how to make high thc vape juice

DIY THC Vape Juice

• Chop your plant matter and decarboxylate it in a 230℉ oven for 35 minutes.
• Place the decarboxylated cannabis in a quart (32-ounce) mason jar.
• Pour in 32 ounces of the highest-proof alcohol you can get. ...
• Cover the jar tightly. ...
• Shake well.
• Place the mason jar in a brown paper bag and store in a cabinet or closet. ...

More items...

Full Answer

How to start making your own vape juice?

Steps

• Preheat the oven to 250℉ (121℃).
• Next, grind the cannabis buds. ...
• Get a baking tray and spread your ground cannabis across it evenly. ...
• Once the oven is heated, pop the baking tray in.
• The next step involves the PG/VG. ...

More items...

How to make dabs into vape juice?

Step 3: Prepare your E-Juice

• Measure 1 Gram of Shatter and put it in the boiling glass. Now add 1 ml of liquidizer to the same boiling glass. ...
• Mix thoroughly and then put it on the heat source for about 10 seconds.
• Stir vigorously again until your E-Juice recipes is homogeneous and ready for use.

How to make your own vape juice with household items?

How to Make Vape Juice: A Beginner’s Guide to DIY

• DIY vape juice: be the maker and vaper. DIY vape juice is the homemade version of retail e-liquid. ...
• The easiest way to make vape juice. ...
• Ingredients to avoid. ...
• E-juice calculators: an essential tool. ...
• Tips and tricks of DIY e-juice. ...

How to make your own CBD vape juice at home?

How to Make Your Own CBD Vape J uice Measure out your CBD crystals. Ok, Tony Montana, get out your scales and measure out 500 mg of CBD crystals. If not already, crush into a fine a powder. This is important. The smaller the particles, the easier they will dissolve in our solution and not be left in clumps. Those clumps can ruin your vape pen coil.

How do you make THC wax liquid?

Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.

Do you need to Decarb vape oil?

Why do we have to decarb it to use in vape oil when we don't have to decarb rosin to dab it? Because dabbing uses higher temperatures, where vaping uses very low amounts of heat. The heat from vaping isn't enough to decarb it, just enough to turn the oil into a mist you can inhale.

How do you make homemade vape juice?

How to Make Vape JuiceUse LNW E Liquid Calculator to calculate recipe.Add Nicotine Base or Nicotine Salt.Add Propylene Glycol.Add Vegetable Glycerin.Add Flavoring.Shake Thoroughly.

How do you make rosin vape juice?

Mix the Everclear and rosin in a 10:1 ratio of alcohol to rosin and place on a heating pad set to low heat. We want just enough heat to help the alcohol and rosin to mix together thoroughly. Stir them together with a dab tool and within minutes you'll see the fats and waxes start to separate.

Is CO2 oil Decarbed?

Decarboxylation of Cannabis in a CO2 Extraction Process Decarboxylation is an integral part of the extraction process, unless the end product will decarboxylate upon use (dabbing products, edibles, etc.) will “decarb” as they are heated. Decarbing is the only real chemical process in the whole extraction.

Can I put honey in my vape?

Heating up honey causes it to caramelize and bubble, not vaporize. Trying to vape honey would undoubtedly ruin the coil and be a complete mess in your tank, not to mention ruining perfectly good honey.

Is it OK to vape water?

When you vape water, the hot steam tends to condense in your mouth. It can burn the lips, tongue and pharynx. But by the time it reaches the lungs, the vapour turns to body temperature doing little to no harm. However, regular water vaping does not guarantee harmless effects.

Can you use water as vape juice?

At worst, this could burn your airways or mouth. At best, you'll just be inhaling a little steam. Plus, vaping water won't produce the thick clouds that people who vape are usually after, since those come from propylene glycol (PG) and vegetable glycerin (VG).

How do I turn my vape into concentrates?

0:311:36First take a gram of shatter. And mix it with two millimeters of wax. Liquidizer. Just put it in theMoreFirst take a gram of shatter. And mix it with two millimeters of wax. Liquidizer. Just put it in the microwave for 10 seconds. It's really that easy.

How to make THC e juice?

Most of these processes involve the extraction of the THC oil from cannabis bud and then mixing with the carrier liquid – like vegetable glycerin (VG), propylene glycol (PG) and some other kinds of wax liquidizer.

What strain of vape juice is best for CBD?

