how to make your vape tank leak less

1. Fill Your Tank Up The Right Way. The most common cause for a leaky tank is tied to beginner vapers not knowing how to do it the right way.
2. Keep the Tank Vertical at All Times. Whenever you’re not using your vape, you should ensure that it’s left in an upright position. ...
3. Tighten Everything After Refills. Although vape tanks were designed to be opened up and closed again on a pretty regular basis, that’s not to say that there won’t be ...
4. Avoid Over-Tightening. As bad as not tightening everything during reassembly is, over-tightening can actually cause even more issues and lead to leaking.
Check and Replace O-Rings If Needed. It’s not only over-tightening that can damage the o-rings – they can also be damaged by vape juice or wear out after some ...
Use Coils That Fit Your Style of Vaping. There are two types of vapers out there – mouth to lung vapers and direct to lung vapers. ...
Close Airflow When Refilling. Ok, this one is a bit of an urban myth as I can’t find anything that proves that closing the airflow while refilling can prevent ...
Take Slow and Soft Inhales. Depending on your inhalation style, you might be causing your tank to leak all by yourself. ...
Increase the Wattage. It’s pretty obvious by now that most leaking problems are caused by flooding the coil. ...
Clean Your Vape Tank Regularly. A dirty vape tank will definitely be prone to all sorts of complications, including being much more likely to leak.

Full Answer

How to stop your vape tank from leaking?

Sep 29, 2021 · Now, even though some believe that it’s just how things are with vape, this doesn’t have to be an issue, and you should know that there are things to do to prevent your vape tank from leaking. 1. Avoid overfilling. E-liquids can be sticky, and they can create a mess once they leak from the tank, and one of the best ways to prevent it is to ...

Is your vape pen leaking juice?

If the tank is stored like this for any prolonged period of time, the juices tend to leak from any air holes in the device. To safeguard against this problem, always keep your tank stored "standing up" so as to avoid horizontal positioning. Defects from Manufacturer Of course, the problem could always be something less clearcut.

Are You tightening your vape tank too much?

May 16, 2019 · Another common leakage issue is how much you are tightening your tank. You'll need to unscrew your vape when you fill it with Max VG eLiquid, change the coil, or clean it out. When you put it back together, you want to ensure it's tight enough that the rubber rings on your vape create a seal against leaks.

What is the best leak proof vape tank?

Make sure the seals and o-rings are snug If you’re still experience leaks, it’s time to check out the tank to make sure all the seals are lined up and tightened and that the O-rings and tank exterior are not damaged. A loose joint can make for some quick e …

How to keep vape juice in tank?

When your tank is half-filled (or less), some of the “juice holes” within the coil are positioned out of the liquid. As a result, vape juice can more easily seek out through these holes, leaking into the central tube or completely escaping through your device’s airflow holes.

Why is my vape tank leaking?

Flooding is a common cause of leaky tanks, occurring when the coil receives more vape juice that it can effectively vaporize. The excess e-juice has nowhere to go but out, leaking through the housing and causing a frustrating mess. However, increasing your voltage or power setting can help your device vaporize more e-liquid with each puff, so your coil will be able to do a better job of keeping up. Making this switch will also intensify vapor production, as well as highlight different flavor elements in your e-juice. If that’s not optimal for your vape experience, you can always opt for a different solution: extra wicking material.

What is a vape machine?

A vape is a finely-tuned machine, one that requires all its parts to be properly assembled in order to work its magic and create that deliciously fluffy vapor you love. If even one of the various components of a vape isn’t screwed on correctly, the resulting gap can lead to a leak.

Can overtightening cause vape leaks?

However, overtightening can actually cause the leaks you’re trying so hard to avoid, as well as leave you with damaged vape parts.

Can you eliminate condensation from vaping?

Condensation is a normal byproduct of vaping, and one that you can’t completely eliminate. However, you can help minimize condensation by making a few small shifts in your vape habits:

Is PG juice thinner than VG?

As we mentioned earlier in the guide, higher-PG juices are considerably thinner than their higher-VG counterparts. Sometimes, cutting down on leaks is as easy as swapping out your vape juice for one with a higher VG ratio. The thicker consistency will slow down the rate at which the liquid is pulled into the coil, which will help you avoid flooding and the resulting leaks – that’s a win-win.

Why does my vape tank leak?

Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

Why do multi strand coils pop?

Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.

What happens if you inhale too much liquid?

If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.

Why does my tank leak out of the airflow holes?

