how to maintain your vape mod

How To Maintain Your Pod Mod

• Use The Right Cartridges. All pod mods have cartridges that have been specifically designed for that vape device. For...
• Check For Leaks. Although all pod mods and cartridges are sturdy in their build, always check for leaks coming from your...
• Pod Mod Batteries. Pod mod batteries are internal, meaning that they’re not replaced when they...

Full Answer

How to clean your vape cleaner?

Vinegar is a highly acidic cleaning agent but must be thoroughly rinsed to prevent its smell from lingering. Some vapers prefer using a little bit of dish soap or lemon juice with water instead. Again, remember to rinse well as vaping dish soap is probably even worse than it sounds.

How do I Stop my vape from flooding?

Reduce your airflow – Inhaling too forcefully when you vape encourages flooding by literally pulling more e-juice into the chamber. This is easy to solve: inhale more softly, letting the coil and wicking do the work for you. If you’re still having issues, try reducing your airflow setting.

What should you do when your vape popping noise doesn’t stop?

The popping sounds should fade, leaving the ordinary, white noise-like hum of vaporization. At this point, you can puff away without fear of spitback. Turn up the power – If your wattage is too low, you might not be vaporizing e-liquid as quickly as your wick is supplying it.

What to do if your vape coils are not working?

The first thing you have to do is remove the wicks from your coils—you don’t want to burn them. If your coils are not that bad, a light dry burn will do the trick. Pulse the fire button a few times until you remove the remaining liquid, let them cool down and re-wick.

How do you maintain a Mod?

Put a small amount of isopropyl alcohol on your microfiber cloth (do NOT use alcohol on rubberized finishes) and wipe down the entire body of your mod, making sure to pay extra close attention to areas where grime or dirt can build up, like where you commonly touch the vaporizer when it is gripped in your hand.

How long do vape mods usually last?

It's all dependent on so many different factors which make it a challenge to try and work out. With that being said, however, there is a fair amount of evidence to suggest that the average lifespan of a vaping device as a collective set of pieces is around about six months.

How often should I clean my vape?

For heavy vapers, it's best to clean your vape tank once a week with a quick rinse. For moderate vapers, clean at least once every two weeks. This is about the same frequency that experts recommend replacing the coil, about every two weeks.

How do you maintain a vape tank?

How to Clean a Vape TankFill a bowl with warm water.Detach tank from mod.Dispose of any e-liquid remaining in the tank.Completely disassemble your tank.Place tank components into bowl.Wash tank components in water until clean. ... Dry off each component with a paper towel.Let stand and air dry for 10-15 minutes.More items...•

Should I turn my vape off when I'm not using it?

It is important to turn off your vape device when you are not using it. Otherwise, it might go off in your pocket or handbag. This constant and prolonged firing can cause your coil to burn out and e-juice to be wasted.

How many puffs Should a coil last?

On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.

Can you put water in a vape to clean it?

Water is a great way to wash off some of that old gunk and congealed e-liquid that's polluting your vapour. First, you'll need to empty your tank if it isn't already. Then, you'll need to fill up a bowl or cup with warm water (or microwave it).

Can I rinse my vape coil with water?

Here is how you should clean your replaceable coils: Let your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.

When should I replace coils?

However, there are several signs which indicate that it's time to replace your coils.Burnt Taste. The first and most prominent way to tell your coil needs changing is by experiencing an unpleasant burning taste in your vape.Bubbling Noise. ... Weak Flavour. ... Little Vapour. ... Leaking Device.

How often do you need to change coil in vape?

If you're a heavy vaper, using your e-cig many times a day, you might need to change the coil every couple of days. If you are a regular vaper but not particularly heavy, it could last a week or two. Irregular or casual vapers might find they need only change their coil every four weeks.

Can you clean a burnt coil?

So, carefully remove the coil from the hot water and submerge it in the cold water. With this, any remaining debris will fall off, and your coil will be clean again. If you have done this and still experience the annoying burnt taste vape, then you can clean it using vinegar or lemon juice in hot water.

What do I clean my vape with?

Everybody knows that vaporizers need regular cleaning. It's best to do it with isopropyl alcohol – quite a strong dissolvent.

A Guide For Proper Vape Gear Maintenance

All too often I see people having problems with a certain tank, mod, ejuice, etc. I thought to myself how do they have all these problems? My vape mods and tanks NEVER let me down and I have only ever had issues with a select few things, though, it must be noted, 90% of said “issues” were my own fault.

Vape Tank Maintenance

Taking care of your tank is probably the most important thing you can do to keep you vaping. First off you should go by the old saying, “If it ain’t broke don’t fix it.” Meaning, if nothing is wrong with your tank then don’t try to alter or fix it.

Vape Mod Maintenance

Your mod is the heart of your vaping setup, without it your vape is worthless. So, caring for your mod is of the utmost importance.

