a 0.5-ohm SS316L Flavor-Focused Pod.
What coils does the Orion pod use?
What’s most impressive about the Orion Replacement Pod Cartridge is the coils that it uses. There are two optional Orion Pod’s, one that is a 0.25-ohm SS316L Vapor-Focused Pod, and the other being a 0.5-ohm SS316L Flavor-Focused Pod.
Who is the founder of Lost Vape?
Established in 2014, Rocky Guo founded Lost Vape, a new vapor products brand that was set out to offer unique vaping equipment. Setting out to be different from others in the market, Lost Vape originally developed the Lost Vape Tan Box Mod, which was constructed out of ebony wood and utilized a high-end YiHi chipset.
What is a lost vape pod?
The complete guide to the Lost Vape Orion, a all-in-one vapor pod system that happens to be the first vape pod utilizing an Evolv DNA Chipset. The device is super compact, very portable, extremely convenient, yet it’s packed with the industry’s latest tech. As a result of its popularity, we’ve felt that it was a must to use the Lost Vape Orion as our next guide and we’re hoping it will help many of you learn how to use the device more efficiently for the best vaping experience possible. If you need help with your Lost Vape Orion Vape Pod and want to learn the ins-and-outs of its infrastructure, then this article will serve as an online Lost Vape Orion user manual.
Jeffypoo78 Full Member
Hello.. new to here.. cannot find answer anywhere. I have an Orion Q Lost Vape. Not the plus.. not the DNA. The Q. It charges.. it turns on.. and it turns off.. but every time I go to fire it.. it just blinks a dim purple light 4 times. It will not fire.
Superuser187 Ultra Member ECF Veteran
Hello.. new to here.. cannot find answer anywhere. I have an Orion Q Lost Vape. Not the plus.. not the DNA. The Q. It charges.. it turns on.. and it turns off.. but every time I go to fire it.. it just blinks a dim purple light 4 times. It will not fire.
Inside the Box
The box is a little less shall we say ‘flashy’ than usual hence the price point:
Key Features
As we’ve already established the Lost Vape Orion Q is the tamed down version of its predecessor the Orion.
Design and Build Quality
As I’ve just said there’s little difference in the design of the Q – so if you liked the original but felt it was a little expensive this half price version might suit.
How Does the Lost Vape Orion Quest Kit Perform?
On the original I fiddled about in Escribe and found on the 1.0ohm pod 15w was my preferred vape.
Final Review Verdict
The Lost Vape Orion Quest kit is marketed as a ‘Pod Mod For Everyone’ and I guess that stands up.
What is lost vape?
Lost Vape Orion DNA GO is the world’s first Pod Mod equipped with the highly sophisticated Evolv DNA Go Chipset. Pocket sized but packs a punch! Perfect for all levels of vapers and smokers who are looking for superior alternatives.
How long is the warranty on Orion DNA Go?
Lost Vape Orion Warranty: The Orion DNA Go device is covered by a 6-month warranty from the date of purchase.
Can you dry burn an Orion pod?
Do not dry burn the pod or cotton. Prior to use it is essential to fully saturate the cotton when having filled or refilled an empty cartridge. Orion Pods are not covered under warranty once opened, used, or filled with liquids.
Earn points for reviewing Orion Q by Lost Vape
Help fellow vapers choose the best product. Your opinion goes a long way. You will receive 10 Cloud Coins after each review which can be applied on your next purchase.
Description
Orion Q by Lost Vape is an all new AiO starter kit. The Orion Q is building on success of it’s predecessor the Orion DNA GO. Maintaining it’s premium design by utilizing a luxurious chassis construction with carbon fiber elements.
