Start by connecting your first atomizer to your mod. Then, choose “ArcticFox Configuration” from NFE Toolbox’s initial screen. One of the profiles will already be active.
Full Answer
How to set up an arctic air machine?
Setting Up the Arctic Air Find a good location for your Arctic Air machine. Prepare the room with alternative cooling methods. Find the flip-open door on top of the device. Pour water into this tray area. Flip the door closed once you have filled this tray. Stay within a short distance of the device. Plug the device in with the USB cord.
Do I need to set the timer on my Arctic air?
This isn't mandatory, but it will help the Arctic Air create cooler air once you begin using it. Once you've filled the water tank, set a timer for 3 minutes. Once the 3 minutes are up, you can turn on the air cooler.
How to fix a disposable vape device that won’t turn on?
Add some e-liquid to the pod and reassemble the device. If your disposable vape has a fiber-based filler material inside, you’ll need to remove the filler material from the device and re-saturate it with e-liquid. When the filler is wet again, you can reassemble the device and resume vaping.
How do disposable vapes store their e-liquid?
Many disposable vapes store their e-liquid in a fabric-based filler material. As you vape, absorption causes the e-liquid on the outside of the fabric to move in toward the coil. If you’re chain vaping, though, you’re not giving the e-liquid a chance to absorb.
How to use Arctic Air evaporative air cooler?
To use an Arctic Air evaporative air cooler, start by opening the top of the device and filling the tray up to the top with water. With the water tray filled, plug the USB cord attached to the air cooler into a computer or laptop.
How to turn on Arctic Air Cooler?
Press the Power button to turn on the Arctic Air cooler. The Power button is a large round, gray button on the top of the air cooler. Once you press the Power button, it will light up blue to tell you that it's working. This is the same button you'll press to turn the air cooler off once you're finished using it.
How long does it take for an Arctic air filter to work?
Wait at least 3 minutes to let the filter absorb the water. This isn't mandatory, but it will help the Arctic Air create cooler air once you begin using it. Once you've filled the water tank, set a timer for 3 minutes. Once the 3 minutes are up, you can turn on the air cooler.
Where to put USB cable in Arctic Air Cooler?
Insert the smaller end of the USB cable into the back of the Arctic air cooler. The opposite end of the USB cable, which has the larger input, can go into a power adapter in a wall outlet, your computer's USB port, or any other power source with a USB plug.
How to change the color of the Arctic Air cooler?
Choose the color setting you want by pressing on the light button, which is to the right of the fan speed button . Keep pressing and releasing the light button to change from color to color.
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
Spain: Vape Industry Sues Government Over Anti-Vaping Campaign
" Last November, Spain’s Health Ministry launched an anti-vaping campaign which ignores all the scientific evidence in favour of vaping for smoking cessation and/or tobacco harm reduction. Moreover, the campaign makes a number of false claims such as blaming vaping for the EVALI outbreak and saying that vapour is carcinogenic.
Can we add a new rule?
I know people don't really pay attention to the side bar, rules, or stickies in general but can we add a rule for those that do? Something along the lines of:
Thank you mods!
I just wanted to publicly thank the mods for implementing our new no medical questions rule that I suggested a few days ago. Hopefully it cuts down on some of the clutter, questions we're not qualified to answer, and just dumb shit that's in no way related to vaping being blamed on vaping.
Can you use Arctic Fox on a Nuvoton?
You can only use ArcticFox on compatible devices that use the same Nuvoton chipset. Pay a visit to NFE Team’s site and check out the list at the bottom of the home page to see if ArcticFox is compatible with your device.
Does Arctic Fox have a mod?
ArcticFox supports different profiles for your atomizers. Many people use a single atomizer on their mod as their all-day, every-day setup. Some, though, and especially those who treat vaping as a hobby, may turn to different atomizers throughout the day. A Kayfun for MTL vaping at work breaks through the day, a CSMNT for huge clouds when back home in the evening.