How to Make Weed Vape Juice
- Decarboxylate the Cannabis Flower. Decarboxylating your cannabis flower, whether it’s CBD or THC-rich, ensures its...
- Create a VG/PG Mix. When your buds have cooled, you can saturate them in a vegetable glycerin and propylene glycol mix...
- Double Boil the Cannabis Mix. A double boiler will allow you to provide gentle but consistent heat to...
Full Answer
How to make your own DIY vape juice?
What you need to get started
- Determine the strength of the nicotine
- Extract nicotine from the container
- Transfer the nicotine to the bottle
- Measure and add your flavors
- Measure and add your PG /VG
- Secure the bottle
- Shake the bottle well
- Steep for a while then enjoy
How to make dabs into vape juice?
Step 3: Prepare your E-Juice
- Measure 1 Gram of Shatter and put it in the boiling glass. Now add 1 ml of liquidizer to the same boiling glass. ...
- Mix thoroughly and then put it on the heat source for about 10 seconds.
- Stir vigorously again until your E-Juice recipes is homogeneous and ready for use.
How to make your own CBD vape juice at home?
How to Make Your Own CBD Vape J uice Measure out your CBD crystals. Ok, Tony Montana, get out your scales and measure out 500 mg of CBD crystals. If not already, crush into a fine a powder. This is important. The smaller the particles, the easier they will dissolve in our solution and not be left in clumps. Those clumps can ruin your vape pen coil.
How to make vape juice with nicotine?
How to Make Vape Juice. Use LNW E Liquid Calculator to calculate recipe. Add Nicotine Base or Nicotine Salt. Add Propylene Glycol. Add Vegetable Glycerin. Add Flavoring. Shake Thoroughly.
How do you make your own vape juice ratio?
Sample E-Juice Recipes70/20 VG/PG blend (approximately 16 ml and 5 ml)Diluted nicotine (according to the strength, as desired)5 ml Coconut Milk flavoring.5 ml Chocolate Roll flavoring.3 ml vodka or distilled water.
Can you create your own vape juice?
In the simplest terms, making your own e-liquid involves mixing together the main elements that make up e-juice: base liquid of PG and VG, nicotine, and flavor concentrates. You don't necessarily need all of these, for instance, if you prefer your e-liquid to be nicotine-free or even unflavored.
How do you make rosin vape juice?
Mix the Everclear and rosin in a 10:1 ratio of alcohol to rosin and place on a heating pad set to low heat. We want just enough heat to help the alcohol and rosin to mix together thoroughly. Stir them together with a dab tool and within minutes you'll see the fats and waxes start to separate.
How do you make homemade vape juice?
How to Make Vape JuiceUse LNW E Liquid Calculator to calculate recipe.Add Nicotine Base or Nicotine Salt.Add Propylene Glycol.Add Vegetable Glycerin.Add Flavoring.Shake Thoroughly.
What can I put in my vape if I don't have juice?
What Else Can I Put In My Vape Besides E-juice?WATER. Believe it or not, some people actually question whether or not they can vape good old-fashioned H20. ... ALCOHOL. ... FOOD GRADE OILS (OLIVE, VEGETABLE, CANOLA, COD LIVER, ETC.) ... HONEY, SWEETENED JUICE, & ESSENTIAL OILS.
Can I put honey in my vape?
Heating up honey causes it to caramelize and bubble, not vaporize. Trying to vape honey would undoubtedly ruin the coil and be a complete mess in your tank, not to mention ruining perfectly good honey. Inhaling them into your lungs is extremely dangerous and should not be put in your vape tank.
Can you turn resin into vape juice?
The following types of cannabis concentrate will work for making e juice: distillate, CO2 oil, live resin, sauce, shatter, and rosin. Shatter is the most commonly used for making THC vape juice. In fact, the first two do not need anything added.
How do you turn shatter into vape juice?
Step 1: put a gram of shatter into a shot glass.Step 2: apply 1ml of Wax Liquidizer to the shatter in the shot glass.Step 3: put it in a microwave for about 10 minutes.Step 4: stir the mixture efficiently to remove the undissolved pieces.Step 5: make use of the syringe to extract the infused vape liquid.
What is Wax Liquidizer made of?
