All vape kits are shipped with the units locked (turned OFF). To turn your Phantom ON you have to click the button five times rapidly to get it to fire up. You will see all LED lights blinking a few times (4 voltage/temperature indicators) and vape usage indicator light dot above the button.
Full Answer
How to use a phantom vape?
Remember about the gasket – the easiest way would be to gently push the rubber band into the bottom of mouthpiece and then screw it on top of the tube / bottom of the tank. Next screw the magnet adapter, drop it into a Phantom battery and start vaping.
How long does it take to charge the Phantom vape cartridge?
Time to charge it full from zero is approximately 2.5h This vaporizer is meant for thick oil and wax concentrates vaping, however, the 510 thread Phantom vape cartridge works great with any type of e-juice. The unit has 4 temperature (voltage) modes. 3.4V (Red LED), 3.6V (Yellow LED), 3.8V (Blue LED) and 4V (Green LED).
How to activate vape pen batteries?
Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation. The wonderful thing about inhale activation is that you don’t have to turn it on, since it works only when you use it. Button activation batteries will likely arrive OFF, so turn it on before use.
How does the honeystick Phantom vaporizer work?
The HoneyStick Phantom vaporizer comes with a unique wax / concentrates vape adapter as well as with DAB Tool. The Phantom wax atomizer is made out of 3 parts which you will screw together. Top mouthpiece and cover, the middle part with the filter, preventing any concentrate from getting into mouthpiece when inhaling.
How do I turn on my Phantom vape pen?
1:598:18Troubleshooting HoneyStick Phantom Oil/Wax Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you have to click the click the button five times rapidly to get it to fire up. And when you seeMoreSo you have to click the click the button five times rapidly to get it to fire up. And when you see it blink. And then when you push.
How do you turn up the power on a vape?
The button often doubles as a voltage regulator; by pressing it three times, you can adjust the power output that heats the e-liquid. Nowadays, you'll also find a lot of draw-activated vapes. These devices don't need to be turned on before use.
Why will my vape not turn on?
It has run out of battery Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on. So, the first thing you should do is try charging your electronic cigarette again and see if this makes a difference.
How do you use a phantom vape?
Voltage Settings: The Phantom has four voltage settings: 3.4V, 3.6V, 3.8V, and 4.0V....How to Use(Recommended) Make sure to charge the Phantom before turning it on.Screw the cartridge or the atomizer onto the magnetic adapter, then place it into the cartridge opening.Turn on the device by squeezing the vape five times.More items...
How do you turn on a vape without the button?
It really doesn't get any easier than turning on a buttonless vaporizer pen. There's nothing to push or do to turn it on or take a hit. Simply press the mouthpiece to your lips and inhale. The vape pen's technology is rather advanced, as it offers the greatest vapor possible to the user.
How do you unlock a vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
When I press the button on my vape nothing happens?
Try cleaning the battery terminal and end of your clearomiser with a cotton bud. Another thing to check is that the tank or clearomiser is making contact with the battery terminal. If a previous tank has been screwed on too tightly, the battery pin may need adjusting to make a connection again.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do you reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I turn on my Oilax?
The Oilax Cito is so simple that you can call it a bit of a spartan vaporizer. Loading your preferred cartridge for oil is easy through the magnetic adapter on its body. Just press the firing button five times to turn the device on or off.
Why is my honey stick blinking yellow?
Usually this means the atomizer is either burnt out, the cartridge is bad, or the cartridge is not attached to the battery properly. Can the honeystick sub ohm for thick oil be filled directly with distillate like the pre-filled cartridges are? Yes, the sub ohm unit can work well for basically all textures of oils.....
How much power does a Phantom battery give?
Depends how long and how often you use it. The Phantom battery will usually provide enough energy to vape about 0.5ml (0.5g) of cartridge. A typical Lithium-ion battery will lose 20% of its capacity after 300 full cycles. It will continue to supply the same power, but will not last as long between charges.
How to clean a vape battery?
These points are located at the top of the battery and the bottom of the cartridge. Remove cartridge if installed, then clean with a cotton swab and a small amount of rubbing alcohol.
How to use a vape pen?
If you are brand new to using a vape pen, it’s easy! Simply press the button on your battery, and inhale while drawing vapor from the mouthpiece. With an inhale activation battery, you won’t even need to press a button. Over time, you will learn what works best for you.
How to turn on a vaporizer pen?
