how to prep a vape tank for new flavor

Step 1: Open the Tank

• Open the Refill Hatch. If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open...
• Unscrew the Top. If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip...
• Remove the Bottom. If your vape is a bottom fill rig, then you will need to flip the entire tank head...

Full Answer

How to fill a vape tank?

The first step is to get your tank open and prepare to fill it. If there is a fill latch on top of your vape, between the tank and the drip tip, flip this open now. Use force if there is a button, but do not wrench it too far open. Usually, these swivel a certain distance, then stop.

How do I get the most flavor out of my tank?

Here are the instructions on how to get the most flavor from your tank Grab your coil and drop it on your bowl of choice. Start pouring the grain alcohol into the bowl, right over the coil head. Leave your coil head in the bowl for 6-12 hours.

What kind of vape tank should I get?

Most vapers start with traditional sub-ohm tanks and then, once they’re more familiar with the technology, move on to RDTA, RDA or RTA tanks, as these cost less to run and produce MASSIVELY better flavor. I would advise you do the same eventually, as you will save A LOT of $$$ in the long term. It can be tricky and a little fiddly at first.

Should you clean your vape coils and tanks before dripping?

If cleaning your vape tank and coils is a hassle, then dripping might be the solution for you. For vaping aficionados who love to constantly try new e-juice flavors, cleaning vape coils and tanks might seem like too much. Instead of doing so, you can simply invest in a rebuildable dripping atomizer (RDA).

How do you change the flavor on a vape?

Simple, put that coil in a zip-lock bag labeled with the flavors name. Next time you decide to vape that flavor again, switch back to it. After changing your coil, prime it and wait at least five minutes before vaping and trying out that new flavor.

Do I need to change coil when changing flavors?

Change the coil The wire coil in your E-Cigarette can wear out and the wick can burn, so changing your coil is another important thing to do to maximise new e-liquids. It's good to do it every couple of weeks, or monthly at most. If you're not sure how often you need to change it, you should be able to tell.

How do I make my vape juice more flavorful?

Often, when someone is not getting enough flavor from their vape juice liquid, they are not letting it steep long enough, which is just letting it spend time in a cool, dark place. Steeping will let the flavor settle and can substantially improve the flavor.

How do you clean a new coil flavor?

Cleaning rebuildable coilsRemove the wicks from your coil.Lightly dry burn your coils (do this on a low wattage and don't let them glow too much)Remove the atomizer from your device.Place it under warm running water.Brush the coil lightly with a coil cleaning tool or toothbrush.Rinse the atomizer once again.More items...•

How long should I let a new coil soak?

It's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.

Can you rinse a vape coil?

Here is how you should clean your replaceable coils: Let your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.

Why can't I taste the flavor in my vape?

Vaping can sometimes cause a dry mouth simply by requiring so much mouth breathing (inhaling a vape), which can dry up saliva. When we don't have enough saliva, the ability to taste is almost non-existent. Flavor fatigue is another culprit behind vape tongue resulting in you not tasting your e-juice.

What wattage gives the best flavor?

The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.

Should I shake my vape juice?

With both the layering of flavors and the off-gassing of molecules being huge problems, how could it even be possible to fix the flavors in your e-juice? That's right, you guessed it. Shaking the e-liquid bottle mixes up all of those layers that settled over time, and mixes the gas back in as well.

How do you break in a new coil?

Here is how to make coils last longer by breaking them in gradually:When you start vaping, set the wattage to the lowest recommended setting.Take a few short vapes to slowly start to break in the coil.Increase the power by 5 watts.Take three normal vapes and increase power by 5 watts.More items...•

How many puffs Should a coil last?

On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.

Can you change vape juice without changing coil?

How to change vape juice starts with swapping out your cotton or coils. If you don't, your new flavor will be altered by residual traces of the previous e-juice that you were vaping.

How to fill a vape with no access hatch?

If there is no access hatch, your vape may be designed to fill with the top removed. Twist off the drip tip top of the vape pen until you find where you can load the tank. Look for the plastic ring with the oval opening.

How to know if a vape is easier to refill?

Any vape is easier to refill when you know how it opens and how it is meant to be loaded. Take a close look at the tank and examine the pieces.

