Instructions:
- In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. ...
- Melt your wax. There are a couple of methods to accomplish this. ...
- Begin adding drops of your VG/PG mix (start with about 30) and stir for about a minute. ...
- Let the mixture cool completely. ...
- Place your THC-infused e-juice into your vaporizer and enjoy!
How to make THC vape juice?
Most of these processes involve the extraction of the THC oil from cannabis bud and then mixing with the carrier liquid – like vegetable glycerin (VG), propylene glycol (PG) and some other kinds of wax liquidizer. The method we will discuss here on how to make THC vape juice is a simple method that anyone can implement.
How to make high quality PG/VG vape weed?
Add the cannabis mix in the jar to the water in the pot and heat to about 180℉ (85℃). Once the desired temperature had been reached, it is essential to maintain it at that level without going above it. This is important to allow the THC to fuse with your PG/VG mix and still retain its high quality.
Can you make weed vape juice with vegetable glycerin?
If you’re using vegetable glycerin to make your own vape juice, avoid using any sweetener. You don’t need stevia or anything that resembles these substances. VG is the best natural sweetener for weed vape juice. 5. Let it darken
Can you use marijuana juice with a vape mod?
Using marijuana juice with a vape mod is very easy. The juice gets loaded the same exact way. However, the settings are a little different than nicotine vape juices. THC vapes best at 365-405 degress Fahrenheit, which also works best with 3.2-4.6 voltage and room temperature resistance.
How do you make THC wax liquid?
Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.
How do I know if my vape juice has THC in it?
Look for lab test results. Any legal vape cart sold at a dispensary is required to have a label showing the total amount of THC. Some dispensaries also provide total terpenes, cannabinoids, as well as a statement letting consumers know that no Vitamin E acetate was found.
How are THC cartridges made?
Cartridge chambers are typically made from see-through plastic and are sealed at the top by the mouthpiece and at the bottom by the atomizer. Last but not least is the atomizer. An atomizer is effectively a heating element that is powered up by the battery underneath it.
How do you make rosin vape juice?
Mix the Everclear and rosin in a 10:1 ratio of alcohol to rosin and place on a heating pad set to low heat. We want just enough heat to help the alcohol and rosin to mix together thoroughly. Stir them together with a dab tool and within minutes you'll see the fats and waxes start to separate.
How do you make homemade vape juice?
How to Make Vape JuiceUse LNW E Liquid Calculator to calculate recipe.Add Nicotine Base or Nicotine Salt.Add Propylene Glycol.Add Vegetable Glycerin.Add Flavoring.Shake Thoroughly.
How long does it take to make THC vape juice?
Long-term steeping or extraction is an easy way to make vape juice with THC. But it also takes the most amount of time, as you need around three months to do complete the process.
How to make a VG bud?
Water. To get started, grind and decarboxylate your buds, just like you would in the first step. Prepare your PG/VG solution, including any masking flavors. Then let the buds cool down, and pour in your solution in the jar until all the buds are fully submerged.
How to heat a double boiler?
Add water to the bigger reservoir of your double boiler, around half an inch deep. Then add water to the smaller container of the double boiler. Put your double boiler on the stove and heat it until you get a temperature of 220 degrees Fahrenheit.
How long does VG/PG solution last?
During the process, you will need to stir it every two (2) weeks to ensure even distribution. You may also add more VG/PG solution. Once you reach three (3) months, take out your mixture and give it a final stir.
Can you vape THC juice?
How to Make THC Vape Juice At Home. Vaping has become another acceptable way of consuming cannabis. It does not have the irritation you may get when smoking, as it poses as a less risky alternative to the usual burning of dried material. You get the same hit and flavor in a healthier alternative. Now, vaping THC-infused juice gets even better ...
Can you use cheesecloth to vape?
The cheesecloth will serve as a filter to keep the particles of your buds from mixing into the final juice. You can now use this THC vape juice. You can use a syringe to apply to your e-cigarette or vaporizer.
Can you fine tune THC in juice?
You Can Fine-tune the Amount of THC in your Juice. You can get the right amount of high. You don’t get short -changed, and you don’t get too heavy-headed after. You get the right amount of THC that you prefer every time.
How to make a weed vape juice?
Stir the mixture frequently while simmering. When done, remove the jar from the pans and let cool slightly. Strain the mixture through the cheesecloth into your weed vape juice container. Give the cannabis mixture one more squeeze with the rice press to remove any remaining liquid.
What is THC vape juice?