Put a lid on it – If you leave a tank without the top cap, it will leak out of the airflow holes. That’s due to the pressurized nature of tanks. Make sure that your tank is empty if you plan on leaving your top cap off for extended periods of time—anything longer than it takes to fill it.

What does it mean when a juice tank is not airtight?

Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.

How to prevent juice from leaking?

Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.

How to stop ejuice from leaking?

A neat little trick to prevent leaking is to close your airflow when filling. With certain tanks, ejuice will try to escape when you close the top cap. If your airflow holes are open, this is the only possible exit and ejuice will start to leak.

Why does my ejuice leak out of my tank?

If you pull too hard when inhaling then this can cause your coil to pull in more ejuice than it can handle . This will flood the coil and cause the excess ejuice to leak out of the tank. Try inhaling more lightly when you go to take a puff.

Why do I need o rings in my e juice tank?

The o-rings on a tank serve to seal together all of the different parts. If your o-rings are ripped or damaged this allows e-juice to go where it’s not supposed to and will cause leaking. Even if you’ve never dropped or messed with your tank, o-rings can still get weak and fail overtime.

What is a versed vaper?

The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!

What happens if you fill your e-juice tank incorrectly?

There are specific places where the e-juice should be placed. If you are filling your tank incorrectly, you might find yourself wasting your precious liquid. Check your owner’s manual to ensure you are filling it correctly.

Why is my atomizer not vaporizing?

If you’re vaping at a wattage that is too low for your setup, the atomizer might not be able to vaporize the liquid fast enough. Try turning up the wattage in small increments until you find your ‘sweet spot’. Turning up the power too fast can lead to dry hits, or cause your coil to burn out.

What to do if your plastic tank is cracked?

If you’re using a plastic tank, be cautious of these flavors. If your tank is cracked, replace it immediately. Sometimes you can simply buy a replacement tube, while other tanks will need to be re-purchased.

What happens if you insert too much eliquid?

If you insert too much eliquid, it will need a place to escape. This very well may be on your hands or in your pocket. Leave a little bit of room in your tank while re-filling. Sure, you may need to refill a little sooner, but that’s better than dealing with a leaky tank. Nobody enjoys sticky hands!

What do you do if your O rings are worn down?

Many setups come with spare o-rings (the little plastic circles that keep everything together). If these become damaged or worn down, simply replace it with a spare and this should help stop any leaks.

Can a plastic tank break?

While tanks are great at what they do, they can, and do, break. Closely inspect your tank to ensure there are no cracks or holes. Cracks can happen for a number of reasons. Glass tanks can be dropped. Plastic tanks can become damaged by certain E Juice (think citrusy flavors). If you’re using a plastic tank, be cautious of these flavors.

Should I put my tank upright or on its side?

As much as you might love throwing your setup into your bag while you’re out and about, you should try keeping it standing upright. If your tank is laying on its side, it is more likely to leak. Also, this could lead to our next point.

Common vaping problems

It is just one basic example of how we can all do better health-wise. If we add some nasty habits, like smoking, to all of this, coughing and not being able to get rid of that unique smell of cigarettes from our clothes becomes a part of our everyday life.

1. Avoid overfilling

E-liquids can be sticky, and they can create a mess once they leak from the tank, and one of the best ways to prevent it is to avoid filling it to the top.

2. Check power settings

Some of the e-cigarettes give us an option to change the power settings and decide how much of it our e-cig will use for its operating. Although there is usually some range, and it is up to us to choose if we want to set it to the maximum or minimum, the best solution is to set it to the optimum range.

3. Check the e-juice

You have probably heard of PG and VG, but many are still unaware of what they really represent. PG stands for Propylene glycol and VG for Vegetable glycerine, and the mix of these two liquids creates the vape juice. Now, depending on how much power your coil head requires, you want to get a lower or higher VG percentage.

4. Make sure that O-rings are still in a good shape

Experienced vapers probably know what O-rings are, but we will explain it further for those new to it. O-rings are tiny seals made of rubber that can be found on the bottom or top of our vape tank, and their role is to, yes, you guessed it right, seal it.

5. Avoid leaving e-cigarette on its side

The looks should be enough to settle this, but if you bought the e-cigarette, it is impossible not to notice a flat base on it, and it is not just because of aesthetic reasons. Yes, the aesthetics is one reason, but most of these devices are not made to lie on their side for long periods but upright, and their flat base allows them to do that.

