Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers. Dribble a Little Vape
How to install a vape juice coil?
Oct 08, 2019 · They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands. Freezer: Only try this one when the tank has been removed from the rest of the device.
Can You rebuild your own coils when vaping?
Apr 04, 2019 · Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.
How do I replace the coil on my innokin adept?
The tank opens at the top; press downwards on the top cap and twist it anticlockwise at the same time to open it up. If you've opened an e-liquid bottle before, it's the same action. If you're still having trouble, watch 5:15 - 5:23 of this video review of the Innokin Slipstream and iTaste Kroma. Submit a ticket.
Is your vape tank stuck?
Defect coils. Suggestions&solutions：. Make sure to prime your coil upon first use. 1 drop of e-liquid per cotton juice port is enough. Once primed, allow the coil to stand in a 3/4ths full tank for at least 15 minutes before vaping. Allow your coil to "break-in" before using it at the maximum recommended wattage level.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What to use to unlock a vape?
Any pliers that fit around your vape can potentially help (except maybe needle-nose in this case) but everyone's toolkit or garage jumble contains a different set of pliers. So you work with what you've got. Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers.
Why is my vape tank stuck?
But sometimes, on fateful days when the planets are out of alignment, your vape tank gets stuck closed. Maybe the tank is jammed on the top of your battery/mod. Or no matter how hard you twist, you just can't separate the coil from the tank, or the tank from the top. More likely than not, your issue is with an Eliquid tank - but if it is because of sticky cannabis oil ... well our first suggestion is to switch to a better product: CBDX Delta 8 THC Cartridges.
How to get a stuck vape tank out of the freezer?
Here's a trick we learned from some really clever desperate vapers: If the stuck tank is already separated from the battery, try throwing that sucker in the freezer for a few hours . Tanks seal over rubber gaskets, which swell in the heat and shrink down to very hard little rings in the cold. In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
Can you vape if you are old?
If you're old enough to vape, your parents are probably old enough to be retired or looking forward to retirement. And you'd think that would make them less talented at wrenching open stuck things. But sometimes, age only equates to more experience fighting with jam jars and figuring out how to make dinner with a stuck jar no matter what stood in the way. Plus, older people are sometimes surprisingly strong.
How to check if a coil is working?
Check that your settings are optimum for the coil installed and ensure it hasn’t reached the end of its natural life. If it has, replace it. Make sure your battery is fully charged and take a slow steady draw. Check that the coil & tank are fully connected to the device and there’s nothing (pocket fluff, dust, dirt, e-liquid, ect) blocking the connection.
Why does my vape spit?
Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter the spitting issue if the liquid on the coil hasn't been atomized on time with low wattage.
Why does my e-liquid burn?
The thicker the e-liquid (higher VG percentage) and sweeter the e-liquid (higher sweetener content), the more likely it is to cause burnt flavor. We recommend using sweetener free e-liquid for best coil longevity. If possible, try a different e-liquid to see if the e-liquid you are originally using is the cause of the burnt flavor.
How to clean a button on a phone?
Please try clean the button of your device with a small amount of isopropyl alcohol and a compressed air canister if possible. Apply the alcohol around the edges of the button and let it stand for about 10 seconds before using compressed air to clean the alcohol off.
How to clean a sceptre?
Make sure the connectors at the bottom of the pod and inside the pod bay on the Sceptre are clean and free of condensation and e-liquid build up. Use a cotton swab or cleaning cloth gently soaked in isopropyl alcohol to clean these areas of your Sceptre. Let them air dry or blow on the areas gently after wiping with isopropyl alcohol before inserting your pod or activating your Sceptre.
What to do if you can't get your Innokin fix?
If you can't get it fixed on your own, then please kindly complete Replacement Merchandise Authorization (RMA) to submit an after sale claim on our website or contact [email protected]
What is the PG/VG ratio for e juice?
Please use thicker e-juice, We recommend using e-juice with PG:VG ratio between 50/50 and 30/70.
What do you do when you tinker with a vape?
When vaping, the usual stuff we do when we tinker with our mod and tank is cleaning, refilling, and changing the batteries.
How to prevent a stuck tank?
To prevent stuck tanks, make sure you don’t screw it on too tight, and you clean your mod and tank at least every week. Clean the part in between the mod and tank to be sure no e-juice gets stuck and dried. After all, an ounce of prevention is worth 10mls of cure. OZ Vapour Team.
What to wear to unscrew a tank?
2. Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How to clean a mech mod?
If you are using a mech mod, you can remove the batteries and soak the mod and tank in warm water mixed with vinegar. This helps clean off dried ejuice as well. Again, remove the batteries first before soaking.
