Use only "food-grade" vegetable glycerin. Mix the cannabis extract with the vape medium in a 1:1 or 1:2 ratio, depending on how strong you would like your mixture. Boil water in a kettle and place the hot water in a bowl.
Full Answer
Can you make weed vape juice with vegetable glycerin?
If you’re using vegetable glycerin to make your own vape juice, avoid using any sweetener. You don’t need stevia or anything that resembles these substances. VG is the best natural sweetener for weed vape juice. 5. Let it darken
How to make homemade vape juice stronger?
The darker your homemade vape juice is, the stronger it’ll be. Let the mix breathe for a while before storing it. The liquid will get darker, making it more powerful, which means a much better high when you take a puff. 6. Store it in the dark
How to make high quality PG/VG vape weed?
Add the cannabis mix in the jar to the water in the pot and heat to about 180℉ (85℃). Once the desired temperature had been reached, it is essential to maintain it at that level without going above it. This is important to allow the THC to fuse with your PG/VG mix and still retain its high quality.
Can You Make your own THC vape juice?
Thankfully, making your own THC vape juice is not a complicated process if done in a controlled environment. It is essential to understand that the effects of THC vs. CBD differ a great deal. If you want to make CBD vape juice, you might want to start with a strain with high CBD and low THC; strains like ACDC, Canatonic, or Harlequin.
How do you make glycerin with vape juice?
How to make vape juice:Use LNW E Liquid Calculator to calculate recipe.Add Nicotine Base or Nicotine Salt.Add Propylene Glycol.Add Vegetable Glycerin.Add Flavoring.Shake Thoroughly.
Can you make vape juice with water?
In short - yes, you can your e-liquid with water. Be mindful of the quantity of water you add and ALWAYS use distilled water. Start by adding a little bit of water and keep track of your experiments. Too much water may lower the atomizer temperature due to its lower boiling point.
How do you make your own vape liquid?
1:182:52How to make Vape Juice - Beginners guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck out make my bakes recipe and they're also a liquid calculator. So make sure you're getting theMoreCheck out make my bakes recipe and they're also a liquid calculator. So make sure you're getting the perfect flavor. And also make sure you use the calculator to check the measurements of VG PG.
How do you make rosin vape juice?
Mix the Everclear and rosin in a 10:1 ratio of alcohol to rosin and place on a heating pad set to low heat. We want just enough heat to help the alcohol and rosin to mix together thoroughly. Stir them together with a dab tool and within minutes you'll see the fats and waxes start to separate.
Can I put honey in my vape?
Heating up honey causes it to caramelize and bubble, not vaporize. Trying to vape honey would undoubtedly ruin the coil and be a complete mess in your tank, not to mention ruining perfectly good honey.
How do you make homemade vape juice without nicotine?
With or without nicotine, the method remains the same. Simply choose a neutral base with the ratio of your choice (50/50, full VG ...) then add the flavors to make your homemade e cig juice. This will give you an e juice without nicotine.
What ingredients should you avoid in vape juice?
Ingredients You Should Avoid Using In Your Vape JuiceMint or Menthol. Don't purchase any e juices that have mint or menthol mentioned as a flavor. ... Caffeine. ... Cinnamon. ... Diketones. ... Vanilla. ... Fragrance oils. ... Strawberry and Banana flavors. ... Titanium dioxide.
What ingredients are in vape juice?
E-Liquid is made up of four basic ingredients; water, nicotine, flavorings, and a propylene glycol or vegetable glycerin base (or sometimes a mixture of PG and VG). Nicotine – The addictive ingredient found in e-cigarettes and traditional cigarettes.
Can I vape vegetable oil?
Vegetable oil and vitamin E can help deliver desired drugs to vapers. But they may also cause harm, especially if they're not heated up right. In theory, vape users should not be ingesting any liquid oils when they inhale, only the vapor from e-cigarettes that looks like white smoke.
How do you make vape juice concentrate?
0:311:36Turn Concentrates into Vape Juice - Wax Liquidizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst take a gram of shatter. And mix it with two millimeters of wax. Liquidizer. Just put it in theMoreFirst take a gram of shatter. And mix it with two millimeters of wax. Liquidizer. Just put it in the microwave for 10 seconds. It's really that easy.
