How to Prevent Vape Popping
- Don’t Prime the Coil Excessively. When you prime the coil, you don’t have to soak the wick. Drop just enough e-juice on it to get it wet.
- Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard.
- Keep Your Device Clean. A clean device will keep grime and residue from building up inside your device. You should take it apart and clean it completely once a month.
What causes vape popping and how to fix it?
What causes vape popping. A light crackling pop noise is a completely predictable and usual process. This is an e-juice being heated by the coil and vaporizing, and it means a good sign that your e-cig works properly. When you vape, your e-liquid hits a very hot coil and turns it into a vapor. This reaction makes you hear a crackling noise.
How do I Stop my vape coil from spitting and popping?
Here are some ways to prevent spitting and popping from occurring. Don’t over-prime your coil – “Priming” your coil is the process of manually dripping e-juice onto the wicks before you first use it. If you put too much e-juice in the chamber, you can easily cause flooding issues and spitback.
How do I Stop my vape from flooding?
Reduce your airflow – Inhaling too forcefully when you vape encourages flooding by literally pulling more e-juice into the chamber. This is easy to solve: inhale more softly, letting the coil and wicking do the work for you. If you’re still having issues, try reducing your airflow setting.
How to stop your vape device from making noise?
Avoid this by increasing the device’s wattage. Consider vaping at a higher wattage and see if the noises are still the same. Moreover, try to change the airflow adjustments to reduce the amount of e-liquid. Twist the collar of your sub-ohm tank to loose some air pressure.
Why does my vape pop?
The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.
How to get e-liquid into your mouth?
Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard. Let the coil and the wick heat the liquid. Inhale gently. You’ll take in pure vapor and have a more enjoyable, flavorful vape.
How to clean e juice from chimney?
Here, the solution is simple. Remove your drip tip. Roll up some tissue paper, insert it into the tank and soak up the excess water. Regular cleaning will help you avoid this problem.
Can you use pod mods at low temperatures?
If you’re using a pod mod or another small device, you’re using lower temperatures. Your small device will work better with a thinner liquid that heats quickly at low temperatures. If you’re having trouble with popping, try switching to an e-juice that contains some VG.
Get a Tank With a Mesh Coil
When you take a high-gauge wire and twist it into a coil, the side of the coil has a ribbed shape. That’s what creates the valleys where e-liquid starts to collect. Now, instead of making a coil out of round wire, imagine if you could use a strip from a metal window screen as your coil’s heating surface.
Use a Thicker E-Liquid
If your tank pops because pools of e-liquid are forming between the coil and the wick, there’s also a fairly simple solution for that: You can use a thicker e-liquid.
Use an Anti-Spitback Drip Tip
Did you know that most vape tanks work with drip tips made by other companies? Most vape tanks uses a standard mouthpiece called an “810 drip tip.” If your tank uses that design, then there are hundreds of aftermarket drip tips that you can buy and install. The specific type of drip tip that you want to search for is an anti-spitback 810 drip tip.
Avoid Using Clapton Coils and Other Elaborate Coil Designs
As we’ve already mentioned, the best thing that you can do to prevent your vape tank from popping is to buy a new tank with a mesh coil. Let’s suppose, though, that a new tank simply isn’t in your budget right now, and the tank that you’re currently using doesn’t have a mesh coil available.
Learn How To Fix a Popping Vape
When you turn on your vape, the occasional popping sound is to be expected. For example, you may notice a soft crackling as your vape heats up. This is perfectly normal and is usually attributed to the e-liquid, which is changing into a vapor. You know how boiling water crackles? It’s a similar scenario.
Coil Design
If you’ve got a popping vape, your coil may be the culprit. Coils come in a variety of sizes and shapes, some of which are more prone to trapping vape juice than others. For example, twisted and braided coils usually have crevices in which e-juice can gather and “cook.” When it heats up, these pockets may produce a popping sound.
E-Liquid Choice
Is the intensity of the popping inconsistent? If you find your device pops during some uses and not during others, it may not be an issue with the vape. Instead, it may have something to do with the e-liquid you’re using.
Replaced RTA Parts
Many vapers enjoy customizing their devices to achieve the perfect experience. If you’ve built your vape from scratch or if you’ve replaced any parts, you may have more intense sounds. This stems from how the pieces fit together, as e-juice can get into spaces between the coils and tank if pieces aren’t flush.
Condensing Vapor
The problem may not be in coils at all. If you have a narrow drip tip, vapor can condense along the inside, leading to warm a coat of vape juice that may pop as you inhale. This is also a common cause of spit back, as you may inhale this condensed e-liquid. Fortunately, you can solve this issue by installing a wider drip tip.
Vaping Technique
Popping isn’t always caused by a device issue; how you vape can intensify the sounds. If you’ve checked for the above causes and haven’t found any problems, you may need to alter your vaping technique.
Why does my vape keep popping?
We are talking about occasional popping because of twisted coil build, and you can hardly prevent it. Be sure that your coil twists and braids are very tight in your device. You can also hear a vape popping when your device has a narrow drip tip or chimney.
Why does my vape make a noise?
