There are a few ways to reclaim it. Alcohol dissolves the resin which can then be used in a tincture or evaporated leaving the resin to vape. If you plan on making a tincture, use alcohol safe for human consumption. Everclear, vodka, or another high proof distilled beverage.
Full Answer
How to make THC vape juice?
Here we’ll go over how to make shatter, wax and other concentrates into THC vape juice that can be vaped out of a standard e-cig. Also known as THC e juice, the process involves combining the concentrate with a diluent to make it thin enough to vape easily in an oil pen. This also is known as making your own THC cartridge.
How to make DIY vape juice flavors?
Add a few 50 mL plastic bottles and a couple of plastic pipettes to your cart. Have a look at the DIY vape juice flavorings and pick a few that appeal to you. When you get your package, use the pipettes to drip about 10-20 drops of flavoring in one of your empty bottles.
Do you need advanced knowledge of chemistry to make vape juice?
You don’t need advanced knowledge of chemistry. If you can make a cocktail, you can make your own vape juice. For the simplest way to make vape juice, give this a try: Visit an online DIY vape shop (like Ecigexpress, Wizardlabs, etc).
How do you make vape juice with pipettes?
When you get your package, use the pipettes to drip about 10-20 drops of flavoring in one of your empty bottles. Fill your bottle up to the middle with PG and the rest with VG. Shake and set aside for a few hours to let the bubbles settle. Try your vape juice, and adjust to taste.
How do you turn wax into vape juice?
The process of getting the Vape juice Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.
How do you make homemade vape juice?
How to Make Vape JuiceUse LNW E Liquid Calculator to calculate recipe.Add Nicotine Base or Nicotine Salt.Add Propylene Glycol.Add Vegetable Glycerin.Add Flavoring.Shake Thoroughly.
How do you get reclaim from vape?
Steps To Collect ReclaimFill the rig halfway with grain alcohol or pure alcohol, depending on what you will do with the reclaim. ... Close the joint of the rig and its mouthpiece tightly, using your fingers or a towel. ... Pour the resulting residue on a dish and let it evaporate, as the alcohol will quickly disappear.More items...•
How do you liquify rosin?
To vaporize rosin from a cartridge, we need to make the rosin runny and less viscous than the commonly enjoyed badder, jam, or sappy consistencies. There are three ways to accomplish this transformation: adding terpenes to the rosin, mixing the rosin with a pre-made wax liquidizer product, or winterizing the rosin.
Can I make my own vape liquid?
In the simplest terms, making your own e-liquid involves mixing together the main elements that make up e-juice: base liquid of PG and VG, nicotine, and flavor concentrates. You don't necessarily need all of these, for instance, if you prefer your e-liquid to be nicotine-free or even unflavored.
What can I put in my vape if I don't have juice?
What Else Can I Put In My Vape Besides E-juice?WATER. Believe it or not, some people actually question whether or not they can vape good old-fashioned H20. ... ALCOHOL. ... FOOD GRADE OILS (OLIVE, VEGETABLE, CANOLA, COD LIVER, ETC.) ... HONEY, SWEETENED JUICE, & ESSENTIAL OILS.
Is reclaim already decarboxylated?
Eat it: Since the reclaim is already decarboxylated, eating it is a viable option and can produce some pretty strong effects. Some people eat it as is while others will drizzle it over their food or capsule it up to avoid the bad taste.
What temp does reclaim melt?
Make sure not to heat the reclaim in the oven with temperatures exceeding 157°C/314°F, otherwise, the THC will start to evaporate.
Why do I get so much reclaim?
Size Matters. In most cases, excess reclaim is a result of boilover: that point when a dab bubbles so much that it ends up cascading over the barriers into parts of your atomizer and e-rig where it doesn't belong. The first solution is pretty simple, though maybe not completely satisfying: drop smaller dabs.
Can you turn resin into vape juice?