If you want to make CBD vape juice, you might want to start with a strain with high C BD and low TH C; strains like ACDC, Canatonic, or Harlequin. CBD e juice is preferred by users who do not want to feel the high effects derived from using THC. On the other hand, if your goal is to get high, then you might want to go for a strain with ...

How to heat up a pot of cannabis?

Ensure there is enough of the mix to cover all of the cannabis buds. Pour water into a bigger pot, and also add water to a second pot before placing in the big pot. Place the pot on the stovetop and heat until you reach a temperature of 220℉ (105℃). This is where access to an accurate thermometer would be very useful.

How to make a VG bud?

Preheat the oven to 250℉ (121℃). Next, grind the cannabis buds. It is better if the grind is fairly uniform. Get a baking tray and spread your ground cannabis across it evenly. Then cover the entire mass with foil. Once the oven is heated, pop the baking tray in. The next step involves the PG/VG.

How long does it take to make e juice?

For instance, if you are going to produce vegetable glycerin fairly quickly, you will need a minimum of 3-4 hours for this process – and about three months if you are going for the distilled option.

Can you vape with high THC?

On the other hand, if your goal is to get high, then you might want to go for a strain with a high THC content to produce your THC vape juice.

How long does it take to make THC vape juice?

Long-term steeping or extraction is an easy way to make vape juice with THC. But it also takes the most amount of time, as you need around three months to do complete the process.

How to make a VG bud?

Water. To get started, grind and decarboxylate your buds, just like you would in the first step. Prepare your PG/VG solution, including any masking flavors. Then let the buds cool down, and pour in your solution in the jar until all the buds are fully submerged.

Can you vape THC juice?

How to Make THC Vape Juice At Home. Vaping has become another acceptable way of consuming cannabis. It does not have the irritation you may get when smoking, as it poses as a less risky alternative to the usual burning of dried material. You get the same hit and flavor in a healthier alternative. Now, vaping THC-infused juice gets even better ...

Can you use cheesecloth to vape?

The cheesecloth will serve as a filter to keep the particles of your buds from mixing into the final juice. You can now use this THC vape juice. You can use a syringe to apply to your e-cigarette or vaporizer.

Can you fine tune THC in juice?

You Can Fine-tune the Amount of THC in your Juice. You can get the right amount of high. You don’t get short -changed, and you don’t get too heavy-headed after. You get the right amount of THC that you prefer every time.

Do you need to mix PG/VG?

You will need to mix in more PG/VG solutions during this phase, but don’t overdo it to prevent potency loss.

Can you get too high with THC?

You can get the right amount of high. You don’t get short-changed, and you don’t get too heavy-headed after. You get the right amount of THC that you prefer every time.

How long does THC vape juice last?

1. THC Vape Juice – Long-term THC extraction with Propylene Glycol (PG) and Vegetable Glycerine. (VG) (up to 3 months).

What is the liquid that is used to extract THC from cannabis?

And all of them carry the same principals of extracting the THC oil from the cannabis buds and mixing it with a carrier liquid such as propylene glycol (PG), Vegetable Glycerine (VG) or some form of Wax Liquidizer for extracts.

How to make a rice press?

10. Place your rice press over another glass jar or jug and line it with a couple of layers of cheesecloth. 11. Pour your mixture into the rice press, cover with some more cheesecloth then squeeze until your heart is content. Your mix should run into the jar leaving a clean THC vape juice. 12.

What is a dry herb vaporizer?

If you are unfamiliar with what a dry herb vaporizer is, here’s a simple answer: “A dry herb vaporizer, is a vaporizer that is for vaporizing dry herb, aka flower. ”. These vaporizers are generally easy to use and come in many different styles from portable to desktop vaporizers.

Which is the quickest vape oil?

Overall these methods are pretty effective, but the Rosin extraction Vape Oil is the quickest and cleanest if you already have the concentrates.

What temperature should a pot be on the stove?

Then add the pot to the stovetop and allow it to heat until you reach a constant temperature of 220℉ (105℃). This is where your accurate thermometer comes in handy.

Can you buy cannabis in a vape?

In some places, it isn’t possible to purchase Cannabis in any form for one reason or another so your only option would be to make your own THC Vape Juice.

How to make a VG e juice?

The instructions: In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. Cover it with parchment or wax paper to keep it from sticking to the spoon. Melt your wax.

How much THC is in a glob of wax?

If you have a glob of wax that weighs in at one gram, and that wax is 80% THC, then the dose will measure out to 800mg of THC.

What does E juice mean?