Wax Liquidizer is a proprietary blend of ingredients including Lab/Medical Grade propylene glycol or PG. Wax Liquidizer is a PG based proprietary blend that includes PG, PEG200, and PEG400. Recognized as safe by the FDA, PG is used in many foods, medical, and baby products.
Can I put water in my vape?
The answer to this question is no, you will not be able to make cool clouds and shapes with the vapor that comes out of the vape pen. The reason for this is that the vapor that comes out when you put just water in the vape will cool much too fast to produce large clouds, or sometimes any visual vapor at all.
Can I vape vegetable oil?
Vegetable oil and vitamin E can help deliver desired drugs to vapers. But they may also cause harm, especially if they're not heated up right. In theory, vape users should not be ingesting any liquid oils when they inhale, only the vapor from e-cigarettes that looks like white smoke.
Can you put food flavoring in a vape?
But it turns out the food concentrate drops can actually be used for vape juice - as long as they are properly diluted. According to Veppo Cig, vape juice is “a mixture of water, food-grade flavoring, a choice of nicotine levels or zero nicotine, and propylene glycol (PG) or vegetable glycerin (VG).”
What is e-liquid in a vaporizer?
Cannabis e-liquid is, effectively, the liquid that goes into a vaporizer which then blesses your lunges with potent smoke. Cannabis e-liquid is a very high potency form of marijuana, and making it at home can be a very economical way of smoking your stash.
Why doesn't vaporization occur when smoking marijuana?
The chemical process which takes place when marijuana is combusted (such as smoking it) doesn´t occur in vaporization because temperatures don´t necessarily get hot enough. So this step is important to make sure the THC is activated! Finely chop your buds. The finer they are the better!
How to make a jar of cannabis darker?
The mixture in the jar will get darker and darker as you continue to do this as the THC gets absorbed in the remaining alcohol. The more buds you use, the darker it will get.
How to make a weed tincture?
Put about 3.5 inches of water in a pot, and put the mason jar in it. Turn on a vent if your stove has one, and maybe open a window. In this step you are trying to evaporate some of the alcohol in the jar. Continually stir the cannabis during the process.
How to make a decarboxylated bud?
Put your decarboxylated buds into one of the mason jars. Start filling the mason jar with Everclear alcohol (or whichever high proof grain alcohol you have chosen) until the buds are just covered in the jar. Put about 3.5 inches of water in a pot, and put the mason jar in it.
Is e-liquid the healthiest way to use weed?
Jump To Section. Take extreme care! Cannabis E-Liquid and vaporizers have not become super famous over the last couple of years for no reason. Vaporizing is a discrete and arguably the health iest way for you to use weed. Cannabis e-liquid is, effectively, the liquid that goes into a vaporizer which then blesses your lunges with potent smoke.
What Is Weed Vape Juice?
Weed vape juice is a concentrated cannabis extract featuring thinning agents like propylene glycol, vegetable glycerin, and terpenes used to create a runnier e-juice consistency, which is easier to vaporize by your vape pen’s heating unit.
Ingredients and Equipment
Ready to make THC vape juice to puff away on your vape pen? Here is exactly what you will need, from start to finish.
How to Make Weed Vape Juice
If you follow these steps, you should have your very own vape juice in no time.
Learn the Art of Cannabis Infusions at CTU
Go beyond vape juice recipes and expand your infusion skills by enrolling in Cannabis Training University’s online industry training and receive a cannabis cooking certification. Whether you want to improve your hobby or get hired in the industry, CTU can empower you with an in-depth cannabis education. Enroll today!
How to make e-juice from weed?
The first step in making your cannabis e-juice is to decarboxylase the weed. Cannabis only becomes psychoactive when heat is applied converting THC-a into THC. Your vaporizer might not reach the necessary heat to make this conversion happen. In order to do this, you simply need to put your weed in the oven on a Pyrex bowl. You could also use a baking sheet or even aluminum foil.
How long to cook e-juice in oven?
You could also use a baking sheet or even aluminum foil. You’ll place it in the oven at about 225-250F and for only roughly 15 minutes. You don’t want to vaporize all the THC out of the weed rendering your e-juice worthless.
How to get rid of alcohol in a pot?
Once the liquid is dark-ish you can remove the jar from the pot. Now once more, fill the jar with alcohol to the top. Once you have done this you’ll begin filtering out the plant matter from the concoction.
How much water should I put in a jar of alcohol?