More e-liquid will condensate and less turn to vapor, thus an excess of liquid makes the noise. E-liquid can’t be vaporized effectively when your vape wattage is too low. You need to increase it for normal heating or try to make longer draws. Otherwise, you may flood your atomizer and e-juice will spit into your mouth.
Why does my vape spit?
Vapes spit because juice collects on the coil and does not vaporize. This problem is caused by coils getting flooded with too much liquid, low wattage settings, and airflow that is too open, and a variety of other reasons.
Why does my RDA tank spit?
Overpriming. A common cause of a tank or RDA spitting is overpriming. Priming coils is essential, but some people overdo it and put too much liquid onto the coil and wicking. Instead, use a moderate amount to prime the coil.
Why do coils pop?
A Coil Design. Twisted and braided coils have more surface area, which helps to produce more vapor and may cause extra popping sounds . Such types of coils have more crannies and nooks, that’s why more e-liquid pops. We are talking about occasional popping because of twisted coil build, and you can hardly prevent it.
Why does my atomizer pop?
A thinner e-liquid might cause coil flooding and atomizer’s popping and spitting. You may use thicker vegetable glycerin instead of thinner propylene glycol liquid. Sugar is very much like wood when it is burned. Both contain cellulose which breaks down when burnt. Then the gases vaporize and make a popping sound.
Why do coils get flooded?
Deep drags are another reason why coils get flooded. Luckily, this problem is easy to solve. Just take slower and shallower drags. The airflow can be tightened, but the drags still need to be shallower because deep drags will flood the coil regardless of the airflow setting.
How to fix vape spitting?
This excess liquid stores in the tank’s center post or in the mouthpiece. It runs down to the center of the coil and causes spitback. To fix vape spitting, take small cotton and roll it up.
How to get rid of excess liquid in vape tank?
Often while filling the tank, the tank might get overfilled. Using a vaping syringe will help get rid of the excess liquid. It’s also a good idea to flip the vape tank either over a sink or some tissue. The excess liquid will fly out of your mouthpiece.
Why does my O-ring leak?
Thus, missing O-rings can cause leakage as well. Spitting often makes a popping sound. Spitting happens mainly because of oversaturation or coil flooding. In the process of heating, if the small liquid droplets fall on the coil, it can shoot in different directions.
Why does my vape leak?
However, a vaper must know that the wrong vape tank assembment can cause leakage as well. Malfunction or manufacturer’s defect can also be a reason behind the spitting. Often, leakage comes out from the airflow inlets. Positioning the coil incorrectly can also cause leakage.
What is it called when you vape a lot of liquid?
Excess e-liquid coming out through the mouthpiece and into the vapers’ mouth is known as vape spitting. Spitback is recognizable as the liquid directly coming to the mouth. Both the nicotine and the artificial flavors leave a strong sensation on the mouth. With vaping at high wattage, the warm liquid may make you feel uncomfortable.
Why does vaping make you feel uncomfortable?
With vaping at high wattage, the warm liquid may make you feel uncomfortable. Oversaturation of the coil and flooding cause spitting. While firing the device, the vapor comes up through the flooded juice. It makes the liquid spit and jumps up the chimney through the mouthpiece.
Why does my coil spit?
If you fire the coil at lower power than designed for, it may struggle to vaporize the liquid causing spitting. To ensure the best output from the coil, one needs to turn up the power. However, do not turn up too high that may burn the coil, its best to use the recommended wattage or you can Increase the power slowly to reach the optimum level of performance.
How to stop e-liquid from popping?
You can often prevent an atomizer that’s popping and spitting by simply using a wide bore drip tip. Since e-liquid can’t condense and form droplets inside the bore of the drip tip, it falls back to the coil.
What is a drip tip for vaping?
Have you ever wondered what those funny looking swiveling drip tips are for? Now you know. If an atomizer is spitting, the droplets hit the bend in the drip tip instead of going into your mouth. A very long drip tip can alleviate atomizer spitting, too. If your vaping setup doesn’t allow you to prevent spitting, you can at least keep the e-liquid out of your mouth.
How to prevent e-cigarette from spitting?
In this case, you can prevent the atomizer from spitting by increasing your e-cigarette’s wattage so it vaporizes the e-liquid more efficiently.
What happens if you put too much e-liquid in your mouth?
If too much e-liquid center chamber, the coils will flood and the atomizer will begin popping and spitting. Since an RTA also has a chimney leading directly to the mouthpiece, you’ll most likely end up with e-liquid in your mouth as well.
Why does my atomizer pop?
Twisted coils are known to cause quite a bit of atomizer popping and spitting. If you have a tank or RBA with a twisted coil, braided coil, Clapton coil or anything of the sort, it may be difficult to avoid a bit of occasional spitting.
How to get a pipe screen for a tank?
Simply get a pipe screen, cut it to fit the size of your tank’s drip tip or chimney and push it somewhere below the opening of the drip tip. Remember, though, that pipe screens are metal and could be conductive. Don’t push the screen down so far that it touches the atomizer coil.
What do you use to keep e-liquid in a sub-ohm tank?
If you have a sub-ohm tank or RTA, it most likely uses several threaded joints and o-rings to keep the e-liquid inside the tank. That isn’t all they do, though; they also keep the e-liquid out of the atomizer enclosure. Check your tank carefully to confirm that all of the o-rings are in place and not stretched out.