Just as a clarification, the “E” in THC E juice stands for “electronic” — meaning it can be vaporized using an electronic device like an e-cig or liquid vaporizer. The process of making one is relatively simple and it involves just a few tools that you may already have.

How to flatten a gram of hash oil?

In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. Cover it with parchment or wax paper to keep it from sticking to the spoon.

How long to stir VG/PG mix?

Begin adding drops of your VG/PG mix (start with about 30) and stir for about a minute. The wax and the VG/PG mix should be completely incorporated.

Can you put THC in a vaporizer?

Place your THC-infused e-juice into your vaporizer and enjoy!

Can you vaporize THC E juice?

However, anyone with an authentic liquid pen vaporizer or box that handles e-juice can vaporize THC E juice easily. Just as a clarification, the “E” in THC E juice stands for “electronic” — meaning it can be vaporized using an electronic device like an e-cig or liquid vaporizer.

What is THC Vape Juice?

Before we make vape juice, let’s first get to know what vape juice is and why many crave it. Vape juice is also called e-liquid or e-juice and is a combination of water, alcohol or nicotine, flavors, and vegetable glycerin or propylene glycol.

Why Do Smokers Vape Cannabis?

Many consumers prefer to consume THC vape juice because this is concentrated THC. THC vape juice effects are very similar to smoking a very high THC weed strain.

Side Effects of Consuming THC Vape Juice

Before you make your THC vape juice, it’s important to learn about the possible side effects of taking THC vape juice. Because this is potent cannabis you will experience the following adverse effects

There are Three Ways to Make THC Vape Juice

Now that you know the advantages and some disadvantages of using THC vape juice and THC products, we can now focus on how to make vape juice. Here are the three different methods explained in great detail.

Some Ways to Preserve Freshly-made THC Vape Juice

You can keep your freshly-made juice in a small glass preferably in small amber glasses with a tight lid. This will protect the contents from degradation. Commercially-prepared vape oils are mostly inside amber or dark glass bottles, the kind used in keeping medicines and supplements.

Is it Legal to Consume THC Vape Juice?

It’s hard to tell if THC vape juice is legal or not especially when you’re from the US. The best way to find out is to access marijuana laws in your area. Some states allow the use of medical marijuana only while some regulate the use of recreational and medicinal cannabis.

All About Safety When Making THC Vape Juice

Whenever you’re working with heat or flame, be sure to have a fire extinguisher ready. Use a rosin press, hair straightener, and stoves in a well-ventilated room. Always wear appropriate attire when “cooking” your THC vape juice.

What is the process of making a vape juice?

Before preparing the vape juice itself, it is important to decarboxylate the buds first – or to bake it in the oven for a given time. It will transform tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBD) – the dormant compounds found in raw cannabis flowers – into their activated forms: THC and CBD, respectively. Without this step, the final tincture will not produce the touted psychoactive or therapeutic effects.

How to make a weed brew?

Use a wooden spoon to stir the weed and alcohol mix slowly and continually. Alternatively, use a wooden stir stick. Doing so will boil off some of the alcohol in the brew. Keep at it until the buds get darker.

What is a vaporizer e-liquid?

THC and CBD vape juice or e-liquid is a highly concentrated substance that is primarily used in vaporizers. Due to its many benefits – including potency, rapid onset, and cost-effectiveness – it has become a smash hit in the 420 community. Another major appeal is that it can be whipped up at your home.

How to get oil out of a jar of brew?

Once the brew has cooled down, slowly pour it over the makeshift sieve to filter out the solids. You may have to use a butter knife or a flexible rubber spatula to scrape out the thick oil sticking to the bottom of the jar.

How to keep a kitchen ventilated during a vapor removal procedure?

During the procedure, keep the windows open to keep the kitchen ventilated and free of vapors.

What happens after letting alcohol evaporate?

After letting the excess alcohol evaporate from the mixture, it is time to filter out the solid plant matter and other unwanted substances from the oil.

Is vaping a good way to consume marijuana?

Like 5. 5 likes. Vaping is, without a doubt, one of the most popular ways of consuming marijuana – and rightly so. Not only does it provide fast-acting effects, but it also lowers the risk of respiratory infections and other smoking-related health hazards. This method of consumption is also discreet and cost-effective.

First Things First, Safety

Making and mixing e-liquids for vaping can be catastrophic if done the wrong way. Before embarking on any alchemist project, make sure that everything is safe. Handling pure nicotine should not be done on a whim. You should protect yourself and others from chemical poisoning, burns, and spills.

