- Place the cooking pot on the direct center of the burner and pour the VG (or PG) solution into the pot. ...
- Set heat to “2” or “slightly higher than low, but no where near medium heat” and set the timer to 30 minutes.
- After the timer, attend the pot, gently stir with the fork to ensure all marijuana is evenly distributed throughout the oil. ...
- After the timer, attend the pot again, gently stir with the for and ensure the marijuana is evenly distributed throughout the oil. ...
- After the timer, attend the pot for a third time, gently stirring and assessing the situation. ...
- After the timer, attend and gently stir the pot. Clean up any oil or weed ingredients which are lingering around, they will not be needed anymore. ...
- After the timer, attend the pot, and gently stir, this solution is technically done, but there is still some control over the potency of the solution. ...
- For a stronger solution, more time may be required to “wear down” the oil, compounding the resulting liquid that remains, to however little is desired (some people, depending ...
- No matter whether it was chosen to stop at Step 7 or Step 8, bottling the resulting THC juice is still the same: in the amber or dark ...
How to make THC vape juice?
Most of these processes involve the extraction of the THC oil from cannabis bud and then mixing with the carrier liquid – like vegetable glycerin (VG), propylene glycol (PG) and some other kinds of wax liquidizer. The method we will discuss here on how to make THC vape juice is a simple method that anyone can implement.
How to make high quality PG/VG vape weed?
Add the cannabis mix in the jar to the water in the pot and heat to about 180℉ (85℃). Once the desired temperature had been reached, it is essential to maintain it at that level without going above it. This is important to allow the THC to fuse with your PG/VG mix and still retain its high quality.
Can you make weed vape juice with vegetable glycerin?
If you’re using vegetable glycerin to make your own vape juice, avoid using any sweetener. You don’t need stevia or anything that resembles these substances. VG is the best natural sweetener for weed vape juice. 5. Let it darken
Can you use marijuana juice with a vape mod?
Using marijuana juice with a vape mod is very easy. The juice gets loaded the same exact way. However, the settings are a little different than nicotine vape juices. THC vapes best at 365-405 degress Fahrenheit, which also works best with 3.2-4.6 voltage and room temperature resistance.
How to make THC e juice?
Most of these processes involve the extraction of the THC oil from cannabis bud and then mixing with the carrier liquid – like vegetable glycerin (VG), propylene glycol (PG) and some other kinds of wax liquidizer.
What strain of vape juice is best for CBD?
If you want to make CBD vape juice, you might want to start with a strain with high C BD and low TH C; strains like ACDC, Canatonic, or Harlequin. CBD e juice is preferred by users who do not want to feel the high effects derived from using THC. On the other hand, if your goal is to get high, then you might want to go for a strain with ...
How to heat up a pot of cannabis?
Ensure there is enough of the mix to cover all of the cannabis buds. Pour water into a bigger pot, and also add water to a second pot before placing in the big pot. Place the pot on the stovetop and heat until you reach a temperature of 220℉ (105℃). This is where access to an accurate thermometer would be very useful.
How long to leave PG in oven?
Leave the cannabis in the oven for about 40 minutes, remove and allow it to cool (The decarboxylation process is essential in the conversion of THCa to THC)
How to make a VG bud?
Preheat the oven to 250℉ (121℃). Next, grind the cannabis buds. It is better if the grind is fairly uniform. Get a baking tray and spread your ground cannabis across it evenly. Then cover the entire mass with foil. Once the oven is heated, pop the baking tray in. The next step involves the PG/VG.
How long does it take to make e juice?
For instance, if you are going to produce vegetable glycerin fairly quickly, you will need a minimum of 3-4 hours for this process – and about three months if you are going for the distilled option.
Can you vape with high THC?
On the other hand, if your goal is to get high, then you might want to go for a strain with a high THC content to produce your THC vape juice.
How long does THC vape juice last?