Can you turn resin into vape juice?
The following types of cannabis concentrate will work for making e juice: distillate, CO2 oil, live resin, sauce, shatter, and rosin. Shatter is the most commonly used for making THC vape juice. In fact, the first two do not need anything added.
What is the process of making a vape juice?
Before preparing the vape juice itself, it is important to decarboxylate the buds first – or to bake it in the oven for a given time. It will transform tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBD) – the dormant compounds found in raw cannabis flowers – into their activated forms: THC and CBD, respectively. Without this step, the final tincture will not produce the touted psychoactive or therapeutic effects.
How to make a weed tincture?
Set it on top of the stove. Place the mason jar with the thick cannabis liquid inside it. Reboil the water. Continue boiling until only about 5 ml of the concoction is left in the jar. To make sure that you have the right amount, use a 5-ml syringe or dropper to measure the liquid.
What is a vaporizer e-liquid?
THC and CBD vape juice or e-liquid is a highly concentrated substance that is primarily used in vaporizers. Due to its many benefits – including potency, rapid onset, and cost-effectiveness – it has become a smash hit in the 420 community. Another major appeal is that it can be whipped up at your home.
Can you use shake and trimmings instead of nugs?
Also, there is an option to use shake and trimmings instead of high-quality nugs. Place the lightly ground buds into the Pyrex tray. If there is no Pyrex on hand, a baking pan – preferably one with raised edges – will do.
Does a water bath help with alcohol?
This way, there is less risk for alcohol to overheat. At this point, you want to make sure that the room is well-ventilated. If the stove has a vent, turn it on.
Is vaping a good way to consume marijuana?
Like 5. 5 likes. Vaping is, without a doubt, one of the most popular ways of consuming marijuana – and rightly so. Not only does it provide fast-acting effects, but it also lowers the risk of respiratory infections and other smoking-related health hazards. This method of consumption is also discreet and cost-effective.
Is vape juice good for you?
THC and CBD vape juice is one way of channeling these benefits. This potent substance boasts sky-high levels of cannabinoids that may range between 50-70%. Hence, it ensures that you can get powerful mind-altering or medicinal effects in no time. Best of all, THC and CBD vape juice could easily be prepared at the comfort of the home.
How to make a vape medium with cannabis extract?
Mix the cannabis extract with the vape medium in a 1:1 or 1:2 ratio, depending on how strong you would like your mixture. Boil water in a kettle and place the hot water in a bowl. Put the jar with your extract and medium in the boiling water. Stir the mixture until it's homogeneous.
How long does it take to strain a vape?
Repeat step 4 at the two-month mark. After about three months, your vape juice will be ready to strain. Place a few layers of cheesecloth inside the strainer and put the strainer on top of the second mason jar. Add the cannabis/VG mix and let the liquid drain into the jar.
How to make a rosin e-liquid?
Remove the boiling water from the heat source, and place the mason jar in the water. Stir until the rosin and medium mix to an even consistency. Transfer the mix to a clean vape cartridge using the syringe and enjoy. So, there you have it— three simple methods for making cannabis e-liquid at home.
What are the advantages of making a cannabis e-juice?
Making cannabis e-juice consists of two basic steps: Extracting the active ingredients in the cannabis. Combining the cannabis extraction with a vape medium.
How to make solventless extraction?
The easiest way to make a solventless cannabis extraction is to create rosin. The rosin technique involves applying low heat and pressure to cannabis flowers. Rosin is fast becoming the most popular cannabis concentrate because it's safe and chemical-free.
How to make a bud iron?
Cut a piece of parchment paper so that it's slightly larger than the iron's metal plate when folded in half. Place 1 or 2 grams of cannabis inside the folded parchment paper. Put the folded paper and cannabis inside the iron and squeeze as hard as you can for about five seconds. Remove the flattened bud.
How to make a tincture with cannabis?
You can make alcohol extractions using cannabis buds, trim, leaf, or kief. You'll need to prepare your cannabis first by using a process called decarboxylation.