To summarize

These tips mentioned above should come more than handy in preventing your vape tank from leaking, but, like with most things, it all starts from the device itself. Namely, there are vape tanks on the market where leaking is simply not possible, which is why doing some research before buying one should be on your to-do list.

Why Is My Vape Pen Leaking?

"Why does my vape leak?" It's a question that's come up in vaping households across the country for years. These leaks are frustrating to deal with. They get liquid everywhere, it discourages you from using your device, and who knows where to even go to get it fixed?

Filling You Tank With Vape Juice

While you might not expect it, the most common cause of vape tanks leaking is user incorrectly refilling the tank. So, let's break down the best way to use your device so you can avoid having to ask "Why is my vape leaking?" ever again. Not to mention, no one likes to waste excellent Vape Liquids due to a leaky tank!

Damage to the Tank O Rings

Another issue that might cause a vape tank leak is damage to the O-ring. These rings are typically made from rubber and can be found at both the top and bottom of the tank.

Laying Tanks Horizontal for extended period of time

Our third problem is also extremely common. When storing or transporting your device, take care that it doesn't spend too much time horizontal. This has been shown to cause these devices to leak, if not immediately then certainly over time.

Defects from Manufacturer

Of course, the problem could always be something less clearcut. Coils may come off the production line with certain defects built into them before you ever buy them. Alternatively, the coil might be old and in need of replacement. Either way, the result is the same: juice that doesn't wick properly through the system.

Maintenance & Cleaning Your Vape Tank

Last on our list is the issue of maintenance. Like any other electronic device that sees a lot of action, it's advisable to maintain your vape. This is especially true for the tank.

Stop Vape Tank Leaking In Its Tracks

Vape tank leaking can be difficult to pinpoint and even more difficult to fix, especially if you don't know what to look for. Luckily enough, there are many solid fixes out there that don't take an advanced background in repair work to get right. Hopefully, we've been able to give you some insite into fixing a leaky vape tank.

What happens if you overfill a vape tank?

If you overfill, the liquid will seep into other areas of the tank and seep out. You shouldn't fill your tank all the way up, either. Your vape needs that gap of air to create pressure in the tank, giving you a better vaping experience. Check out the manufacturer's recommendations for how much to fill the tank and stick to it.

How strong are e-cigarette tanks?

E-cigarette tanks are pretty strong, but they aren't invincible. They are mostly made of glass, which means there is always a chance they could get broken or cracked. Most vapers use their e-cigarettes all day long, meaning the device journeys from car to the office and back home again. They might get shoved in a pocket or tossed on a desk. So it's no wonder that damage happens to the tank occasionally. If you start to experience leaks, hold your vape up to a light and examine the tank closely. The light will make it easier to see hairline cracks or chips in the edges that could be causing the leaks. If you see any signs of damage, order a replacement tank right away (and consider investing in a carrying case for your vape!).

How to keep eliquid from getting into chimney?

The easiest way to prevent your eLiquid from getting into the chimney is to make sure you don't overfill the tank. You should also take care in how you fill the tank. Take your Max VG liquid and tilt the tank, squeezing the e-juice down the side then slowly tilting it back up.

What are vape o-rings made of?

Most vapes have o-rings made from a rubber material. The rubber can get brittle and dry with age. If you've had your vape for a while, it's worth checking on the quality of the o-rings if you are suddenly experiencing leaks. The o-rings should be firm but pliable.

Why is VG liquid thicker than other liquids?

Because of the thicker consistency, they are less likely to leak than liquids made from other bases.

Why do I have to twist my e-cigarette?

That's because overtightening can cause damage to the o-rings, or rubber rings, that create the seal. If you damage those, it's very easy for liquid to come out. So give your e-cigarette a tight twist to ensure it's closed, but don't twist it as hard as you possibly can.

Where is the liquid in a vape?

There is vape liquid in the chimney. The chimney of your e-cigarette is the hollow tube in the middle of your tank. If liquid gets into this area, it can cause some minor (but annoying) problems like spitting, popping, and leaking. The easiest way to prevent your eLiquid from getting into the chimney is to make sure you don't overfill the tank.

Why is My Vape Tank Leaking?

Before we take a deep dive into the best leak-proof vape tanks, let’s take a look at some of the reasons why your current tank might be leaking in the first place:

Leak Proof Vaping Tanks

Hopefully, we’ve been able to help you with any of your vape tank leak issues or steer you in the direction of some of the best vape tanks on the market to prevent leak issues.