" " How To Prevent Spitting In Your Vape

Vape-FAQ.com

how to prevent spitting in your vape

by Karina Heathcote Published 2 years ago Updated 1 year ago
image

How to Stop Vape Spitting

  • Flicking the tank. You need to get rid of the excess juice in your vape coil. ...
  • Increase power. Flooding of the coils could be as a result of low wattage. ...
  • Go slow on the priming. Priming is highly recommended when you have a new coil. But, like everything else, too much of it can cause problems.
  • Fire first! The sequence of using your vaping device can result in flooding and spitback. Before inhaling the first time, press the firing button for a few seconds.
  • Change your e-liquid. It’s possible you’re using the wrong type of liquid for the wrong device. Ideally, PG liquids are runny and flow easily.
  • Soak up the e-liquid. If the spitting is happening often, the liquid may have collected inside the chimney and found its way back to the coil.
  • Cut back on the airflow. Reducing the airflow setting will save you the trouble of inhaling too forcefully on your vape, which can encourage flooding.
  • Take smaller inhales. A worthy alternative to reducing the airflow is to take short draws. ...
  • Choose your coils carefully. While buying a new coil can be exciting, it can also be the start of your spitting problems. ...
  • Cover the mouthpiece. Necessity has led some innovative vapers to come up with a smart trick that stops this problem in its tracks.

  1. Flick the tank. ...
  2. Remove excess liquid from your tank's centre post. ...
  3. Fire your battery before inhaling. ...
  4. Reduce your airflow, or take smaller inhales. ...
  5. Turn up the power. ...
  6. Don't over-prime your coil. ...
  7. Use an E Liquid With More VG. ...
  8. Cover your mouthpiece.

Can you get a vape spitting?

Not only can you get a vape spitting but you will also get a gurgling sound, less vapor, and sometimes less airflow. After a vape has been sitting all night, it is quite common for the first few hits of the day to have some gurgling and spitback.

How to fix a vape that spits back?

One of the quickest ways to handle spitback is to temporarily increase the wattage or temperature until the flooding and gurgling stops and then go back to your normal vaping temperature. This fix will handle flooding and spit back most of the time!

Why is my vape flooding and spitting?

A failing or defective coil can also be the cause of flooding and spitback. If the coil is not fully heating or insufficiently heating then not enough vape juice will be vaporized. That will lead to flooding and vape spitting.

How do I Stop my e-juice from spitting out?

Try another drip tip – If you have a 510 drip tip, try an anti-spitback drip tip. Angled designs make it harder for e-juice to spit all the way up into your mouth. Longer drip tips—especially if they’re curved or have a bend in them—solve the issue in the same way.

Why does my vape spit?

What is spitting vape?

Why is my vape juice leaking?

Why does my atomizer spit?

Why do vape coils gurgle?

Why is my atomizer not getting enough power?

What happens when you fire an atomizer?

See more

image

Why does my vape tank leak?

Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.

How to prevent juice from leaking?

Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.

Why do multi strand coils pop?

Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.

What happens if you inhale too much liquid?

If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

What does it mean when a juice tank is not airtight?

Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.

Can you fix a wick on a RTA?

Fix your wicks – If you’re using an RTA and spitback is a problem, you may need to re-wick your coils. It might take some experimenting, but the aim is to cover the channels leading from the tank to the chamber without completely blocking them with densely-packed wick.

What does it mean when you spit back vape juice?

Vape spit back is one of the most excruciating experiences you can go through as a vaper. Having hot vape juice land right into your mouth mid-vape is not something you expect or would like to happen again.

How to get rid of excess juice in vape coil?

You need to get rid of the excess juice in your vape coil. The easiest way to do this is to give the tanks a few short and sharp downwards flicks. To be on the safe side, flick the tank over a sink or have some tissue on standby in case the excess liquid comes flying out.

Can you use PG liquids on a wrong device?