To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on. Once it is on, it’s ready for use. If your vape pen is button activated, simply hold down the button as you draw from the mouthpiece of your cartridge. You’ll want to make sure you vaporizer battery is charged ...
How long does it take for a vape battery to change colors?
It usually takes 2-3 rapid clicks of the button on your battery for the light to change colors. Each vape is different, so check your user guide to learn your specific voltage settings. If you ever have a question on your battery, you can always reach out to the friendly team over at VPM for support.
What is the bottom airflow cartridge?
Bottom-airflow cartridges have an air hole in the middle of the pin on the bottom of your cartridge. This allows the battery to activate when you inhale. Bottom-airflow cartridges will work with inhale and button activated batteries.
How to clean a battery?
Clean the inside of your battery with rubbing alcohol and q-tip to remove any oil build up. Only use a little bit on the q-tip, and allow some time to dry before using. Avoid using and storing your battery in extreme temperatures, and always keep your battery away from water and extremely humid conditions.
Do you need a top airflow cartridge for vaping?
If the answer is yes, you have a top airflow cartridge. These are a little less common, but they will only work on button activated batteries. 3. Charging your Battery. Charging your battery is crucial to your vaping experience. Most vapes will either use a Micro USB charger, or come with a vape pen charger.
Do vape batteries need to be charged?
Many vape batteries come somewhat charged, but we recommend charging before use to get the most out of your vaping sessions. Once your vape pen is on, there are two different ways you could activate the batteries: Inhale activation & Button Activation.
What is a Phantom wax atomizer?
The Phantom wax atomizer is made out of 3 parts which you will screw together. Top mouthpiece and cover, the middle part with the filter, preventing any concentrate from getting into mouthpiece when inhaling. Bottom heater – with ceramic bowl and dual quartz heater coils.
What is the Phantom Pre Heat function?
Phantom’s Pre-heat Functionality. The preheat function is meant for vaping thick concentrate oils or wax. It could be used to initially ‘break’ your shatter concentrates or almost solid thick oils, turn them into more manageable warm liquid without applying full heat to it.
Can you use an Apple power adapter with Honeystick Phantom?
Now connect it to a USB wall adapter. We recommend not to use an Apple or iPhone power adapters because HoneyStick Phantoms will most likely not get a full charge off it. Make sure your device is getting a full charge and is holding a charge.
Do wax cartridges burn out?
If you’ve been using the wax cartridge extensively you may need to replace it. Like any coil, they do burn out over time. Burn out quicker if you overpower them or if you’re using your dab tool and you poke too hard and knock one of the electrical coils out of handlers – then you would need to get a new dab atomizer.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
What is the best way to feed phantom power to a microphone?
Audio Interface. For home studio owners this is the most common way of feeding phantom power to your microphone. A good audio interface is much more than just a provider of phantom power; that is not the reason why you should buy one of these. Audio interfaces will translate analog into digital and allow you to convert any PC in ...
How many volts is phantom power?
Mostly phantom power is 48 volts and you might encounter the switch to power it on labeled as “48v” or just “phantom power”. I have written an article on phantom power. You can read it here.
What is phantom power?
If you ever wondered what phantom power actually is, the answer to that question could be electrical power traveling through the XLR microphone cable (in most cases) and reaching the condenser microphone. Once there, the electrical current amplifies the sound coming out of the capsule making it usable in a recording studio.
Why does a USB condenser lower the quality of recordings?
Dividing power from the USB connection to power the interface and the condenser might lower the quality of your recordings because instead of 48v, your microphone could be getting less while power is routed towards speakers or headphones. You can solve that with an inexpensive external phantom power supply.
Do you need phantom power for recording?
If you are going to be recording audio, you are going to need phantom power . It is a fact. To me, the best way to do it is to get an external source that also works as a preamp. Once you have mastered that preamp, you’ll find yourself automatizing many of the vocal processing for all projects and saving lots of time.
Do dynamic microphones sound the same?
Well, the answer to that question is very simple: they don’t sound the same. In fact, they don’t even have the same amount of gain. If you were to capture a quiet sound source utilizing a dynamic microphone you would have to really crank it.
Can you power more than one condenser?
Finally, you have the ability to power more than one condenser or plug in more than one audio source. For example, if you are a podcaster you can do a live show hooking up external music sources, more than one microphone, and making decisions on the fly.