THC vape juice is used in weed vape pens or E-Juice vaporizers. A vape device is made up of a mouthpiece, atomizer, and cartridge that holds the e-liquid. Vape pens are thin, pen-like structures. They are a discrete way to carry your vape device with you. Vaporizers, also called mods, are more substantial and less inconspicuous.
How to make weed oil thicker?
Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin. You want a bit more PG to create a thicker oil. If you are sensitive to PG, make the mixture with more VG. Stir the mixture thoroughly.
How long does it take to strain a marijuana vape?
If the blend becomes dry, add more of the propylene glycol and vegetable glycerin mixture. After three months, strain the mixture through a cheesecloth into a container for your marijuana vape juice. Place the strained mixture into a rice press to squeeze out any remaining liquid.
What are the ingredients in vape juice?
The main ingredients used in the base of vape juices are propylene glycol (PG) and vegetable glycerin (VG).
What is e juice?
E-juice, also known as e-liquid or vape oil, is the component of the vaping device that encompasses all the flavors, any nicotine, CBD, or THC. When heated, this juice is also the product that creates the vapor, giving the device its name. There are a wide variety of e-juice flavors to choose from. They can be mixed and matched to suit your ...
How to can decarbed marijuana?
Place your decarbed marijuana into a dark-colored jar that has a tight-fitting lid. Mason jars for canning are an excellent choice. The dark color protects cannabis from sunlight that can weaken the potency of the mixture. Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin.
How to make THC e juice?
Most of these processes involve the extraction of the THC oil from cannabis bud and then mixing with the carrier liquid – like vegetable glycerin (VG), propylene glycol (PG) and some other kinds of wax liquidizer.
What strain of vape juice is best for CBD?
If you want to make CBD vape juice, you might want to start with a strain with high C BD and low TH C; strains like ACDC, Canatonic, or Harlequin. CBD e juice is preferred by users who do not want to feel the high effects derived from using THC. On the other hand, if your goal is to get high, then you might want to go for a strain with ...
How to heat up a pot of cannabis?
Ensure there is enough of the mix to cover all of the cannabis buds. Pour water into a bigger pot, and also add water to a second pot before placing in the big pot. Place the pot on the stovetop and heat until you reach a temperature of 220℉ (105℃). This is where access to an accurate thermometer would be very useful.
How to make a VG bud?
Preheat the oven to 250℉ (121℃). Next, grind the cannabis buds. It is better if the grind is fairly uniform. Get a baking tray and spread your ground cannabis across it evenly. Then cover the entire mass with foil. Once the oven is heated, pop the baking tray in. The next step involves the PG/VG.
How long does it take to make e juice?
For instance, if you are going to produce vegetable glycerin fairly quickly, you will need a minimum of 3-4 hours for this process – and about three months if you are going for the distilled option.
How long to leave PG in oven?
Leave the cannabis in the oven for about 40 minutes, remove and allow it to cool (The decarboxylation process is essential in the conversion of THCa to THC)
How to make a VG e juice?
The instructions: In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. Cover it with parchment or wax paper to keep it from sticking to the spoon. Melt your wax.
How much THC is in a glob of wax?
If you have a glob of wax that weighs in at one gram, and that wax is 80% THC, then the dose will measure out to 800mg of THC.
Can you vaporize THC E juice?
However, anyone with an authentic liquid pen vaporizer or box that handles e-juice can vaporize THC E juice easily. Just as a clarification, the “E” in THC E juice stands for “electronic” — meaning it can be vaporized using an electronic device like an e-cig or liquid vaporizer.
What is VG in vaping?
Vegetable Glycerin (VG) is clear, and odorless. VG is also made from plant oils, most famously palm, soy or coconut oil (all of which are extremely good at absorbing THC for cooking with pot, so it makes sense that VG would be great for making the vaping juice best).
Why do people vape?
There are a lot of reasons for wanting to vape marijuana instead of smoke it. Combustion is way worse for human health (as far as most research knows so far, vaping is far healthier). Obviously lighters burn at 3000-4600 degrees Fahrenheit, and people smoking small pipes or joints are inhaling this heat. This lung damage is outrageous and the pain is exactly what causes the coughing. Coughing is one of the main reasons people suspect heavier smoke in public. Turning normal marijuana bud into a vape-capable liquid allows it to be inhaled through a vape mod vaporizer. These $150-500 vaporizers are complex, impressive, and have many buttons and features…including the ability to control the voltage and temperatures. This allows users to keep the temperatures at a steady 365-405 degrees Fahrenheit…a drastic difference that makes the lungs smile wide!