How to unstuck a tank?
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
Can you tap a tank too hard?
However, be careful where you tap the tank. Be careful not to hit the glass tube or tap it too hard. We’re trying to fix a problem, not cause a new one. This isn’t a very effective method, but it does work sometimes in a pinch.
Can you unstuck a tank with a grip?
The added grip is usually enough to unstuck your tank. Simple but effective.
How to replace coil on Innokin Adept?
To replace the coil, first unscrew the tank from the body of the Innokin Adept. Next, unscrew the ring from the base of the tank: If there is a coil preinstalled that you need to remove, you can do so by lifting the coil with the edge of your finger or pulling up on the coil itself:
How to fill a vape tank?
Filling the tank involves three quick motions: #1 First, remove the drip tip. The drip tip is designed to hold the tank closed to prevent children from accessing the vape juice and also to keep the tank from accidentally opening in your purse or pocket. Just pull up on the d rip tip and it will pop out.
What is an Innokin Adept?
The Innokin Adept allows you to adjust the airflow, creating either a more airy vape with an easier draw or a tighter vape that requires more draw to pull the air through.
What happens if a coil is dry?
If your coil material is dry, you will get what is known as a "dry hit.". You'll know you got a dry hit because it tastes nasty, like singed fabric or burning rubber. Once you singe your coil, there's no going back and you'll have to toss it. For this reason, it's important to always remember to prime the coil first!
How many clicks does an e-cigarette have?
Most e-cigs come with a 5-click on/off feature, however, the Innokin Adept did something that seems like a small change but is actually very smart design. The Innokin Adept only requires 3-clicks to activate or deactivate it.
How to prime a wick?
To prime the coil, turn it upside down and drip 3 to 4 drops of e-juice into the coil. This will wet down the wick and prevent a dry hit.
How to contact Innokin Adept?
In addition, as always, we're just a phone call away if you need help. Call (844) 303-4545 or you can email us at: [email protected]
How to break vacuum tank when tank is 1/4 full?
When the tank gets down to 1/4 full, I twist the TOP cap 1/4 to 1/3 turn to break the vacuum, vape the rest, and have no problem taking the base off.
Does warm water loosen atomizers?
Virginia. Welcome to ECF, Warm water will loosen almost any tank, the only issue is that materials expand at different rates so you would have to bring the atomizer up slowly to avoid thermal stress. Once its warm then it should be easy to remove any stuck atomizer without any issues.
What does MTL mean in vaping?
For those who aren’t sure what these terminologies mean, Mouth-to-lung (MTL) is essentially the same as how most people drag on a cigarette. You suck the vape into your mouth and then inhale into your throat or lungs. People that MTL aren’t focused on generating huge clouds of vapour.
Where is the fill hole on a sceptre pod?
Sceptre pods are easy to fill, located on the side of the pod is a rubber tab, pull out the lift side of the tab to uncover a fill hole, not too big as to allow for leaking when filling but not too small that the nibs of your e-liquid bottles don’t fit.
How to see if a sceptre pod is connected?
Insert the sceptre pod into the device and a white LED light under the pod will shine through to show that the pod is securely connected, if you don’t see the light when inserting the pod, first make sure the textured grip bumps are on the open side of the device and the fill port on the closed side, or, if it is the correct way around make sure the base of the pod is fully secured on to the pod. This LED light can also help you see your juice levels in your pod easily.
How to activate boost mode on a sceptre?
Activate Boost Mode! – to activate the boost mode on either coil simple power off the Sceptre with 3 clicks, release and then hold the button, the LED cycles between normal (green) and Boost mode (purple). Boost mode creates more heat and vapour.
Can you vape mouth to lung?
It doesn’t matter if you vape Mouth to Lung or Direct to Lung, neither is ‘better’ than the other. There is a suggestion from some, that people should start with an MTL vape and then move on to, or ‘upgrade’, to a DTL vape. While I would always suggest starting with a MTL device (for no other reason than it’s closer to how most people smoke) there is no good reason to switch to DTL later unless you really want to, and if you like a bit of both in your day, with the Sceptre you can do both with the one device!
Does the Sceptre have flavor?
Let’s begin with flavor, the Sceptre is built with the ultimate vaping experience at heart, and for vapers, it has to be flavour! The key to great flavor is great coils. With the sceptre not only does the flavor come through quickly, it also comes through intensely! Enjoy your favourite e-liquid how it was intended to taste! The Sceptre also auto detects the coil in your pod and adjusts the wattage according to the coil to save your coil from burning out.