It’s possible you’re using the wrong type of liquid for the wrong device . Ideally, PG liquids are runny and flow easily. As a result, they soak the wicking material faster, making it easier for the coil to end up taking in more liquid than it can vaporise.

Can a coil cause spitting?

While buying a new coil can be exciting, it can also be the start of your spitting problems. Some coils have some design oversights that can increase the chances of spitting. The Clapton coils are a good example. They have multiple stands which cause popping and spitting because of the design. You should also look out for twisted coils which also tend to have the same problem.

Where does vapor go when you vape?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale.

What does a downward flick do to a vape?

A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience. This is particularly good advice if you've just filled the tank - just be warned that it could get messy so be sure to do it over a sink or some tissue!

Can you spitback at a vape tank?

You go to take a nice long draw from your favourite e-juice only for your vape tank to spitback at you. It isn't pleasant and it can happen often, particularly if you're a keen modder trying out different components to get the right 'balance' and find the perfect vaping experience.

The coil could be the culprit

One of the most common causes of e-liquid spit back is due to over-flow of e-liquid on the coils. When you prime your coils, sometimes excess liquid can get in the coils, causing it to spit-back when you fire your mod.

Adjusting the airflow of your tank

Sometimes e-liquid spit back happens because your air-flow is allowing juice to flood in the coils. This usually occurs when you are using e-liquid with more PG ratio than VG. Because PG is thinner in nature, it can easily drench your coils with the liquid which can produce spit-back upon firing the mod.

Spit-back due to environmental temperature

Did you know that temperature can cause your e-liquid to become thinner? When you expose your tank or mod to warm temperatures, your e-liquid becomes thinner and it starts to accumulate on the coils. When you finally fire the mod, it creates spit back.

Change your coil altogether

One of the quickest and most effective solutions to deal with annoying spit-back is by changing your coils altogether. If you are using a mod with pre-built coils, then it is highly likely that your coil is the culprit.

Adjust the wattage of your vape mod

As mentioned earlier, if the e-liquid has more PG ratio than VG, it may be thinner than usual and may flood your coils. Adjusting the wattage of your vape mod can usually fix this issue.

Why does my vape spit?

A vape spitting is usually caused by atomizer flooding. Spitting often happens in conjunction with the gurgling sounds that indicate flooding. Temporarily increase the wattage setting to vaporize any excess juice to handle spitback. Make sure your coils heat evenly.

What is spitting vape?

What is spitback or a vape spitting? A spitting vape is when excess e-liquid in the coil bursts from the coil, up through the mouthpiece, and into the vaper’s mouth. Spitback is instantly noticeable as the liquid in the mouth. The flavor and nicotine will leave a strong sensation. If vaping at high wattages, the liquid may also be hot ...

Why is my vape juice leaking?

A defective or worn out O-ring may allow excess vape juice to seep into the atomizer. Check and replace the O-rings if you are getting persistent flooding even with new coils. Gravity can cause flooding and spitback. If a vape is left on it’s side or upside down, vape juice can leak into the chimney and mouthpiece.

Why does my atomizer spit?

There are a number of reasons that an atomizer coil might flood. A failing or defective coil can also be the cause of flooding and spitback. If the coil is not fully heating or insufficiently heating then not enough vape juice will be vaporized. That will lead to flooding and vape spitting.

Why do vape coils gurgle?

This is because overnight the liquid can seep into the coil. Usually, after a couple of vapes the flooding clears up and you don’t have to worry about it for the rest of the day.

Why is my atomizer not getting enough power?

Another problem could be that the atomizer is not getting sufficient power from the battery to fully heat because the contacts are compromised.

What happens when you fire an atomizer?

When you fire the atomizer, the vapor coming up through the flooded juice makes the liquid spit and jump up the chimney and through the mouthpiece. Spitback liquid can be hot and uncomfortable but usually it is just annoying to taste the raw liquid in your mouth. I know, I said that twice now. But it is true!

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9