Think of dabs as “bite-sized,” single-serving hits that are usually no bigger than your pinky nail (though that’s actually a lot!). You scoop a dab onto the nail using a dabbing tool and then apply a flame to turn the solid into vapor. Finally, you inhale as much of the vapor as possible.
Full Answer
How to make dabs at home?
Step 1 - Add 1 Gram of concentrate to a glass mixing vessel. A shot Glass works great! Step 2 - Add 1ml (about 35 drops) of EJ Mix to the Mixing vessel. Step 3 - Microwave for 10 seconds. …
Why can’t you decarb vape oil like dabbing oil?
· A glass stirring rod is the preferred item here. A cleaned off dab tool will do the job as well. A stainless steel stick of some sort will also work. Cartridge Or Pod To Put The THC …
Can you smoke Dabs in a bong?
Step 2: Roll up the parchment into a newspaper. Step 3: Wet the newspaper strip a little bit (damp rather than soaking). Step 4: Using an iron on a low setting, press and heat the parchment …
What is dabbing and how does it work?
Put the cannabis material in a glass jar and add enough alcohol to immerse all of the material. Then, stir slowly for about 10 minutes. Place a strainer over the glass dish and slowly pour the …
Can you turn dabs into vape oil?
The process of getting the Vape juice Start by placing the gram of wax into the microwavable jar. Then pour a few milliliters (according to the given instruction on the manual) of the liquidizer and pour it on top of the dab. Liquidizers come with different flavors; therefore, ensure that you add the one you prefer.
How do you turn shatter into vape?
Method 2: 60- Second Method (Use of microwave)Prepare all the materials.Place the shatter into the glass.Add 1 ml or 35 drops of diluent (Wax liquidizer) into the shot glass.Place it in the microwave for 10 seconds.Stir the mixture.Let it cool.Extract the mixture using a syringe and place it into the vape pen.
Can wax be smoked in a vape?
Users enjoy multiple ways of smoking wax including dabbing, vaping, and adding it to a joint or bowl. Each method also involves a variety of devices and techniques for the most efficient smoke.
How do you turn shatter into vape oil at home?
Step 1: put a gram of shatter into a shot glass.Step 2: apply 1ml of Wax Liquidizer to the shatter in the shot glass.Step 3: put it in a microwave for about 10 minutes.Step 4: stir the mixture efficiently to remove the undissolved pieces.Step 5: make use of the syringe to extract the infused vape liquid.
Can you mix shatter with e-liquid?
People use shatter because it is the most popularly used of all the THC concentrates. It features a golden and translucent wax structure. It is always an argument amongst most THC users. You can dab it, or you can turn it into e-juice.
How do you turn resin into vape oil?
They are just as effective at turning rosin into an e-juice that can be used with a standard vape tank. In fact, the liquidizer product is used in exactly the same manner to transform rosin into a vape juice. To turn rosin into vape juice, you need to simply add two milliliters of liquidizer to one gram of rosin.
Can you put dab wax in a pen?
The short answer is yes, wax and dab pens are the same, and both will vape concentrates such as wax; they just have different names. They use a solid “dab” of either wax, shatter, or budder. This is then heated and melted, and absorbed by a wick, allowing it to be vaporized.
What is wax Liquidizer made of?
What is Wax Liquidizer made of? Wax Liquidizer does not contain VG (vegetable glycerin), THC, nicotine, mineral oil or vitamin E. Wax Liquidizer is a proprietary blend of ingredients including Lab/Medical Grade propylene glycol or PG. Wax Liquidizer is a PG based proprietary blend that includes PG, PEG200, and PEG400.
What is pure Liquidizer?
Pure Liquidizer is one of the finest Liquidizers on the market. It is quickly becoming a go-to for many Liquidizer lovers. It is odorless & tasteless. It is made with a perfect blend of PG & PEG's & made & packaged in the USA. It contains NO THC, NO CBD & NO Vitamin E.
How long to cook a vial of juice at 160°C?
Back to the hot plate with your filtered vial of juice. This time you want 160°F (71.1°C) for about half an hour. We’re doing this to burn off the excess terpenes that we used for processing in the previous step.
How to filter out wax?
To do so, draw some of the mixture into a syringe, attach a syringe filter to the end, and squeeze it through. This takes some muscles! Do not apply enough pressure to break the syringe.
