- Prime before vaping. The first (and most overlooked) tip to increase coil life is to prime your coils before vaping. ...
- Avoid dry hits. Dry hits not only taste awful, like burnt toast or worse, but they’re horrible for your coils. ...
- Change your e-liquid. Some e-liquids tend to block coils and can cause more problems than others. ...
- Choose coils wisely. When purchasing e-cigarette coils it’s important to shop smart. ...
- Tips to clean vape coils. As with most maintenance items, if you take care of your coils and clean them properly, they will last longer and perform better.
Full Answer
How to make your vape coils last longer?
Take a few dry hits. Once your device has been appropriately filled, reassemble the tank and attach it to your battery. Take four to five dry hits, which is to say take a drag without activating your battery’s fire button. This allows the vape juice from the tank to siphon into the cotton of the wick. How do you make your vape coils last longer?
How to Prime your vape coils?
To get a long-lasting, premium vaping experience, you need to prime your coils every time you replace them. Out with the Old, In with the New. First, dispose of your old coil and screw your new one into place. This will allow you to grip the larger tank base during the next step. Saturate the Wicking Material.
How to fix a vape that won’t heat up?
Repeat the heating process: Allow your coils to cool for four or five seconds and then fire them again. This process causes your coils to expand and contract to ensure that they get completely clean before you add e-liquid back into the equation. Rebuild your vape: Fill your tank up and get back to vaping normally.
How to attach coils to vaporizer?
Attach coils to vaporizer: Put your coils in place and press your firing button until they heat up completely. Just like building your coils for the first time, make sure that they heat evenly across all of the wraps. Look for signs that there is anything heating unevenly and make sure it is clean and dry.
How can I make my vape coil last longer?
5 Tips to Make Your Coils Last LongerPRIIME YOUR COILS. When you first install a new coil, it's important to completely soak the wick with e-liquid. ... USE HIGH-QUALITY E-LIQUIDS. ... REGULARLY CLEAN YOUR COILS. ... USE E-LIQUIDS WITH A HIGHER PG CONTENT. ... KEEP YOUR TANK FILLED.
How long should a coil last in a vape?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
Why does my vape coil burn so quickly?
Sub-ohm coils heat up much quicker than those with a higher resistance. If your e-liquid has a thinner consistency then the atomizer head can vaporize it too quickly, causing premature burning.
Do coils last longer at lower watts?
Choose a lower wattage Lowering your wattage will also place less strain on your coil as well and help extend its lifespan.
Can I rinse my vape coil with water?
Letting dirty coils soak and having water pass through them will remove some of the residue, but not all of it. And on top of that, you will need to wait for water to fully evaporate, which may take a while. If you still want to clean your coil heads, then you can follow the old soak and rinse method.
Does airflow affect coil life?
Airflow doesn't affect coil life, either. The things that tend to shorten the life of a coil are poor wicking (we have some advice on wicking here), and/or flooding your coil. Over time, if you vape on a flooded coil, you will get a much faster build-up of gunk which will eventually ruin the coil.
Why is my coil burnt after 2 days?
That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.
Why does my coil burn out after 2 days?
You're Not Priming New Coils When You Install Them Coil gunk is the most common reason why vape coils burn out, and that's a good thing because it's completely fixable through cleaning – there's no real damage to the coil.
How long should I wait between vape hits?
15 to 30 secondsDon't Chain Vape You must let your wicks saturate to reduce the possibility of a dry hit. The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait. In this case, you can buy e-juice with a higher nicotine level.
Does chain vaping burnt coil?
This shouldn't be needed (since you already soaked the wick), but if you don't prime your coil properly the whole thing can get ruined, so it's worth being absolutely sure. “Chain vaping” – just vaping and vaping continuously until you can't see your e-cig for all the clouds – can lead to a burnt wick too.
What is the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
How Long Do Vape Coils Last?
How you vape and how well you treat your coils can significantly extend their lifespan. Generally, new coils last between one to two weeks, but tha...
Properly Breaking in A New Vape Coil For Longevity
You’ll notice it’s time to replace your vape coil once you start experiencing a burnt taste with use. Too many people think this replacement proces...
Make Your Coils Last Longer With These Good Vaping Practices
How do you make your vape coils last longer? Follow our recommended tips & suggestions listed below:shop coils today
Learn Proper Vape Maintenance With Vaporfi
To learn more about the proper care and maintenance of your vaporizer tools, visit our blog regularly. And when your coils finally do run their cou...
How to keep your pen coils fresh?
The biggest thing you can do to keep your coils fresh is to clean them. This is a little bit tedious, but it’s an important step to take. When you don’t clean your coils, the old juice from your tank clings to the coil, congeals, and eventually comes out of your pen as a horrible burnt taste. Ewww! Not to mention all that build up weakens the metal of your coil, causing it to degrade faster — which is what we are trying to prevent.
Is vaping a simple process?
While vaping is a fairly simple process, there are still a couple of techniques that bear emphasizing when you are looking to get the most possible use out of your vape coils.
How does a vape coil work?