The following types of cannabis concentrate will work for making e juice: distillate, CO2 oil, live resin, sauce, shatter, and rosin. Shatter is the most commonly used for making THC vape juice. In fact, the first two do not need anything added.
Can you use rosin to make vape juice?
Rosin Extracted THC Vape Juice If you're looking for a way to make your own THC vape juice, then you'll want to know how to use rosin extraction. This is one of the easiest and most effective ways to make your own THC e-liquid. To start, you can use any type of cannabis that has been decarboxylated (heat treated).
Do you have to Decarb rosin for vape juice?
You'll want to decarb your rosin before adding the terpenes, but after you've stirred them in, you're ready to fill your tanks. Enjoy!
How to make vape juice?
In the simplest terms, making your own e-liquid involves mixing together the main elements that make up e-juice: base liquid of PG and VG, nicotine, and flavor concentrates. You don’t necessarily need all of these, for instance, if you prefer your e-liquid to be nicotine-free or even unflavored.
What is DIY vape juice?
DIY vape juice: be the maker and vaper. DIY vape juice is the homemade version of retail e-liquid. The same ingredients are used, but with infinite flexibility and customization. DIY e-liquid is a creative and cost-saving solution to the growing uncertainty surrounding vaping in 2020.
How to mix DIY e juice?
Methods to mix DIY e-juice: weight and volume . There are two ways to mix DIY e-juice, and each comes with a set of pros and cons. Mixing by weight: with the use of a scale, each ingredient is introduced to the mix by weighing it and taking its specific gravity into account.
What are the ingredients in e-liquid?
Here is your checklist: Base liquid – Or in other words, vegetable glycerin and propylene glycol: the two most important ingredients in e-juice.
How to get rid of THC residue?
Heat will remove most of the residual THC, if you prefer a solvent-free method. It is harder work, using water as your lubricant. Run some boiling (be careful, friends) water through your rig and let it sit. Give it a good thorough shake to loosen as much of the reclaim as possible.
What is reclaim oil?
Reclaim is the brown, sticky, resin-like residue left-over in your rig, which can be up to 60% THC. Don’t let your residual shatter, budder, or hash oil go to waste. Find out 10 creative ways to use reclaim here!
How to make a rig with alcohol?
Standard vodka or liquor is not strong enough – get the highest proof you can find for best results. Mix the alcohol through the rig and let it sit for 10 minutes, or longer if there is a lot of build up, then shake it. Give it a good shake, shake hard! Pour the contents into a Pyrex or glass dish. You can leave the dish somewhere (covered in foil) and wait a day for the alcohol to evaporate, or you can sit the glass dish in another dish of water, and heat it. This will cause the alcohol to evaporate quicker. Then, simply scrape out the sticky reclaim and put it in a small silicon puck.
Can you throw away reclaimed THC?
There is no preparation other than to remove the reclaim from the device it is in, and consume it. Keep it simple, it is sticky and messy work, but well worth the effort. Throwing away your reclaimed THC is like throwing away a perfectly good mid-grade eighth. Don’t be a wasteful stoner! Give it to a friend in a need if you do not want it. The Weed Gods will one day shine down upon you with gratitude.
What is THC vape juice?
THC vaping juice, also known as e-juice, e-liquid, or vape oil, is the liquid that turns your bud to vapor when you heat it. It became popular after e-cigarettes hit the market. You can also purchase vape oil with nicotine or CBD.
How to use THC vaping juice?
You use your THC vaping juice in a vape pen. You need to fill a cartridge with the oil and insert it back into your pen. Sucking in activates the battery, which heats the juice and the vapor enters your mouth and into your lungs. Hold for a few seconds and exhale.
THC vaping juice effects
Vape juice with THC is highly potent. Cannabis bud contains from 12 to 35% THC, depending on the strain. Vaping juice contains 50 to 70% THC and can reach as high as 90%.
Why should you make your own THC vape juice
THC vaping juice can be difficult to find in stores, especially if you live in a state where recreational weed is still illegal. If you do find some, there can be a lot of additives reducing the potency.