You won’t cover the jar with a lid but rather will place it into a pot of water with about 1.5-2 inches of water and bring it up to boil. This will allow you to heat up the concoction without making it explode because you have to remember that alcohol is flammable when heated.
How to make vape juice?
In the simplest terms, making your own e-liquid involves mixing together the main elements that make up e-juice: base liquid of PG and VG, nicotine, and flavor concentrates. You don’t necessarily need all of these, for instance, if you prefer your e-liquid to be nicotine-free or even unflavored.
What is DIY vape juice?
DIY vape juice: be the maker and vaper. DIY vape juice is the homemade version of retail e-liquid. The same ingredients are used, but with infinite flexibility and customization. DIY e-liquid is a creative and cost-saving solution to the growing uncertainty surrounding vaping in 2020.
How to mix DIY e juice?
Methods to mix DIY e-juice: weight and volume . There are two ways to mix DIY e-juice, and each comes with a set of pros and cons. Mixing by weight: with the use of a scale, each ingredient is introduced to the mix by weighing it and taking its specific gravity into account.
What are the ingredients in e-liquid?
Here is your checklist: Base liquid – Or in other words, vegetable glycerin and propylene glycol: the two most important ingredients in e-juice.
What Is Cannabis E-Juice?
Cannabis e-juice, also known as vape oil, is a concentrate containing a high concentration of cannabinoids, terpenes, and a thinning agent used to create the right oil viscosity to be vaporized. A portable vaporizer’s heating device heats the oil just enough to produce a vapor which is then inhaled through the mouthpiece.
What Do You Need to Make a DIY Cannabis E-Juice Recipe?
For this cannabis e-juice recipe you will either need cannabis flower buds, trim, or cannabis concentrates. Using concentrates can speed up the e-juice production process. Here is what you will need to make cannabis e-juice at home.
Cannabis E-Juice Recipe in 5 Easy Steps
Making your own cannabis e-juice at home is easier than ever. Our cannabis e-juice recipe is an alternative to traditional nicotine e-juices. Here are 5 steps to our easy cannabis e-juice recipe.
Learn More Cannabis Recipes at Cannabis Training University
Cannabis flower buds, trim, and concentrate can be transformed into a variety of products including baked goods, topicals, transdermal patches, capsules, beverages, tinctures, and so much more. Learn how to create all of these products at home by enrolling in Cannabis Training University’s online marijuana college.
How to make e-juice from weed?
But the easiest (and fastest) way to make e-juice is to start with a good shatter, wax or other high-quality extract.
How to make infused e-juice?
How to make marijuana infused e-juice. There are several methods for the average person to get a vape pen full of e-juice. You can make it in a Magical Butter Machine with trim or bud , which Old Hippie gives a great tutorial for on Beyond Chronic. You can make it in a crock pot by infusing your marijuana into vegetable glycerin.
Why is marijuana so versatile?
Why is marijuana so versatile? It’s because it can be turned into something that can be used in nearly any situation. Sure it’s fun to sit around and smoke flowers at home, but try medicating with a fatty in a restaurant or on an airplane and see where that gets you. The real value in marijuana, besides the fact that it has been proven to be one of the safest substances on the planet, is that nearly anyone can not only grow it, but remove its core ingredients – its essence – and put it into something else. Want to treat regular migraines or the symptoms of menopause? Infuse some coconut oil and start baking. Want to medicate on your flight to Denver? Turn your wax or shatter into e-juice and put it in a vape pen.
Why is marijuana illegal?
It’s because it’s such a simple, versatile medication that the average person can produce it and use it almost anywhere for thousands of ailments. Far more than just a plant, marijuana is the biggest threat the pharmaceutical-industrial complex has ever faced.
Is marijuana safe to grow?
The real value in marijuana, besides the fact that it has been proven to be one of the safest substances on the planet, is that nearly anyone can not only grow it, but remove its core ingredients – its essence – and put it into something else.
Does EJmix have a separate?
It’s also completely stable once mixed, meaning it won’t separate, and works as well with crystal-clear shatter as it does with crumbly waxes. If you have access to some hash oil EJMix makes turning it into a an e-juice for your pen vaporizer a no brainer.
How to make a weed vape juice?