A vape coil becomes extremely hot, extremely quickly. A cotton wick is wrapped around the coil, and the coil almost instantly vaporizes all of the e-liquid held in the wick. New e-liquid needs to flow from the tank to the wick, thus keeping the wick wet. If that fails to happen, the wick dries out – and dry cotton burns in a fraction of a second. ...
How do you know if a vape coil is dry?
Through the openings, you’ll see cotton. When you vape, your coil’s cotton wick becomes dry and replenishes itself by absorbing vape juice through those holes.
What is the difference between VG and PG in vape juice?
That’s because VG is much thicker than PG.
What happens if you vape until your tank is empty?
If you vape until your tank is nearly empty, in other words, you’ll reach a point at which the level of e-liquid in the tank is below the wick openings. At that point, the wick is no longer replenishing itself as efficiently as it should. If you try to use your tank until it is completely dry, you’ll risk burning the wick.
What is coil gunk?
Coil gunk is residue that collects on your coil as you vape. Although almost all of the flavoring ingredients used in e-liquid have the potential of creating residue, sucralose is by far the biggest contributor to coil gunk because, unlike most vape juice ingredients, it doesn’t vaporize fully. When you apply heat to sucralose, it caramelizes and burns. It becomes very sticky – almost like burning sugar – and creates a thick coating on your atomizer coil. The coating grows thicker and thicker until vaping becomes unbearable, and at that point, you have no choice but to replace the coil.
Why is coil gunk so bad?
The first reason is that the vast majority of e-liquids nowadays contain sucralose. E-liquids are sweeter than ever, so they create more coil gunk than ever. The second reason is that today’s vape coils are more powerful than ever.
Can you vaporize e-liquid with a high wattage?
If you operate your vaping device at a high wattage, though, the coil will vaporize the e-liquid in the wick almost instantly. The wick will dry out more quickly than it can replenish itself. If you prefer short, quick puffs, that may not be a problem.
How long do vape coils last?
How you vape and how well you treat your coils can significantly extend their lifespan. Generally, new coils last between one to two weeks, but that can be extended if you properly break-in new coils when you get them and practice good care and maintenance procedures during and between usages.
How to attach coils to a vaporizer?
Attach coils to vaporizer: Put your coils in place and press your firing button until they heat up completely. Just like building your coils for the first time, make sure that they heat evenly across all of the wraps. Look for signs that there is anything heating unevenly and make sure it is clean and dry.
Why does my vape get burnt?
Instead, because there’s no juice to heat, the coils heat the wicking material which will cause the material to be used up faster and produce a less than desirable vaping experience. You can avoid this by:
Why do coils need to cool down?
Your coil needs to cool down and absorb more e-liquid before it is ready to produce more vapor. If you are firing too quickly, you could be leaving your coils dry between hits without even realizing it. Don’t run your tank empty. Letting your tank drain all the way to the bottom before you refill is asking for trouble.
How to clean coils?
Rinse the coil under hot running water: Hot water will wash away any leftover debris or liquid that was sticking to the sides. Shake out the water: Gently shake out any water that is sitting between the coil wraps and then let your coils air dry on top of a paper towel or other absorbent material.
How many dry hits does a vape tank take?
Once your device has been appropriately filled, reassemble the tank and attach it to your battery. Take four to five dry hits, which is to say take a drag without activating your battery’s fire button. This allows the vape juice from the tank to siphon into the cotton of the wick.
What is priming coils?
Priming your coils is like the break-in period for a new car. It lets the coils settle into their normal operating conditions before you add e-liquid. Avoid over-pressing the firing button. Use the puff timer tools on your vaporizer to learn when to hold and release the firing button.
What are the common mistakes that new vapers make when buying coils?
One of the most common mistakes new vapers make when buying coils is forgetting to double-check the resistance level. Most coils are offered in at least a few resistance level choices, so you can choose accordingly to suit your preferred experience.
How many watts should I use to vape?
There are very few scenarios in which any vaper would need to regularly vape at 200 watts or more – that would be like pushing your car to 200 MPH every time you drove. A good vape session typically clocks in between 55 to 80 watts, producing an excellent amount of vapor without putting unnecessary demands on your coils and device.
What happens when you burn your vape?
A burnt or dry hit is what happens when your device runs low on e-liquid, causing the coils to heat up the wicks rather than vape juice. If you’re taking burnt or dry hits, you’ll burn through your wicking materials (and coils) at a much faster rate. Instead, utilize your device’s puff timer to aim for three to five seconds between every hit. Also, get into the habit of refilling your vape tank once it’s about three-quarters empty.
Why is my vapor output so low?
Although low vapor production can also be caused by a dying battery , an old coil is the most common reason.
Is it possible to find coils that are compatible?
While it’s not impossible to find coils that are compatible across brands, it’s not typically the best choice. Generally, vape device manufacturers specifically engineer coils that are compatible with their devices, designed to maximize performance and produce the best possible experience.
Can you extend the lifespan of a vape coil?
You can do everything possible to extend the lifespan of your vape coils – but it doesn’t matter much if you’re starting with low-quality products. Make the most of your vape experience with the best vape coils in the industry, all collected in one easy-to-shop place right here at VaporFi.
