How to use the pulsar APX V2 vaporizer?
How To Operate The Pulsar APX V2 The Pulsar APX V2 has an easy-to-use one-button operating system. You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.
What is the best APX vape V3?
Pulsar APX Wax V3 Concentrate Vaporizer has a rating of 4.8 stars based on 212 reviews. The new and improved APX Vape V3 combines portability with a maximized herb chamber to create an unmatched vaping experience.
What is the APX volt V3 variable voltage vaporizer for wax?
The APX VOLT V3 variable voltage vaporizer for wax features a 5-second heat time, 3.5 inch (8.89 cm) size, 1100mAh battery, 4 voltage settings (2.5V / 2.8V / 3.2V / 3.7V), pure quartz coil-less cup, 0.4ohm atomizer resistance, and low temp capability for enhanced terp flavor.
Is the APX smoker a vaporizer?
* The APX Smoker uses a combustion style heating element and is not a vaporizer. Need replacement atomizers? Get them here. Disclaimer Legal herbal use only, NOT for tobacco.
How do I clean my APX vape pen?
Pour enough isopropyl alcohol into a soaking container to cover the glass or metal mouthpiece.Place the mouthpiece in the container with isopropyl alcohol for one hour.Remove and wipe with a cleaning wipe.Rinse in cold water and dry with a hand towel or paper towel.
How do I use a APX 3?
How to useRemove the mouthpiece to expose the herb chamber, fill it with herb, and then replace the mouthpiece.Press the power button five times to turn on the device.Hold down the power button for three seconds to cycle through the temperature settings and release it once it lands on the setting you want.More items...
How long does APX vape last?
Pulsar APX 2 Portability and Vaping Capabilities The Pulsar APX 2 has pretty good battery life at around 90 minutes making it a portable option for most day trips. The battery is not replaceable though so you probably won't take it on longer trips where you'll be away from a charging base for more than the day.
How do Pulsar pens work?
1:263:26Pulsar Go Wax Pen Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse your wax tool to place a small amount of concentrate. Directly onto the coils drop in the tankMoreUse your wax tool to place a small amount of concentrate. Directly onto the coils drop in the tank replace the collar in mouthpiece. And you are all set to go.
How do you use APX vape oil?
0:122:17Pulsar APX Wax Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe Pulsar apx wax vaporizer does not have any type of temperature. Control simply press and holdMoreThe Pulsar apx wax vaporizer does not have any type of temperature. Control simply press and hold the power button until the light changes from red to green heating.
How does APX Volt work?
0:181:52Pulsar APX Volt Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd one packing tool to load your unit first remove the glass mouthpiece from the heating chamber toMoreAnd one packing tool to load your unit first remove the glass mouthpiece from the heating chamber to expose the coil this cup. Then place your preferred wax into the cup.
How do I know when my vape is done?
How To Tell When Your Disposable Vape Is EmptyThere's a nasty burnt taste to the vapour.#1 There is less vapour, and it is tasteless.#2 Your vape doesn't produce vapour anymore.
How do I know when my vape bowl is done?
At that temperature you will have extracted up to 85% of the essential oils. So to me, the easiest way to tell if you're done vaporizing is if you hit the max temperature on your vaporizer (or 235C) and you're not getting any more visible vapor. If you can't see or feel any vapor, there isn't any left to come out.
How long should a vape session last?
Generally, 15 to 30 seconds are enough before you take another hit, but you can wait longer, especially if you are experiencing dry hits more often. It can be hard to get used to, especially if you're previously a smoker which doesn't require you to wait for anything.
How do I clean my Pulsar APX wax?
0:321:54Pulsar APX 2 Cleaning Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor best care we recommend that you brush out your heating chamber after each use with a ZeusMoreFor best care we recommend that you brush out your heating chamber after each use with a Zeus bristle pipe cleaner this will help get out any extra particles.
How do you use a push button vape pen?
How to turn on/off a vape pen?Press the button rapidly 5 times.Notice the light on the button flashing.The battery is now activated, you can push and hold the button as you're inhale your vape.Rapidly click the button 5 times to turn the battery off.
How do you refill a vape pen?
Open System devicesUnscrew the mouthpiece and battery from the clearomiser.Place the nozzle on the inside wall, avoiding centre tubing.Squeeze to fill the clearomiser. ... Screw the mouthpiece and battery back onto the clearomiser.Take a few shorter drags to prime your device for the best vapour production.
How to know when it's time to vape Pulsar APX V2?
After 30 seconds, you’ll feel a vibration letting you know it’s time to vape.
How hot is Pulsar APX V2?
Here are the five temperatures you could choose from on your Pulsar APX V2: 356° F. 374° F . 392° F. 410° F. 428° F. Although it’s not required, Pulsar recommends pausing for at least five seconds in-between each inhale. This will give the unit plenty of time to re-heat for a smoother vaping experience.
How to change the temperature on a vaporizer?
To change the temperature setting on this vaporizer, hold the main button for about two seconds. Keep cycling through temp options until the one you want lights up on the LED screen.
How much herb can a Pulsar APX hold?
Yes, that’s all there is to it! The Pulsar APX V2’s ceramic chamber measures 10 x 16mm and can hold about 0.35 grams of dried herb. For the best results, Pulsar recommends loosely packing your herbs.
How to clean 510 threading on a vape?
Use the swab to wipe the inside of the coil chamber until clean. Unthread and remove the coil from the vape body. Use the cleaning swab to wipe the 510 threading of the vape body. Re-assemble vaporizer and dry-fire before use.
How to clean a vape coil?
Make sure the vape unit is turned off and the heating coil element is cool. Use an alcohol-filled cotton swab or lightly dip a dry cotton swab in 91% isopropyl alcohol. Use the swab to wipe the inside of the coil chamber until clean. Unthread and remove the coil from the vape body.
How to clean a vaporizer chamber?
The best way to clean the chamber is with an alcohol-filled cotton swab. These steps can be performed while the mouthpieces are soaking. Ensure vaporizer is turned off and fully cooled prior to cleaning. Snap the stem of the cotton swab to release the isopropyl alcohol into the cleaning tips. Alternatively dip a dry cotton swab into ...
How long to soak silicone mouthpiece?
Separate the silicone liner from the plastic mouthpiece and place them in the soaking container for one hour.
How long to dry fire a vaporizer?
Swirl the cotton swab tip around all surfaces of the heating chamber and surrounding areas to remove resin and other residues. Let the vaporizer sit for 3 minutes and then dry-fire by turning it on to the highest heat setting. The heat will evaporate any remaining alcohol residue.
How to clean a mouthpiece?
Place the mouthpiece in the container with isopropyl alcohol for one hour. Remove and wipe with a cleaning wipe. Rinse in cold water and dry with a hand towel or paper towel. Cleaning the coil chamber - These steps can be performed while the mouthpiece is soaking.