Battery Safety and Maintenance

I will not go in depth with this section too much. You can check out our review on battery safety for complete information. For basic safety you should never carry batteries in your pocket without a battery case.

How to clean pod mods?

You only need to clean the body of your device. Soak it in cleaning alcohol for a few minutes, dry and see the results for yourself. This process should rub off any gunk that has built up in the connecting areas of your device. For an even more thorough clean use a cotton bud or swab to clean out stubborn grime.

What does it mean when a pod mod battery breaks?

Pod mod batteries are internal, meaning that they’re not replaced when they break. This makes it even more crucial that you care for your pod mod's internal battery and ensure that it is kept healthy.

Can you charge a pod mod with a USB cable?

Almost all pod mod internal batteries are charged using a micro USB cable, but you shouldn’t use any old one on account of the different flows of charges through the wire. If you exceed the voltage or watts charging your device through your cable, you could end up damaging the electronics of your pod mod.

Can a UK vape juice leak?

Although all pod mods and cartridges are sturdy in their build, always check for leaks coming from your cartridge. Leaking UK vape juice can clog up the connection between the battery and the coil, and lead to a weaker output.

Can you leave a vape charger unattended?

Further to proper charging cables, never leave your device unattended when recharging. Unattended charging is one of the key factors in electronic fires caused by vape devices. Moreover, only keep your device charging until it’s full. Overcharging can actually reduce the life of your battery.

What is a clean vape?

A clean vape is a happy vape. A clean vape is the simplest way to get optimal performance. Although the ingredients of vape juice will generally not stain your equipment, residue will accumulate, and the buildup will eventually affect the performance of your favorite vape. Vegetable glycerin and some darker ejuice flavorings are notorious ...

How to clean a vape tank with ultrasonic cleaner?

Using an ultrasonic cleaner is not a complicated process. Just fill it with water, put all of the parts of your vape tank inside and run it until everything is clean. You could add a couple of drops of dishwashing liquid in your ultrasonic cleaner, but it’s not necessary.

How to clean coil heads?

If you still want to clean your coil heads, then you can follow the old soak and rinse method. Let your coil soak in ethanol, vinegar or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.

How to clean AIO vape pen?

The safest and easiest way to clean an AIO vape pen is by using a Q-tip. Soak a Q-tip in propylene glycol or distilled water and wipe the inside of the tank section thoroughly. For even better results, go over it once more with a dry Q-tip. This way you will be able to remove most of the gunk effectively.

What flavorings are used in e-liquid?

Vegetable glycerin and some darker ejuice flavor ings are notorious for gunking up coils, as are most of the sweeteners used in e-liquid manufacturing. A gunked up coil will have lower flavor and vapor production and can make your vape taste burnt.

How to clean a septic tank in microwave?

Take your cup or bowl and fill it with water. Place it in the microwave for about two minutes. In the meantime, rinse the parts of your tank under the sink, to get the process started. Next, take out the cup or bowl from the microwave and place your disassembled tank inside of it.

How to clean a tank?

The cleaning agent rinse 1 Baking soda is a good cleaning agent that can be used to get tanks sparkling again. 2 Ethanol, aka grain alcohol, is yet another highly effective substance for cleaning. Don’t get this confused with Isopropyl alcohol which should not be used on the inside of your tank. 3 Cheap Vodka is not a household item, but chances are you can find it at the grocery store. It will do the job and won’t cost you much. 4 Vinegar is a highly acidic cleaning agent but must be thoroughly rinsed to prevent its smell from lingering.

Why You Need To Maintain A Pod Mod

So if it’s so easy to use and its cartridges are simply replaceable, why do you need to give it any TLC at all? Pod mods are generally quite small and lightweight which means that their circuitry can be quite fragile.

Cleaning Your Cartridge

Cartridges might be replaceable, but they shouldn’t be ignored. If you’ve picked up an old pod that still has juice in it, make sure to dust off any dirt or grime that it’s accumulated, especially around the area that connects to the vape circuit. You can do this with a dry paper towel.

Cleaning Your Connector

A dirty connector can wreak havoc on the taste and effectiveness of your vape device. Use a cotton bud or paper towel to get any dirt that might have accumulated on the connector teeth and ensure that your vape is tasting and working as normal.

Charging Your Pod Mod

Make sure that you do not leave your pod mod charging overnight, and always ensure that you are using the cable that the device came with to do so.

Why does my vape tank leak?

Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

Why do multi strand coils pop?

Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.

What does it mean when a juice tank is not airtight?

Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.

How to prevent juice from leaking?

Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.

Can you fix a wick on a RTA?

Fix your wicks – If you’re using an RTA and spitback is a problem, you may need to re-wick your coils. It might take some experimenting, but the aim is to cover the channels leading from the tank to the chamber without completely blocking them with densely-packed wick.

Can you shut off airflow on a vape?

Check your airflow – Always make sure the airflow holes are fully closed when filling. When in use, make sure the airflow is open enough to allow you to vape without having to take strong inhales.