1. THC Vape Juice – Long-term THC extraction with Propylene Glycol (PG) and Vegetable Glycerine. (VG) (up to 3 months).
What is the liquid that is used to extract THC from cannabis?
And all of them carry the same principals of extracting the THC oil from the cannabis buds and mixing it with a carrier liquid such as propylene glycol (PG), Vegetable Glycerine (VG) or some form of Wax Liquidizer for extracts.
What is a dry herb vaporizer?
If you are unfamiliar with what a dry herb vaporizer is, here’s a simple answer: “A dry herb vaporizer, is a vaporizer that is for vaporizing dry herb, aka flower. ”. These vaporizers are generally easy to use and come in many different styles from portable to desktop vaporizers.
Which is the quickest vape oil?
Overall these methods are pretty effective, but the Rosin extraction Vape Oil is the quickest and cleanest if you already have the concentrates.
Can you buy cannabis in a vape?
In some places, it isn’t possible to purchase Cannabis in any form for one reason or another so your only option would be to make your own THC Vape Juice.
Can you get high from e-liquid?
THC & CBD E-liquid is not only a great way to get high, but it is also a great method to kick your nicotine habit.
Is THC vape oil legal?
For the reason that it has many advantages over smoking. If you find yourself lucky enough to stay in a country or state where Cannabis is legal , you may have seen the rise of Weed-based Vape Juice in Dab Pens.
How to Use THC Vape Juice?
THC vape juice is used in weed vape pens or E-Juice vaporizers. A vape device is made up of a mouthpiece, atomizer, and cartridge that holds the e-liquid. Vape pens are thin, pen-like structures. They are a discrete way to carry your vape device with you.
What are the ingredients in vape juice?
The main ingredients used in the base of vape juices are propylene glycol (PG) and vegetable glycerin (VG).
How to make weed oil thicker?
Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin. You want a bit more PG to create a thicker oil. If you are sensitive to PG, make the mixture with more VG. Stir the mixture thoroughly.
How to make weed oil?
The dark color protects cannabis from sunlight that can weaken the potency of the mixture. Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin. You want a bit more PG to create a thicker oil. If you are sensitive to PG, make the mixture with more VG. Stir the mixture thoroughly. Cover with the tight-fitting lid and store in a cool, dark place for approximately three months or so.
How long does it take to strain a marijuana vape?
If the blend becomes dry, add more of the propylene glycol and vegetable glycerin mixture. After three months, strain the mixture through a cheesecloth into a container for your marijuana vape juice. Place the strained mixture into a rice press to squeeze out any remaining liquid.
What is e juice?
E-juice, also known as e-liquid or vape oil, is the component of the vaping device that encompasses all the flavors, any nicotine, CBD, or THC. When heated, this juice is also the product that creates the vapor, giving the device its name. There are a wide variety of e-juice flavors to choose from. They can be mixed and matched to suit your ...
How long to decarb weed in oven?
Spread the desired amount of broken-down buds evenly on a baking sheet. Remove any stems. Bake for approximately 30 to 60 minutes or when done. Your decarbed weed is ready when it’s changed from green to light brown in color.
What is the process of making a vape juice?
Before preparing the vape juice itself, it is important to decarboxylate the buds first – or to bake it in the oven for a given time. It will transform tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBD) – the dormant compounds found in raw cannabis flowers – into their activated forms: THC and CBD, respectively. Without this step, the final tincture will not produce the touted psychoactive or therapeutic effects.
Why make your own homemade vape juice?
The best reason to make your own vape juice is that the mix created by you will suit your needs like nothing else. Inhaling weed is a deeply personal experience. Some people do it for recreational reasons, while many use it as medical treatment.
What is vape juice made of?
One of the most pressing questions asked is, “what is in vape juice?” There’s a lot of misinformation in this regard since many folks seem to think e-liquids are made of water vapor and nicotine.
What is a vaporizer e-liquid?