How long to decarb rosin?
Decarb your rosin in a glass vial on a hot plate. Set the temperature at 220°F (104.4°C) for 30-40 minutes. Be careful not to let the temperature get too high; Terpenes and cannabinoids tend to start breaking down around the 310°F (154.4°C) mark.
What is the process of decarbing?
Decarbing – Apply the heat without consuming it, producing a concentrate which contains THC freely.
What temperature should terpenes be in a concentrate?
This is actually going to be important in the next step. You want to keep the temperature at or below 150°F (65.5°C) so that you don’t damage the terpenes too.
Can you pop THC oil into a cartridge?
This goes through everything from start to finish. You will start with flower and end with THC oil you can pop into a cartridge.
Does shatter extract THC?
You can also see where things like shatter, which uses a solvent to extract the THC, makes sense now, since it’s less labor-intensive. Here is our guide to decarbing shatter, and another guide on making homemade vape juice.
How to use a dab tool?
Think of dabs as “bite-sized,” single-serving hits that are usually no bigger than your pinky nail (though that’s actually a lot!). You scoop a dab onto the nail using a dab bing tool and then apply a flame to turn the solid into vapor. Finally, you inhale as much of the vapor as possible. That’s dabbing in a nutshell.
What is wax dab?
Wax is a type of dab (the other being shatter ). And if you’re wondering why wax is called wax, the answer is really very simple: the stuff looks like earwax. Sounds gross, we know, but you’ll get over it after you’ve tried your first hit.
Why are dabs called bubble hash?
The dabs you make with ice water extraction are also called bubble hash because of the sieve-like screens (bubble bags) you use to separate the trichomes from the plant matter. Learning how to make dabs in this way is easy to do but requires a bit more time, patience, and elbow grease than other extraction methods.
How much THC can you get from wax?
Anywhere from two to four times over regular bud. Depending on the strain used to start, wax can clock in at 50-90% THC (or CBD). Even the strongest strain only hits around 25%. So you can see why dabbing is such a big deal: You can get seriously high with just one or two hits.
How high is dabbing?
And by concentrated, we mean really high in THC or CBD. How high exactly? Anywhere from two to four times over regular bud.
How to dry bud in oven?
1) Break up your bud just a bit (not too small). 2) Put it in an oven-safe container and dry the cannabis at 200 degrees Fahrenheit for 20 minutes. Please note, this is not decarboxylation. 3) Once the cannabis is sufficiently dry, put it and the bottle of alcohol in the freezer for three to five hours.
Can you use butane to make wax?
Butane is highly flammable and can explode (yes, explode!) with the smallest spark. That’s why we don’t recommend using butane extraction at home to make your own wax. There are much safer ways to produce some dab goo than to risk life, limb, and residence trying to emulate the pros and their fancy equipment.
How long does it take to vape a wax?
For oils with a shatter or sappy consistency this only takes about 30 seconds. For Crumble and sugar wax it may take up to a couple minutes. Step 5 - Use a syringe and blunt tip dispensing needle to extract the infused vape liquid and fill a disposable cartridge designed for thick oils.
How to make terpenes for flavoring?
Natural Terpenes for Flavoring (Optional) Step 1 - Add 1 Gram of concentrate to a glass mixing vessel. A shot Glass works great! Step 2 - Add 1ml (about 35 drops) of EJ Mix to the Mixing vessel. Step 3 - Microwave for 10 seconds. Step 4 - Stir until all the pieces of the wax dissolve.
How long does it take for wax to dissolve?
For oils with a shatter or sappy consistency this only takes a couple minutes. For Crumble and sugar wax it may take up to 10-15 minutes.
What is portable vape cartridge?
Portable vape cartridges are taking the medical and recreational weed markets by storm! They give users the ability quickly and discreetly enjoy their extracts without having to carry around pipes, papers, lighters, ect. A 2018 study found that 1 in 4 Cannabis users prefers using THC Vape Cartridges instead of flower, ...
How to make a sanding pot?
Slow method ( recommended) Step 1 - Make a double boiler using a pot filled with a few inches of water and an empty glass mixing vessel with a heavy bottom. Step 2 - Heat the water in the double boiler to about 175 degrees fahrenheit (about 80 degrees Celsius).