How to make THC vape juice at home
After reading all of the benefits of THC vape juice, you’re probably wondering how to make THC vape juice? How can a dried piece of the plant turn into a potent oil that can be vaporized? It’s actually a lot simpler than it seems.
The final puff
THC vaping juice is a substance that can be vaporized that’s highly potent and flavorful. You use the oil in your vape pen and suck in the vapor to get high. It’s usually a stronger effect because of how concentrated it is.
How to make terpenes vaporizer?
Place your concentrate into your mixing container. Place it on top of your heating element. Heat the concentrate until it reaches a liquid state. Keep it at a lower power range that maintains that liquid state. Terpenes and THC will begin to vaporizer at about 315 Fahrenheit (156.67 Celsius), so it is recommended to keep it lower than that.
What concentrates are used to make e juice?
The following types of cannabis concentrate will work for making e juice: distillate, CO2 oil, live resin, sauce, shatter, and rosin. Shatter is the most commonly used for making THC vape juice. In fact, the first two do not need anything added.
What terpenes should I add to my THC e juice?
Terpenes are denseley concentrated and should be added minimally to your THC e Juice mix. Two popular terpene makes are Holy Terp and True Terpenes. Holy Terp does need to get an SSL certificate though, it is better security for credit card transactions.
What is BHO in e juice?
Butane Honey Oil (“ BHO “) concentrate, in the form of shatter or crumble, are the most popular concentrates that are diluted to make e Juice. Live resin, sauce, shatter, and similar concentrates, whether made through solvents or solventless, use the same mixing process as BHO to make THC e Juice. There are two additional steps ...
What are terpenes made of?
There are terpenes that are made from cannabis and those that are made from other sources. The cannabis ones are harder to get, but they are better if you can. Terpenes are denseley concentrated and should be added minimally to your THC e Juice mix. Two popular terpene makes are Holy Terp and True Terpenes.
Why decarb a BHO?
Decarbing your BHO can help it from getting crystalized in the cartridge later. Dewaxing BHO can help remove residual solvents and pieces of plant matter. This will make the vape run smoother and less likely to get clogged, but may be too advanced for the everyday user.
Can you mix terpenes with diluent?
Once the concentrate is in a liquid state you can mix in your terpenes and diluent. Remember terpenes are concentrates so use a small amount. The ratio of diluent to concentrate will vary based on the thickness of the concentrate. If it is a particular diluent made for concentrates, ask the maker of the diluent.
How to collect reclaim from a dab rig?
The first way is to pour the water out of your rig and then pick out the little goldish clumps. Chances are there won’t be many as the majority of reclaim will be stuck to the inside of your device. The second way to collect reclaim is to melt it out.
What is the residue left behind after smoking cannabis?
(Grant Hindsley for Leafly) If you’ve ever smoked weed from a pipe, you’ve seen the black greasy gunk form inside it. This substance is called resin , and it’s the residue left behind after you smoke cannabis flower.
What is the sticky substance inside a dab rig called?
A similar substance forms inside your dab rig when you smoke concentrates, only instead of resin, this yellow/gold/brown sticky substance is called reclaim.
How to get water out of a rig?
All you need is a torch and some wax paper: Pour the water out of your rig. Let it dry (you don’t want water in your dabs/reclaim) Remove the nail and hold the connector/dropdown over the wax paper. Torch the reclaim enough to liquify, and it will drip onto the wax paper.
Can you infuse food with reclaim?
To completely avoid that taste you can also infuse food with reclaim. If consuming reclaim doesn’t appeal to you, but having a squeaky clean bong does, you can also just collect your reclaim and toss it in the trash. Dante Jordan contributed to this article.
Can you get high from reclaim?
The short answer is: Yes, it is safe to consume reclaim, and yes, you will get high from it. According to MCR Labs, a state-certified cannabis testing lab in Massachusetts, reclaim still has the main active cannabinoids that promote physiological changes.