How to make eliquid without alcohol?
The Best THC eLiquid Recipe Without Using Alcohol (guide, how-to) Step 1: Place the cooking pot on the direct center of the burner and pour the VG (or PG) solution into the pot. Add the marijuana contribution, being certain to evenly disseminate. The fork may come in handy for this.
How long to heat pot for weed?
Step 2: Set heat to “2” or “slightly higher than low, but no where near medium heat” and set the timer to 30 minutes. Step 3: After the timer, attend the pot, gently stir with the fork to ensure all marijuana is evenly distributed throughout the oil. This is the first opportunity to assess the situation.
Can you vape with vegetable oil?
However, one important fact to understand going into it: the vape juice that is commonly sold in vape stores is not made with typical vegetable cooking oil.
Can you vape dry weed?
It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped. It looks a lot like any other solution that would be in the vape tank. People always seem to assume it is nicotine. In marijuana-friendly states, some pot shops actually sell these ejuice tinctures. But it is possible to make your own marijuana THC ...
Can you make a liquid pot with a vape mod?
Could THC be extracted from weed, turned into an eliquid and used in a vape mod? It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped.
What is the process of making a vape juice?
Before preparing the vape juice itself, it is important to decarboxylate the buds first – or to bake it in the oven for a given time. It will transform tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBD) – the dormant compounds found in raw cannabis flowers – into their activated forms: THC and CBD, respectively. Without this step, the final tincture will not produce the touted psychoactive or therapeutic effects.
How to make a weed tincture?
Set it on top of the stove. Place the mason jar with the thick cannabis liquid inside it. Reboil the water. Continue boiling until only about 5 ml of the concoction is left in the jar. To make sure that you have the right amount, use a 5-ml syringe or dropper to measure the liquid.
What is a vaporizer e-liquid?
THC and CBD vape juice or e-liquid is a highly concentrated substance that is primarily used in vaporizers. Due to its many benefits – including potency, rapid onset, and cost-effectiveness – it has become a smash hit in the 420 community. Another major appeal is that it can be whipped up at your home.
Can you use shake and trimmings instead of nugs?
Also, there is an option to use shake and trimmings instead of high-quality nugs. Place the lightly ground buds into the Pyrex tray. If there is no Pyrex on hand, a baking pan – preferably one with raised edges – will do.
Is vaping a good way to consume marijuana?
Like 5. 5 likes. Vaping is, without a doubt, one of the most popular ways of consuming marijuana – and rightly so. Not only does it provide fast-acting effects, but it also lowers the risk of respiratory infections and other smoking-related health hazards. This method of consumption is also discreet and cost-effective.
Is vape juice good for you?
THC and CBD vape juice is one way of channeling these benefits. This potent substance boasts sky-high levels of cannabinoids that may range between 50-70%. Hence, it ensures that you can get powerful mind-altering or medicinal effects in no time. Best of all, THC and CBD vape juice could easily be prepared at the comfort of the home.
What Is Weed Vape Juice?
Weed vape juice is a concentrated cannabis extract featuring thinning agents like propylene glycol, vegetable glycerin, and terpenes used to create a runnier e-juice consistency, which is easier to vaporize by your vape pen’s heating unit.
Ingredients and Equipment
Ready to make THC vape juice to puff away on your vape pen? Here is exactly what you will need, from start to finish.
How to Make Weed Vape Juice
If you follow these steps, you should have your very own vape juice in no time.
Learn the Art of Cannabis Infusions at CTU
Go beyond vape juice recipes and expand your infusion skills by enrolling in Cannabis Training University’s online industry training and receive a cannabis cooking certification. Whether you want to improve your hobby or get hired in the industry, CTU can empower you with an in-depth cannabis education. Enroll today!
How to make a crock pot with glycerin?
Take one of your small, sealable glass jars and mix the vegetable glycerin and decarboxylated cannabis inside of it. Seal the jar then shake to mix the ingredients up as much as possible. Next, fill your crockpot with water until it ’s halfway full, then fold a small towel into the bottom of the crockpot. Place the sealed glass jar ...
How long to bake weed in oven?
To do this, you will need to preheat your oven to 240° and spread your ground cannabis onto a baking sheet and bake for 50-60 minutes.
Can you use glycerin in tinctures?
