What is the smok osub plus 80W TC starter kit?
The SMOK OSUB Plus 80W TC Starter Kit builds upon the original OSUB ecosystem, improving upon performance-driven out, fully-loaded chipset with power upgrade up to 80W combined with enlarged chassis and paired with the new Brit Beast Sub-Ohm Tank.
Why choose osub 80W baby mod?
More vaping data for you, such as VW/TC MODE, vaping effect, voltage, battery life, resistance value etc. Powered by one replaceable 18650 battery; and its snap-on battery cover is easy to slip and replace battery. Osub 80W Baby mod provides multiple types of protections to safe guard against potential risk.
How to change wattage on Smok mod?
Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. From here, you can then cycle through the output settings. How To Change Wattage In TC Mode: press the fire bar and the up button at the same time.
What heating elements does the osub plus 80W support?
The OSUB Plus 80W implements comprehensive temperature control settings, with support for Ni200 Nickel, Stainless Steel, and Titanium heating elements.
How do you clean an 80w Smok stick?
0:384:23How To Clean SMOK Alien TFV8 TFV12 Series Vape Tanks - YouTubeYouTubeStart of suggested clipEnd of suggested clipWater. Depending on how long it's been since the last time you've cleaned your tank you may want toMoreWater. Depending on how long it's been since the last time you've cleaned your tank you may want to add a little bit of hand soap to your bowl of water for a little extra kick of cleaning. Power.
How do you oil a Smok vape?
0:411:56Fill, Prime And Set Up SMOK Morph 219 Vape Kit | Vaporleaf - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo pop open the bottom door hatch there put in your batteries. Negative the negative and positive toMoreSo pop open the bottom door hatch there put in your batteries. Negative the negative and positive to positive secure the door screens coming on one two three four five turns the device on.
How do you fix a Smok vape?
If your SMOK vape isn't turning on, it could be a quick fix:Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use.Check the battery to confirm that it's properly inserted.
How do you clean a Smok vape cartridge?
The Simple Rinse:Fill a bowl with warm water.Detach tank from mod.Dispose of any e-liquid remaining in the tank.Completely disassemble your tank.Place tank components into bowl.Wash tank components in water until clean. ... Dry off each component with a paper towel.Let stand and air dry for 10-15 minutes.More items...•
Why is my SMOK stick 80w leaking?
Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter the leaking issue if the liquid on the coil hasn't been atomized on time with low wattage. Besides, please close all the airholes when you do not use it.
How do you open a SMOK vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
Why has my SMOK stopped working?
SMOK Wave Not Hitting If your SMOK Wave isn't hitting, the first thing that you should do is try charging the battery. It's likely that the battery is simply dead. If the battery is fully charged – or you're still unable to vape after charging the battery – the next thing that you should do is check the pod.
Why is my vape not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Why does my vape keep turning off?
Weak battery. Your battery may simply just be running out of power. Try switching to a fully charged battery and see if it makes a difference. If you are using a variable wattage device, try turning up the power.
How do you maintain a vape?
Looking After Your E-Cig & Vape BatteriesClean the Battery Contacts Regularly.Keep Batteries Out of Sunlight & Extreme Temperatures.Mark Your Batteries So You Know When To Replace.Don't Overcharge Your Batteries.Store Your E-Cig Batteries Carefully.Turn Off When not In Use (Not Applicable to Cigalike Kits)More items...
How do you take apart a Smok?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila. This is inside of your coil.
How do you unclog a vape pod?
Sometimes, you can simply jam a toothpick or safety pin through the small holes of the mouthpiece to dislodge whatever is clogging it up. This is especially useful if the clog is hard, due to crystallization of the e-liquid or burnt debris that takes on a resinous consistency.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
MORE DETAILED VAPING DATA
The clearly OLED screen combines with entirely new operation interface. More vaping data for you,
SNAP-ON BATTERY COVER
Powered by one replaceable 18650 battery; and its snap-on battery cover is easy to slip and replace battery.
MULTIPLE PROTECTION
Osub 80W Baby mod provides multiple types of protections to safe guard against potential risk.
DELRIN DRIP TIP
The delrin drip tip will bring increased airflow and provide you with powerful draw effects.
ADJUSTABLE AIRFLOW SYSTEM
Bring you an extremely open draw. Airflow can be adjusted freely by turning the ring at the base of atomizer.