Important Safety Tips

Stay off pure nicotine. Pure nicotine is a lethal substance. Even 1 ml of the material can turn out to be lethal. Nicotine can seep into your body through the skin and cause fatal reactions. Pure nicotine spills are a danger to the people around you as well.

Experience Is Important

Dealing with e-liquids requires experience. Do not wake up one day and decide to make vape juice on a whim. You should understand how vaping works. It is recommended that you have at least six months to a year of experience with vaping products. The best bet for a beginner is mixing pre-made vaping liquids.

Major Extraction Methods Of Extracting THC Vape Juice

Simply put, THC vape juice is a liquid extract from fresh cannabis flowers. The liquid extract contains terpenes, cannabinoids, and flavonoids. There are several ways of extracting this liquid. Each of the three common methods has its requirements. The three common methods are:

Steps

First, choose a good quantity of buds and place them in between the parchment paper. The buds must be with the least amount of seeds and be as dense as possible. The ideal weight to get around 0.6 grams of THC vape juice is to use around 3 grams of buds.

Long-term Vegetable Glycerin Extraction Of THC Vape Juice

This process is long and requires a lot of patience. To avoid the health risks from illicit companies, it’s a good idea to do it yourself at home. The process involves low temperatures and long periods of downtime for the mixture to diffuse. To do this, you will need:

Steps

Using your hands, break up the flowers into bits. Do not use a grinder as the pieces will be too small, hence disrupting the process.

How to store THC vape juice?

Sometimes, it’s just best to buy a kit designed specifically to extract botanical plant material using VG solutions. This ensures everything is correct for the job: the VG solution (that it is made from the right oils and USP grade), syringes, and glass beakers; and ultimately reinforces the proper storage of the solution. It is senseless to go through all of this hard work only to spoil the resulting batch. Keep the THC juice in a drawer or other container that protect s from sunlight. However, it can be frozen (only it takes time to thaw completely and it is always advised that any juice entering the vape tank be room temperature).

Why do people vape?

There are a lot of reasons for wanting to vape marijuana instead of smoke it. Combustion is way worse for human health (as far as most research knows so far, vaping is far healthier). Obviously lighters burn at 3000-4600 degrees Fahrenheit, and people smoking small pipes or joints are inhaling this heat. This lung damage is outrageous and the pain is exactly what causes the coughing. Coughing is one of the main reasons people suspect heavier smoke in public. Turning normal marijuana bud into a vape-capable liquid allows it to be inhaled through a vape mod vaporizer. These $150-500 vaporizers are complex, impressive, and have many buttons and features…including the ability to control the voltage and temperatures. This allows users to keep the temperatures at a steady 365-405 degrees Fahrenheit…a drastic difference that makes the lungs smile wide!

How to make eliquid without alcohol?

The Best THC eLiquid Recipe Without Using Alcohol (guide, how-to) Step 1: Place the cooking pot on the direct center of the burner and pour the VG (or PG) solution into the pot. Add the marijuana contribution, being certain to evenly disseminate. The fork may come in handy for this.

What is VG in vaping?

Vegetable Glycerin (VG) is clear, and odorless. VG is also made from plant oils, most famously palm, soy or coconut oil (all of which are extremely good at absorbing THC for cooking with pot, so it makes sense that VG would be great for making the vaping juice best).

How long to heat pot for weed?

Step 2: Set heat to “2” or “slightly higher than low, but no where near medium heat” and set the timer to 30 minutes. Step 3: After the timer, attend the pot, gently stir with the fork to ensure all marijuana is evenly distributed throughout the oil. This is the first opportunity to assess the situation.

Can you vape dry weed?

It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped. It looks a lot like any other solution that would be in the vape tank. People always seem to assume it is nicotine. In marijuana-friendly states, some pot shops actually sell these ejuice tinctures. But it is possible to make your own marijuana THC ...

Can you make a liquid pot with a vape mod?

Could THC be extracted from weed, turned into an eliquid and used in a vape mod? It is possible to vape dry weed. And yes, it is possible to create a weed tincture that can be vaped.

Benefits of Making Your Your Own Vape Juice

Long-Term Steeping Or Extraction

Fast-Track Infusion

Rosin Extracted Thc Vape Juice

• This is one of the quickest ways to make vape juice infused with THC. If you own a rosin press or buy rosin, you may want to consider this step. Here are what you need: 1. If you will still extract rosin, follow the instructions of the manufacturer of your rosin press. Collect the rosin in a clean container. 2. Add 0.5 grams of your extracts and mi...

See more on trimleaf.com

Conclusion