Using tinctures are a great way to medicate with cannabis without ingesting toxic chemicals that may harm you. Check out our recipe below for making potent cannabis infused glycerin that you can use for tinctures, candies or vaporizer “e-juice” recipes.
Can you make tinctures with cannabis?
Or maybe you are looking for an easy-to-make medical tincture that you can take on a daily basis. When you infuse vegetable glycerin with cannabis you get a safe method of creating a tincture that you can make lots of things with. Using tinctures are a great way to medicate with cannabis without ingesting toxic chemicals that may harm you.
Can you put glycerin in a crock pot?
Place the sealed glass jar with the cannabis and glycerin mixture inside of the crockpot, but resting on top of the towel. This towel exists so your glass does not break on the crockpot, be careful! Place the lid on your crock pot and turn it on to the lowest setting.
How to make a vape juice?
DIY THC Vape Juice 1 Chop your plant matter and decarboxylate it in a 230℉ oven for 35 minutes. 2 Place the decarboxylated cannabis in a quart (32-ounce) mason jar. 3 Pour in 32 ounces of the highest-proof alcohol you can get. Everclear works well, but by all means, avoid isopropyl alcohol. 4 Cover the jar tightly. A screw-on lid works nicely here. 5 Shake well. 6 Place the mason jar in a brown paper bag and store in a cabinet or closet. Storing the jar in a bag in a dark place keeps sunlight from spoiling the tincture. 7 Monitor the location where you store your brew. It should be warm/room temperature, NOT hot. 8 Let the mason jar sit for 30-60 days (the longer the better). 9 After the steeping period, remove the plant matter from the remaining liquid by straining through a cheesecloth. 10 Store the liquid in an opaque bottle out of the sun to preserve its potency.
How to store THC vape juice?
Store the liquid in an opaque bottle out of the sun to preserve its potency. This type of THC vape juice is very watery (because it’s just alcohol and marijuana ), but some of the other products you can make yourself (like cannabis oil and liquid THC) may turn out more viscous (a fancy term for “thick like grease”).
How many hits can you take with a vape pen?
With a vape pen, you can take one hit, set it aside, and a few minutes later, come back and take another hit. So you can really experiment with how many tokes it takes to get you good and high. With that information, you’ll know exactly how much THC vape juice you’re going to need for a quality smoke sesh.
Why is propylene glycol used in vape juice?
Propylene glycol is added to many foods and beverages to help distribute flavors evenly throughout. Here’s a table that illustrates the differences between vegetable glycerin and propylene glycol. Vape juice manufacturers use VG or PG (sometimes both) as a base in which to mix all the other ingredients.
What happens if you vape with too much THC?
These cannabinoids temper the effects of THC and make them more enjoyable. Without CBD and the like, too much THC can cause: Debilitating anxiety. Paranoia.
What are the effects of vaping THC?
Common effects of THC vape juice include: Distortion of time. Increased receptivity to stimuli. Drowsiness.
What is the chemical formula for propylene glycol?
For those of you chemistry buffs out there, the chemical formula of propylene glycol is C3H8O2. Propylene glycol is added to many foods and beverages to help distribute flavors evenly throughout.
Benefits of Making Your Your Own Vape Juice
Long-Term Steeping Or Extraction
- Long-term steeping or extraction is an easy way to make vape juice with THC. But it also takes the most amount of time, as you need around three months to do complete the process. As a near-effortless process, this method is almost fool-proof, as there are only two (2) crucial phases here: decarboxylating your strain and mixing it with your VG and ...
Fast-Track Infusion
- This process is not that different from the long-term or three-month infusion. You will need the tools listed above, plus a few more, such as: 1. To get started, grind and decarboxylate your buds, just like you would in the first step. Prepare your PG/VG solution, including any masking flavors. 2. Then let the buds cool down, and pour in your solution in the jar until all the buds are fully subme…
Rosin Extracted Thc Vape Juice
- This is one of the quickest ways to make vape juice infused with THC. If you own a rosin press or buy rosin, you may want to consider this step. Here are what you need: 1. If you will still extract rosin, follow the instructions of the manufacturer of your rosin press. Collect the rosin in a clean container. 2. Add 0.5 grams of your extracts and mix with a milliliter of your Wax Liquidizer in th…
Conclusion
- These steps are listed to serve as a guide in your foray to making your vape juice that’s infused with THC. The methods listed above in making THC vape juice can be modified as you deem fit to your preference. You might not get it right the first time, but it takes practice to help you get the right mixture. That said, consider this article as your cheat sheet as you experiment with differen…