Iolite Vaporizers To start your Iolite classic vape, simply switch the butane gas on and press the starter button to ignite the vaporizer. Within a minute the Iolite should be hot enough to produce vapor.
How do you use Iolite vape?
1:434:30Once loaded first turn on the unit by turning the switch from zero to one and you should hear theMoreOnce loaded first turn on the unit by turning the switch from zero to one and you should hear the gas flowing. Pushing the clicker slowly. And the unit should ignite.
How do I clean my Iolite vape?
– When you want to clean the chamber, soak a cotton bud in isopropyl alcohol, remove the excess with a paper towel and wipe the inside of the chamber. Remember to wait for a few hours, until all the remains of the alcohol evaporate, before you start another session.
How do you unclog a vaporizer?
0:311:47With a long toothpick. You can gently poke through the steam outlet and drain hole if they've becomeMoreWith a long toothpick. You can gently poke through the steam outlet and drain hole if they've become obstructed.
Why is my vaporizer not heating up?
If your vaporizer isn't lighting up, heating up, or creating vapor, then the problem might be the battery. Is your battery charged? A dead battery is a common reason for why a vaporizer won't work. Try fully charging your battery and then trying it again.
What is an iolite vaporizer made of?
A: The Iolite Original portable vaporizer is made of ultem, which is a very high grade, strong, quality plastic. It is also odourless and tasteless.
How long does it take for an iolite to reach its optimal temperature?
Q: How long does it take to reach the optimal temperature on the Iolite Original Vaporizer? A: For the Iolite Original to reach its optimal temperature takes about 45 – 60 seconds.
How long does it take for iolite to cool down?
A: After switching the Iolite Original off, it can take about 3 minutes to dispel all residual gas. So it is recommended to allow some time for the unit to cool down before you put the vaporizer away.
Where is the ON/OFF button on an iolite?
A: There is an ON/OFF button located at the side of the Iolite Original. The unit is turned on when the ON/OFF button is set to 1, when it is set to 0, the vaporizer is turned off.
Is there a butane level indicator on a vaporizer?
A: There is no butane level indicator on the vaporizer, so it is best to count your vaporizing sessions to keep track of where you are up to with the gas level of your device.
How to start a vape with iolite?
With the iolite you first flip this switch on the side from 0 to 1, to start the flow gas, then you wait a few seconds and push the igniter switch.
Where is the Iolite vaporizer made?
The IOLITE is a unique little portable vaporizer made by a company in Ireland called Oglesby & Butler. They also make the WISPR, which is very similar but slightly more expensive.
How to fill a butane can?
You’ll want to hold the iolite right side up, and the butane upside down. You’ll fit the nozzle of the can onto the fill valve located here, then you’ll push down to start the flow and as soon as you hear or see the gas start to overflow you know the chamber is full, and it should only take a few seconds.
What temperature does a vape chamber need to be?
The heating element uses the gas to heat the herb chamber to optimal vape temperature, in this case 374°F or 190°C.
How much does a walkie talkie vaporizer cost?
This unit is sometimes called the walkie-talkie vaporizer because of the way it’s shaped, and the retail price from authorized dealers is $199.
What is the sister model of the Iolite?
If you want to see how the iolite compares to other portable vaporizers, including its newer sister model the WISPR, check out my website VapeCritic.com.
How long to wait after refilling butane?
After refilling the butane you’ll want to wait a few minutes for it to settle down before igniting the Vape.
What is the original Iolite?
The original IOLITE – the ultimate portable vaporizer. Our first portable vaporizer is still a classic and a best-seller.
Why Iolite?
From the moment we designed and produced the world’s first butane powered vaporizer, it’s always been about the user-experience and quality for us. Designing good looking vaporizers is one thing. Providing you, our customer with everything you want in a vaporizer is something else. And that’s what makes us stand out from the crowd – we know how to combine good looks and usability in one perfect package. Be it our original IOLITE vaporiser or our premium WISPR2 product, we know a thing or two about vaporizers.
What is an iolite vaporizer?
The Original Iolite is a simple and affordable handheld vaporizer that requires no batteries, no flames, and no wires whatsoever. This handy portable vape is powered by butane and features an ergonomic design for easy use on the go. Simply load your butane into the chamber on the bottom of the vape, then open the loading chamber on ...
What is the original iolite?
The Original Iolite is a simple and affordable handheld vaporizer that requires no batteries, no flames, and no wires whatsoever. This handy portable vape is powered by butane and features an ergonomic design for easy use on the go.
How long does it take for an iolite to go off?
When the unit is heating up an orange light will illuminate. Once you’ve reached the ideal temperature, this light goes off (usually after around 60 seconds). This means you’re ready to vape. The Iolite is quick and efficient, making it ideal for someone who is new to vaporizing.
How to use butane in a vape?
Simply load your butane into the chamber on the bottom of the vape, then open the loading chamber on the top and insert your finely ground material. Then reattach the mouthpiece and click the activator to start the catalytic reaction which heats the material in the chamber.