THC and CBD vape juice or e-liquid is a highly concentrated substance that is primarily used in vaporizers. Due to its many benefits – including potency, rapid onset, and cost-effectiveness – it has become a smash hit in the 420 community. Another major appeal is that it can be whipped up at your home.
How to make a weed brew?
Use a wooden spoon to stir the weed and alcohol mix slowly and continually. Alternatively, use a wooden stir stick. Doing so will boil off some of the alcohol in the brew. Keep at it until the buds get darker.
How to keep a kitchen ventilated during a vapor removal procedure?
During the procedure, keep the windows open to keep the kitchen ventilated and free of vapors.
Is vape juice good for you?
THC and CBD vape juice is one way of channeling these benefits. This potent substance boasts sky-high levels of cannabinoids that may range between 50-70%. Hence, it ensures that you can get powerful mind-altering or medicinal effects in no time. Best of all, THC and CBD vape juice could easily be prepared at the comfort of the home.
What is THC vape juice?
THC vaping juice, also known as e-juice, e-liquid, or vape oil, is the liquid that turns your bud to vapor when you heat it. It became popular after e-cigarettes hit the market. You can also purchase vape oil with nicotine or CBD.
How to use THC vaping juice?
You use your THC vaping juice in a vape pen. You need to fill a cartridge with the oil and insert it back into your pen. Sucking in activates the battery, which heats the juice and the vapor enters your mouth and into your lungs. Hold for a few seconds and exhale.
THC vaping juice effects
Vape juice with THC is highly potent. Cannabis bud contains from 12 to 35% THC, depending on the strain. Vaping juice contains 50 to 70% THC and can reach as high as 90%.
Why should you make your own THC vape juice
THC vaping juice can be difficult to find in stores, especially if you live in a state where recreational weed is still illegal. If you do find some, there can be a lot of additives reducing the potency.
How to make THC vape juice at home
After reading all of the benefits of THC vape juice, you’re probably wondering how to make THC vape juice? How can a dried piece of the plant turn into a potent oil that can be vaporized? It’s actually a lot simpler than it seems.
The final puff
THC vaping juice is a substance that can be vaporized that’s highly potent and flavorful. You use the oil in your vape pen and suck in the vapor to get high. It’s usually a stronger effect because of how concentrated it is.
How to make a VG e juice?
The instructions: In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. Cover it with parchment or wax paper to keep it from sticking to the spoon. Melt your wax.
How long to stir VG/PG mix?
Begin adding drops of your VG/PG mix (start with about 30) and stir for about a minute. The wax and the VG/PG mix should be completely incorporated.
How much THC is in a glob of wax?
If you have a glob of wax that weighs in at one gram, and that wax is 80% THC, then the dose will measure out to 800mg of THC.
What does E juice mean?
Just as a clarification, the “E” in THC E juice stands for “electronic” — meaning it can be vaporized using an electronic device like an e-cig or liquid vaporizer. The process of making one is relatively simple and it involves just a few tools that you may already have.
How to flatten a gram of hash oil?
In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. Cover it with parchment or wax paper to keep it from sticking to the spoon.
Can you put THC in a vaporizer?
Place your THC-infused e-juice into your vaporizer and enjoy!
Can you vaporize THC E juice?
However, anyone with an authentic liquid pen vaporizer or box that handles e-juice can vaporize THC E juice easily. Just as a clarification, the “E” in THC E juice stands for “electronic” — meaning it can be vaporized using an electronic device like an e-cig or liquid vaporizer.
What is VG in vaping?
Vegetable Glycerin (VG) is clear, and odorless. VG is also made from plant oils, most famously palm, soy or coconut oil (all of which are extremely good at absorbing THC for cooking with pot, so it makes sense that VG would be great for making the vaping juice best).
How to store THC vape juice?