Stir the mixture frequently while simmering. When done, remove the jar from the pans and let cool slightly. Strain the mixture through the cheesecloth into your weed vape juice container. Give the cannabis mixture one more squeeze with the rice press to remove any remaining liquid.
What is THC vape juice?
THC vape juice is used in weed vape pens or E-Juice vaporizers. A vape device is made up of a mouthpiece, atomizer, and cartridge that holds the e-liquid. Vape pens are thin, pen-like structures. They are a discrete way to carry your vape device with you. Vaporizers, also called mods, are more substantial and less inconspicuous.
How to make weed oil thicker?
Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin. You want a bit more PG to create a thicker oil. If you are sensitive to PG, make the mixture with more VG. Stir the mixture thoroughly.
How long does it take to strain a marijuana vape?
If the blend becomes dry, add more of the propylene glycol and vegetable glycerin mixture. After three months, strain the mixture through a cheesecloth into a container for your marijuana vape juice. Place the strained mixture into a rice press to squeeze out any remaining liquid.
What are the ingredients in vape juice?
The main ingredients used in the base of vape juices are propylene glycol (PG) and vegetable glycerin (VG).
What is e juice?
E-juice, also known as e-liquid or vape oil, is the component of the vaping device that encompasses all the flavors, any nicotine, CBD, or THC. When heated, this juice is also the product that creates the vapor, giving the device its name. There are a wide variety of e-juice flavors to choose from. They can be mixed and matched to suit your ...
How to can decarbed marijuana?
Place your decarbed marijuana into a dark-colored jar that has a tight-fitting lid. Mason jars for canning are an excellent choice. The dark color protects cannabis from sunlight that can weaken the potency of the mixture. Cover the decarbed weed with a 60/40 mix of the propylene glycol to vegetable glycerin.
How to make a vape with a kettle?
I boil a kettle then add a small amount of boiling water to a bowl and set the vial with the mixture in it for a while until they can easily mix. leaving a smooth golden e-liquid. Now your e-liquid is ready to use, Just transfer it into your bottle or vape cart using a syringe and you’re good to go.
What is the liquid that is used to extract THC from cannabis?
And all of them carry the same principals of extracting the THC oil from the cannabis buds and mixing it with a carrier liquid such as propylene glycol (PG), Vegetable Glycerine (VG) or some form of Wax Liquidizer for extracts.
How to make a rice press?
10. Place your rice press over another glass jar or jug and line it with a couple of layers of cheesecloth. 11. Pour your mixture into the rice press, cover with some more cheesecloth then squeeze until your heart is content. Your mix should run into the jar leaving a clean THC vape juice. 12.
What is a dry herb vaporizer?
If you are unfamiliar with what a dry herb vaporizer is, here’s a simple answer: “A dry herb vaporizer, is a vaporizer that is for vaporizing dry herb, aka flower. ”. These vaporizers are generally easy to use and come in many different styles from portable to desktop vaporizers.
How much cannabis should I mix with liquid?
Here’s what you need! Cannabis flowers – As a rule of thumb you can mix approx 1/4 (7grams) of an ounce with approx 80ml of liquid (adjust as required for different strengths). Food grade Vegetable Glycerin (VG) and Propylene Glycol (PG) Mix. Baking tray or Pyrex oven safe bowl. Aluminum Foil.
Is THC vape oil legal?
For the reason that it has many advantages over smoking. If you find yourself lucky enough to stay in a country or state where Cannabis is legal , you may have seen the rise of Weed-based Vape Juice in Dab Pens.
Community Q&A
Include your email address to get a message when this question is answered.
Tips
When you’re buying ingredients to make vape juice, such as terpenes or commercial liquidizers, check to see if the product comes with a Certificate of Analysis (COA) to verify the ingredients. This will help you avoid any harmful additives or contaminants that could make you sick. [74]
Warnings
Never add vitamin E or oils (such as essential oils, cooking oil, or mineral oil) to your vape juice. According to the CDC, the use of vitamin E in vape liquids has been linked with serious lung injuries. [75]
About This Article
This article was co-authored by Jamie Corroon, ND, MPH and by wikiHow staff writer, Megaera Lorenz, PhD. Dr. Jamie Corroon, ND, MPH is the founder and Medical Director of the Center for Medical Cannabis Education. Dr. Corroon is a licensed Naturopathic Doctor and clinical researcher. In addition to clinical practice, Dr.