What Is Weed Vape Juice?
Weed vape juice is a concentrated cannabis extract featuring thinning agents like propylene glycol, vegetable glycerin, and terpenes used to create a runnier e-juice consistency, which is easier to vaporize by your vape pen’s heating unit.
Ingredients and Equipment
Ready to make THC vape juice to puff away on your vape pen? Here is exactly what you will need, from start to finish.
How to Make Weed Vape Juice
If you follow these steps, you should have your very own vape juice in no time.
Learn the Art of Cannabis Infusions at CTU
Go beyond vape juice recipes and expand your infusion skills by enrolling in Cannabis Training University’s online industry training and receive a cannabis cooking certification. Whether you want to improve your hobby or get hired in the industry, CTU can empower you with an in-depth cannabis education. Enroll today!
How long does it take to make THC vape juice?
Long-term steeping or extraction is an easy way to make vape juice with THC. But it also takes the most amount of time, as you need around three months to do complete the process.
How to make a VG bud?
Water. To get started, grind and decarboxylate your buds, just like you would in the first step. Prepare your PG/VG solution, including any masking flavors. Then let the buds cool down, and pour in your solution in the jar until all the buds are fully submerged.
How to extract rosin from a rosin press?
If you will still extract rosin, follow the instructions of the manufacturer of your rosin press. Collect the rosin in a clean container. Add 0.5 grams of your extracts and mix with a milliliter of your Wax Liquidizer in the Pyrex container.
How to heat a double boiler?
Add water to the bigger reservoir of your double boiler, around half an inch deep. Then add water to the smaller container of the double boiler. Put your double boiler on the stove and heat it until you get a temperature of 220 degrees Fahrenheit.
How long does VG/PG solution last?
During the process, you will need to stir it every two (2) weeks to ensure even distribution. You may also add more VG/PG solution. Once you reach three (3) months, take out your mixture and give it a final stir.
Can you vape THC juice?
How to Make THC Vape Juice At Home. Vaping has become another acceptable way of consuming cannabis. It does not have the irritation you may get when smoking, as it poses as a less risky alternative to the usual burning of dried material. You get the same hit and flavor in a healthier alternative. Now, vaping THC-infused juice gets even better ...
Can you use cheesecloth to vape?
The cheesecloth will serve as a filter to keep the particles of your buds from mixing into the final juice. You can now use this THC vape juice. You can use a syringe to apply to your e-cigarette or vaporizer.
How to make a weed vape juice?
Stir the mixture frequently while simmering. When done, remove the jar from the pans and let cool slightly. Strain the mixture through the cheesecloth into your weed vape juice container. Give the cannabis mixture one more squeeze with the rice press to remove any remaining liquid.
How long does it take to strain a marijuana vape?
If the blend becomes dry, add more of the propylene glycol and vegetable glycerin mixture. After three months, strain the mixture through a cheesecloth into a container for your marijuana vape juice. Place the strained mixture into a rice press to squeeze out any remaining liquid.
How to make weed oil thicker?
Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin. You want a bit more PG to create a thicker oil. If you are sensitive to PG, make the mixture with more VG. Stir the mixture thoroughly.
What is THC vape juice?
THC vape juice is used in weed vape pens or E-Juice vaporizers. A vape device is made up of a mouthpiece, atomizer, and cartridge that holds the e-liquid. Vape pens are thin, pen-like structures. They are a discrete way to carry your vape device with you. Vaporizers, also called mods, are more substantial and less inconspicuous.
What are the ingredients in vape juice?
The main ingredients used in the base of vape juices are propylene glycol (PG) and vegetable glycerin (VG).
What is e juice?
E-juice, also known as e-liquid or vape oil, is the component of the vaping device that encompasses all the flavors, any nicotine, CBD, or THC. When heated, this juice is also the product that creates the vapor, giving the device its name. There are a wide variety of e-juice flavors to choose from. They can be mixed and matched to suit your ...
How to can decarbed marijuana?
Place your decarbed marijuana into a dark-colored jar that has a tight-fitting lid. Mason jars for canning are an excellent choice. The dark color protects cannabis from sunlight that can weaken the potency of the mixture. Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin.