Sometimes, it’s just best to buy a kit designed specifically to extract botanical plant material using VG solutions. This ensures everything is correct for the job: the VG solution (that it is made from the right oils and USP grade), syringes, and glass beakers; and ultimately reinforces the proper storage of the solution. It is senseless to go through all of this hard work only to spoil the resulting batch. Keep the THC juice in a drawer or other container that protect s from sunlight. However, it can be frozen (only it takes time to thaw completely and it is always advised that any juice entering the vape tank be room temperature).
Why do people vape?
There are a lot of reasons for wanting to vape marijuana instead of smoke it. Combustion is way worse for human health (as far as most research knows so far, vaping is far healthier). Obviously lighters burn at 3000-4600 degrees Fahrenheit, and people smoking small pipes or joints are inhaling this heat. This lung damage is outrageous and the pain is exactly what causes the coughing. Coughing is one of the main reasons people suspect heavier smoke in public. Turning normal marijuana bud into a vape-capable liquid allows it to be inhaled through a vape mod vaporizer. These $150-500 vaporizers are complex, impressive, and have many buttons and features…including the ability to control the voltage and temperatures. This allows users to keep the temperatures at a steady 365-405 degrees Fahrenheit…a drastic difference that makes the lungs smile wide!
How to make eliquid without alcohol?
The Best THC eLiquid Recipe Without Using Alcohol (guide, how-to) Step 1: Place the cooking pot on the direct center of the burner and pour the VG (or PG) solution into the pot. Add the marijuana contribution, being certain to evenly disseminate. The fork may come in handy for this.
How long to heat pot for weed?
Step 2: Set heat to “2” or “slightly higher than low, but no where near medium heat” and set the timer to 30 minutes. Step 3: After the timer, attend the pot, gently stir with the fork to ensure all marijuana is evenly distributed throughout the oil. This is the first opportunity to assess the situation.
Can you vape dry weed?
It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped. It looks a lot like any other solution that would be in the vape tank. People always seem to assume it is nicotine. In marijuana-friendly states, some pot shops actually sell these ejuice tinctures. But it is possible to make your own marijuana THC ...
Can you make a liquid pot with a vape mod?
Could THC be extracted from weed, turned into an eliquid and used in a vape mod? It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped.
Why Do Smokers Vape Cannabis?
Many consumers prefer to consume THC vape juice because this is concentrated THC. THC vape juice effects are very similar to smoking a very high THC weed strain. First-time users and those with low tolerance to THC will experience the following side effects: disorientation to time and place, increased reception to stimuli, euphoria and extreme hunger, or the munchies.
Is it Legal to Consume THC Vape Juice?
It’s hard to tell if THC vape juice is legal or not especially when you’re from the US. The best way to find out is to access marijuana laws in your area. Some states allow the use of medical marijuana only while some regulate the use of recreational and medicinal cannabis.
Benefits of Making Your Your Own Vape Juice
- You Can Fine-tune the Amount of THC in your Juice
You can get the right amount of high. You don’t get short-changed, and you don’t get too heavy-headed after. You get the right amount of THC that you prefer every time.
Long-Term Steeping Or Extraction
- Long-term steeping or extraction is an easy way to make vape juice with THC. But it also takes the most amount of time, as you need around three months to do complete the process. As a near-effortless process, this method is almost fool-proof, as there are only two (2) crucial phases here: decarboxylating your strain and mixing it with your VG and PG solution. If you want to explore thi…
Fast-Track Infusion
- This process is not that different from the long-term or three-month infusion. You will need the tools listed above, plus a few more, such as: 1. To get started, grind and decarboxylate your buds, just like you would in the first step. Prepare your PG/VG solution, including any masking flavors. 2. Then let the buds cool down, and pour in your solution in the jar until all the buds are fully subme…
Conclusion
- These steps are listed to serve as a guide in your foray to making your vape juice that’s infused with THC. The methods listed above in making THC vape juice can be modified as you deem fit to your preference. You might not get it right the first time, but it takes practice to help you get the right mixture. That said, consider this article as your cheat sheet as you experiment with differen…