how to prevent your vape from spitting liquid

^{Vaping 101: How to avoid spitback from your vape tank}

• Give your vape tank a flick. You may have seen experienced vapers giving their vape tanks a quick flick when they break out their vaping kit.
• Fire up your battery. Another great tip is push the button and fire up your battery for a few short bursts before you start to vape.
• Don't over-prime. If you've been vaping for a while you probably know about priming. ...
• Watch your vape tank. Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece.

Full Answer

How do I Stop my vape coil from spitting and popping?

Here are some ways to prevent spitting and popping from occurring. Don’t over-prime your coil – “Priming” your coil is the process of manually dripping e-juice onto the wicks before you first use it. If you put too much e-juice in the chamber, you can easily cause flooding issues and spitback.

What is a spitting vape?

A spitting vape is when excess e-liquid in the coil bursts from the coil, up through the mouthpiece, and into the vaper’s mouth. Spitback is instantly noticeable as the liquid in the mouth. The flavor and nicotine will leave a strong sensation.

Why is my vape flooding and spitting?

A failing or defective coil can also be the cause of flooding and spitback. If the coil is not fully heating or insufficiently heating then not enough vape juice will be vaporized. That will lead to flooding and vape spitting.

What causes vape juice to spit back?

Another common cause of spitback is using the incorrect vape juice that is not designed for a particular vape device. For example, a PG e-liquid will be too think for a sub ohm vape.

How to keep vapes from leaking?

Try to keep your vape positioned vertically if you’re not using it for extended periods of time. Don’t get into the habit of laying your device down all the time, or you will have to deal with inevitable leakage.

Why does my e-liquid spit?

Spitback has a simple cause: e-liquid gets pooled up on the coil itself and gets “cooked” instead of being vaporized. It spits similar to the way boiling water does, and with you inhaling from the tip, you can easily catch a droplet or two. The problem is closely linked to flooded coils, but, in some cases, it can happen even without flooding. Here are some ways to prevent spitting and popping from occurring.

How to stop vaping from flooding?

Reduce your airflow – Inhaling too forcefully when you vape encourages flooding by literally pulling more e-juice into the chamber. This is easy to solve: inhale more softly, letting the coil and wicking do the work for you. If you’re still having issues, try reducing your airflow setting. However, if you reduce the airflow, be careful not to inhale too strongly to compensate—this could just make the issue worse.

Why do multistrand coils pop?

Avoid exotic coils – This applies mainly to rebuildables. Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types. The easiest advice if you absolutely want to avoid spitback is using simple round wire instead.

What happens if you inhale too much liquid?

If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

What does it mean when a juice tank is not airtight?

Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.

What does it mean when you spit back vape juice?

Vape spit back is one of the most excruciating experiences you can go through as a vaper. Having hot vape juice land right into your mouth mid-vape is not something you expect or would like to happen again.

How to get rid of excess juice in vape coil?

You need to get rid of the excess juice in your vape coil. The easiest way to do this is to give the tanks a few short and sharp downwards flicks. To be on the safe side, flick the tank over a sink or have some tissue on standby in case the excess liquid comes flying out.

Can you use PG liquids on a wrong device?

It’s possible you’re using the wrong type of liquid for the wrong device . Ideally, PG liquids are runny and flow easily. As a result, they soak the wicking material faster, making it easier for the coil to end up taking in more liquid than it can vaporise.

Can a coil cause spitting?

While buying a new coil can be exciting, it can also be the start of your spitting problems. Some coils have some design oversights that can increase the chances of spitting. The Clapton coils are a good example. They have multiple stands which cause popping and spitting because of the design. You should also look out for twisted coils which also tend to have the same problem.

How to get vape juice to stop popping?

Another great tip is push the button and fire up your battery for a few short bursts before you start to vape. This will help the the excess liquid evaporate before you begin your vape session. If there's excess liquid in there, you'll hear a popping when you fire up the battery. Simply give this a few short bursts until the popping dies down or subsides altogether. It's a good idea to do this alongside the flicking strategy mentioned earlier.

Why does my vape tank spit back?

It isn't pleasant and it can happen often, particularly if you're a keen modder trying out different components to get the right 'balance' and find the perfect vaping experience. It happens when there's simply too much e-juice in the centre of your coil which can't be properly vaporised. Veterans know how to avoid this, but for those of you just starting out or looking for ways to curb sptitback, here are some things to bear in mind.

What does a downward flick do to a vape?