What Is Cannabis E-Juice?
Cannabis e-juice, also known as vape oil, is a concentrate containing a high concentration of cannabinoids, terpenes, and a thinning agent used to create the right oil viscosity to be vaporized. A portable vaporizer’s heating device heats the oil just enough to produce a vapor which is then inhaled through the mouthpiece.
What Do You Need to Make a DIY Cannabis E-Juice Recipe?
For this cannabis e-juice recipe you will either need cannabis flower buds, trim, or cannabis concentrates. Using concentrates can speed up the e-juice production process. Here is what you will need to make cannabis e-juice at home.
Cannabis E-Juice Recipe in 5 Easy Steps
Making your own cannabis e-juice at home is easier than ever. Our cannabis e-juice recipe is an alternative to traditional nicotine e-juices. Here are 5 steps to our easy cannabis e-juice recipe.
Learn More Cannabis Recipes at Cannabis Training University
Cannabis flower buds, trim, and concentrate can be transformed into a variety of products including baked goods, topicals, transdermal patches, capsules, beverages, tinctures, and so much more. Learn how to create all of these products at home by enrolling in Cannabis Training University’s online marijuana college.
How to make THC e juice?
Most of these processes involve the extraction of the THC oil from cannabis bud and then mixing with the carrier liquid – like vegetable glycerin (VG), propylene glycol (PG) and some other kinds of wax liquidizer.
What strain of vape juice is best for CBD?
If you want to make CBD vape juice, you might want to start with a strain with high C BD and low TH C; strains like ACDC, Canatonic, or Harlequin. CBD e juice is preferred by users who do not want to feel the high effects derived from using THC. On the other hand, if your goal is to get high, then you might want to go for a strain with ...
How to heat up a pot of cannabis?
Ensure there is enough of the mix to cover all of the cannabis buds. Pour water into a bigger pot, and also add water to a second pot before placing in the big pot. Place the pot on the stovetop and heat until you reach a temperature of 220℉ (105℃). This is where access to an accurate thermometer would be very useful.
How to make a VG bud?
Preheat the oven to 250℉ (121℃). Next, grind the cannabis buds. It is better if the grind is fairly uniform. Get a baking tray and spread your ground cannabis across it evenly. Then cover the entire mass with foil. Once the oven is heated, pop the baking tray in. The next step involves the PG/VG.
How long does it take to make e juice?
For instance, if you are going to produce vegetable glycerin fairly quickly, you will need a minimum of 3-4 hours for this process – and about three months if you are going for the distilled option.
How long to leave PG in oven?
Leave the cannabis in the oven for about 40 minutes, remove and allow it to cool (The decarboxylation process is essential in the conversion of THCa to THC)
What is THC vape juice?
THC vaping juice, also known as e-juice, e-liquid, or vape oil, is the liquid that turns your bud to vapor when you heat it. It became popular after e-cigarettes hit the market. You can also purchase vape oil with nicotine or CBD.
How to use THC vaping juice?
You use your THC vaping juice in a vape pen. You need to fill a cartridge with the oil and insert it back into your pen. Sucking in activates the battery, which heats the juice and the vapor enters your mouth and into your lungs. Hold for a few seconds and exhale.
THC vaping juice effects
Vape juice with THC is highly potent. Cannabis bud contains from 12 to 35% THC, depending on the strain. Vaping juice contains 50 to 70% THC and can reach as high as 90%.
Why should you make your own THC vape juice
THC vaping juice can be difficult to find in stores, especially if you live in a state where recreational weed is still illegal. If you do find some, there can be a lot of additives reducing the potency.
How to make THC vape juice at home
After reading all of the benefits of THC vape juice, you’re probably wondering how to make THC vape juice? How can a dried piece of the plant turn into a potent oil that can be vaporized? It’s actually a lot simpler than it seems.
The final puff
THC vaping juice is a substance that can be vaporized that’s highly potent and flavorful. You use the oil in your vape pen and suck in the vapor to get high. It’s usually a stronger effect because of how concentrated it is.