What is the oval opening on a unicorn vape?

The oval opening in top fill vapes is designed to direct your unicorn tip to the correct place. But even without it, all you have to do is try to get the liquid to flow down the side of the glass. Be careful not to over-fill your vape. Many tanks have fill lines. If yours doesn't, stop before the tank is 3/4 full.

How to tell if a tank is top or bottom filler?

Often, you can tell a top filler because between the drip-tip and the tank will be a plastic ring layer with an oval opening, that oval is where the tank would like you to fill it. Bottom fill tanks are becoming more common and will need to be flipped upside down to load.

Do you have to be a first time vaper to use a vape tank?

April 19, 2019. You don't have to be a first-time vaper to be completely stumped by a vape tank. To be frank, vape tanks come in all shapes, sizes, and designs. Some open from the top, some open from the bottom, and some are weirdly unique to their model.

Can you use an old wick for a new flavor?

Do not use an old wick for a new flavor. If you want multiple flavors, consider keeping a wick assigned to each one. When you switch flavors or throw out a tank of old liquid, always switch out the coil/wick as well. This ensures you're always vaping with a coil soaked only in your current flavor.

Do you need to dump out e-liquid?

If the remainder is fresh and you want to mix flavors, however, the dump-out is not necessary.

How long should I leave my coil head in the bowl?

Leave your coil head in the bowl for 6-12 hours. This does seem like a lot of time, but leaving it soaking for this long will pull all the gunk out from your coil.

What is a vapebox?

Vapebox is a subscription service that sends out new vapes and e-juice every month. Every box is custom tailored to your preferences. You can even enjoy the variety between a Sub-ohm Tank, RDA, or RTA.

Who is Shirley from Vapebox?

Shirley is a writer for Vapebox. Her current favorite e-juice is Naked 100 Lava Flow. When she's not researching or writing on the vape industry, she enjoys hiking and all things nature. Photography is also one of her other favorite past-times.

How to Prep New Coils for Vaping

Okay, so I covered why you should do it, but now let’s jump to the practical part. Priming your coils isn’t an exact science but you can mess it up pretty fast if you are not careful.

How To Prepare MTL Vape Coils

Mouth-to-lung coils are specific because they have resistances higher than 1.0 ohms. They are very popular with former smokers since they mimic the process of smoking regular cigarettes. If you decided to start vaping not so long ago, and are currently transitioning from heavy smoking I highly suggest starting off with an MTL device.

Prime Your Coils & Vape Like a Boss

And there you have it — everything that you need to know about priming your coils… and then some.

What is the best vape tank?

The best quality vape tanks, found at Mig Vapor, are precision engineered and the coils thread easily into place. Once the coil is inserted, place a couple of drops of e-liquid through the top opening of the coil directly on to the cotton material.

What is the resistance of a vape coil?

The most common types of vape coils are: Sub ohm vape coils – atomizer resistance is less than 1.0 ohms.

What is a vape coil?

A vape coil is a cylindrical device that contains the atomizer wire and wick in one piece. The atomizer coil itself is made of metal. The most common type of metal used is Kanthal. Although other metals such as stainless steel or nickel are used for temperature control vaping. The metal coil resembles a coiled spring.

How to prime a sub ohm coil?

To prime a sub ohm atomizer coil, the first thing to do is insert the new coil into the base of the vape tank. The best quality vape tanks, found at Mig Vapor, are precision engineered and the coils thread easily into place.

What happens if you don't prime your vape coil?

If a coil is not properly primed, the first vape could potentially fry the coil and for sure get an unpleasant burnt tasting vape. In addition, the coil will likely be ruined and require replacement. Ruining a new vape coil on the first vape equates to money down the drain.

Why is vape wick saturated?

First, the vape wick replacement is saturated to avoid a burnt taste or cause coil damage. Next, the coil life is extended. Overall, coil life will be affected by how much you vape and the wattage. The idea is to get the most coil life you can because that’s money!

What is the wick on an atomizer made of?

As you can see in the image above the atomizer coil is surrounded by wick. The wick is usually made of organic cotton although other fibers such as bamboo can also be used. The coil and wick are in direct contact. If the wick is dry and the coil is heated, the cotton will burn.