A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience. This is particularly good advice if you've just filled the tank - just be warned that it could get messy so be sure to do it over a sink or some tissue!

Where does vapor go when you vape?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale.

What does it mean to prime a vape coil?

Priming the coil means dropping some e-liquid directly onto it to saturate the wick and get the biggest bang for your buck in terms of flavour. Fans of big, flavoursome clouds will often prime their coils to get the best experience possible, but there is a risk of putting too much liquid in at once. Everyone that's primed a coil has had this experience and learned from it - don't be afraid to experiment and find the sweet spot for your vape kit!

How to stop vaping from spitting?

Press the fire button a few times before you start to inhale. Wait for the popping sounds to fade as your vaping device stops spitting. It won’t stop it spitting, but it’ll stop you getting in the line of fire and getting that spitback in your mouth.

How to keep vape juice from leaking?

When you lay your device down on its side, the vape juice seeps through the airflow holes and causes leakage. If you’re at home or in an office, or even in your car, put your e-cigarette down with the tank upright. If you carry it in your pocket, keep it the right way up. The worst culprit for causing the e-liquid to seep out is putting your device down at night – make sure you don’t lay it on its side as it’s going to be there for a long time.

How to reduce spitback and popping?

If you don’t want to increase the wattage on your vaping device because you prefer a cooler vapour, then you can reduce spitback and popping by reducing your tank’s airflow. By reducing the airflow to the coil, you limit the amount of e-liquid that is drawn up with your inhale. For this to work properly, make sure you don’t inhale harder to compensate.

How to make a coil vapor faster?

By increasing the power, you’ll make your coil vaporise the e-juice faster. It could be that your wattage is currently too low and so your wick is supplying e-liquid faster than the coil can burn it, which causes flooding. Increase the wattage, but do it gradually so you can monitor the effect as you don’t want to turn the power up too quickly and then burn the wick. This is particularly common with sub-ohm vaping as the wattage doesn’t need to be very high in sub-ohm coils for them to work.

Why do RBAs spit?

Twisted coils are particularly well-known for this as they have a lot of nooks and crannies which catch e-liquid, making it pool. Pooling e-liquid pops and spits when it’s heated because it cannot all be vaporised at once.

What are the O rings on a vape?

O-rings are the little rubber rings that stop your vape juice from leaking out of your tanks. It stands to reason, then, that if they’re worn or damaged, they won’t work properly and your e-juice will leak. Take your tank apart to check your O-rings. If they’re damaged, replace them. They’re not expensive and they’re easily available.

Why do drip tips work?

Some drip tips have been especially designed to minimise spitting by angling the tip more. It makes it harder for the spitting e-liquid to get out of the atomiser and hit your mouth as they hit the bend in the drip tip instead. Also, curved drip tips work in the same way. It doesn’t stop your atomiser from spitting but it does mean that you don’t get the spitback in your mouth.

Why does my vape pop?

The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.

How to get e-liquid into your mouth?

Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard. Let the coil and the wick heat the liquid. Inhale gently. You’ll take in pure vapor and have a more enjoyable, flavorful vape.

How to get rid of spitback on Fire tablet?

If you get spitback from too much priming, press the fire button two or three times. This will help clear out the excess liquid. A little practice and experience will tell you just how much e-liquid is perfect for your device.

How to clean e juice from chimney?

Here, the solution is simple. Remove your drip tip. Roll up some tissue paper, insert it into the tank and soak up the excess water. Regular cleaning will help you avoid this problem.

Can you use an RTA with a loose airflow?

You’ll make the problem worse if you use an RTA with a loose airflow. This forces air into the device.

Is it normal for a vape to pop?

Is your vape device starting to pop, crackle and spit back? Don’t worry, it’s not defective. A vape popping sound is normal for any device. Here are some quick, simple fixes.

Why do vapers take so long?

This is commonly due to the way in which the individual user to take drags from a cigarette, which tends to be rather vigorous.

How does a vacuum tank work?

In order for the vacuum effect to function appropriately, the tank needs to be well-sealed and air-tight. Check the assembly of the tank’s various components to ensure that everything is connected properly and securely. In addition, inspect the various parts for cracks or gaps that could potentially allow excess air to enter the tank. This can also contribute to flooding and gurgling.

Can you overfill a juice tank?

Some tanks are larger and can, therefore, hold a greater volume of juice, while others are smaller and can hold less. Regardless of the tank size, overfilling it can result in flooding, gurgling, and spit-back. As a general rule of thumb, you want to fill your tank to a level slightly below the air hole or chimney.