How long does it take for oil to soak in a cartridge?
Give oil about 15 minutes to fully soak into the wick / coils of the cartridge.
What tip do you use to inject concentrate into a vape?
Syringes With Slim Metal Or Needle Tips. You will need syringes that have that slim metal tip or are a needle in order to properly suck up then inject the concentrate e Juice into a vape cartridge or pod. Take a look at the tip I put on the syringe below. Just the tip baby, it is important.
How to make terpenes vaporizer?
Place your concentrate into your mixing container. Place it on top of your heating element. Heat the concentrate until it reaches a liquid state. Keep it at a lower power range that maintains that liquid state. Terpenes and THC will begin to vaporizer at about 315 Fahrenheit (156.67 Celsius), so it is recommended to keep it lower than that.
How to turn shatter into e juice?
There are a few different options out there for a diluent to turn your shatter (or other concentrate) into e juice. The easiest way is to get a pre-made diluent from places WaxLiquidizer or Shatter Batter. This option is preferred by many because it is easy. ANother great option that is completely terpene based is VISCOSITY Extract Luiquifier.
What concentrates are used to make e juice?
The following types of cannabis concentrate will work for making e juice: distillate, CO2 oil, live resin, sauce, shatter, and rosin. Shatter is the most commonly used for making THC vape juice. In fact, the first two do not need anything added.
Why decarb a BHO?
Decarbing your BHO can help it from getting crystalized in the cartridge later. Dewaxing BHO can help remove residual solvents and pieces of plant matter. This will make the vape run smoother and less likely to get clogged, but may be too advanced for the everyday user.
What diluents are used in cannabis juice?
Other common diluents are: Propylene Glycol (PG), Vegetable Glycerin (VG), Polyethylene Glycol (PEG),Medium Chained Triglycerides and Fractionated Coconut oil.
Is CO2 oil the same as distillate?
Distillate and CO2 oil are similar but may have different extraction methods. Often CO2 oil is just referred to as CO2 distillate. Below is a picture of a distillate syringe. You will note it needs a metal tip in order to properly do the THC vape juice injection process listed as the last step. All this needs is a tip.
What is a dab wax?
Cannabis dab wax is a soft, opaque oil that crystallizes and lacks transparency after extraction from the cannabis plant.
How to smoke weed with a pipe?
Stock the bowl with ground cannabis and drop the dab onto the weed. The idea is to avoid contact between the flame and the wax. The heat from the ground strain will help consume the dab into smoke you can inhale with a pipe.
How to consume wax?
Dabbing is one of the preferred methods to consume wax. Typically, you dab with a blow torch, glass pipe, and a nail (a small metal plate connected to the bang of the pipe). The torch heats the nail before placing the amount of wax to be “dabbed” or inhaled. This technique creates a combination of vapor and smoke of concentrated THC.
What is the strongest cannabis concentrate?
Shatter: One of the strongest types of cannabis concentrates with up to 80% THC. Resembles glass or hard candy.
What is the best way to clean a mouthpiece?
Germs can quickly accumulate on dabbing devices, so use rubbing alcohol to cleanse the mouthpiece after each use. A clean dabbing device will prevent mold, bacteria, and other undesirable pathogens from forming.
Can you wax medical marijuana?
Medical marijuana smokers may find immediate relief from chronic pain and depression from dabbing their recommended strains. Medical cannabis is doctor-prescribed, so it seems that medicinal users may be the aptest candidates for wax.
Do you need a separate atomizer for vaping?
Not all vape pens are up to this task, and you’ll need a separate atomizer for this. Place the dab with your collecting item in the atomizer and then slowly inhale to get the most of your wax.
What Are Dabs?
Dabs are potent cannabis concentrates that come in a variety of forms, including:
How to Dab Like a Pro
If you want to learn how to dab like a pro, we've got you covered. Follow our step-by-step process to start dabbing in no time.
How to Make Dabs at Home
Dispensaries carry a wide range of dabs that vary in color, potency, consistency, and purity. You can also make your own dabs at home using flower buds, hash, or kief. Here are a few easy and safe ways to make a DIY dab.
Become an Expert on How to Dab at Cannabis Training University
Ready to become a dabbing expert? Enroll in Cannabis Training University to learn all about cannabis plants, including how to use and make concentrates.
