(1) Press the UP and DOWN buttons simuitaneously to lock or unlock thewattage adjustment function; (2) Press the Fire Key and UP button simultaneously to switch between thesix theme colors; (3) Press UP or DOWN Button to adjust the temperature or wattage settings.
Full Answer
How to vape in temperature control mode?
To vape in temperature control mode just attach the tank to your mod and select the TC profile from the menu or via the shortcut specified in the manual. Then you will need to lock the resistance at room temperature. This is another very important aspect on which depends the whole experience.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
What is the temperature limit on a vape?
It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C). The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature.
How do I Turn on and unlock my smokvape?
Here’s a quick rundown of how to turn on and unlock your SMOKvape and what to do if you run into a problem. First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do you lock a Smok vape?
3:548:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
How do you set the temperature control on a vape?
How to vape in TC. Put your mod into TC mode and select the corresponding wire type for the coils you have. If the mod has a TCR you can enter the exact TCR value. After that, ensure that your mod and tank are both at room temperature so the temperature readings will be more accurate.
How do I change my Smok vape settings?
0:232:16SMOK Nord 2 Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd when you're wanting to adjust the wattage. Press the power button three consecutive times andMoreAnd when you're wanting to adjust the wattage. Press the power button three consecutive times and then continue pressing it to cycle through the watts.
What is power lock on Smok?
Using the Smok M80 is very simple. It features a 5 click lock system to prevent accidental misfires while your device is stored. To lock or unlock the device press the main fire button 5 times in quick succession. You can power your device off to conserve battery life by entering the menu system.
What is temperature control mode?
Temperature Control (TC) mode allows you to set a specific temperature value on your mod at which your e-juice will be vaporized. Your mod will adjust its power output according to the set temperature value so that the coils temperature will remain constant and under control.
What wattage should I vape at Smok?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
How do you lock a Smok Nord 50W?
Once you have selected wattage, it will stop flashing and the power will be locked in. Simply press the button to vape. It isn't an automatic draw activation so you will need to use the button. The display screen is clear to read on the Nord 50W.
How do you lock the watts on a Smok mag?
Accidents do happen, you never know. To lock the SMOK Mag, simply click the trigger five times in succession (just as you do when unlocking).
How do you lock a Smok R kiss?
How To FillHold the tank firmly and push the locking button.Move the top cap out counter clockwise.Fill with e-liquid through the small kidney shaped hole.Close the top cap and push until the locking button clicks into place.
How do you lock and unlock a Smok vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you lock a Smok in Nord 4?
Switch on the Nord 4 by pressing the fire button five times. Another five to turn the device off. Tap the fire button again three times to lock the device, another three to unlock.
How do I unlock my vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
Choosing Coils
Today, there are a wide range of coils available specifically for temperature control devices. For the most part, you will be working with Ni200 or Stainless Steel (SS316L) coils. Hopefully, you checked your device before you brought it home to ensure you have the correct type of coils on hand.
Selecting Your Mode
The next step in your setup process is to select the temperature control mode you will be using. Depending on your device, this can go several different ways. You may need the assistance of your user manual to figure out the menu for the first time.
Base Settings
In order to ensure that your device is functioning properly and that all temperature control operations are accurate, you first need to lock in your resistance at room temperature. Setting a base line temperature without electricity going through the coil will establish all temperature sensing as your coils heat up.
Getting in the Groove
If you are working with a high powered device like the Vex 150 TC Mod, you have plenty of room to work with, so start slow and take your time. At each interval, stop and take a few hits.
For Next Time
Now that you have set up your temperature control device successfully for the first time, you’ve got a good feel for the way it’s done. It may be slow going at first, but you will get familiar with the menu quickly and soon you will have a good idea of what settings give you the best results so you can narrow down your search for the perfect vape.
What is Temperature Control Vaping?
TC is said to be a potential remedy for minimizing the mishaps associated with vapes as a way of creating surefire to reduce the resistive temperatures (temperature generated by resistors) ultimately reducing dry burns and horrible sensations felt by vapers.
How does a vape stay consistent?
By controlling the level of temperature that the coils will rise to, the device stays consistent from one puff to another, and even within the puff. In a typical wattage of an ordinary vape, the hits are inconsistent as the temperature of the coil varies depending on the hit prolongation.
Why do vape mods use wire?
Ideally, it involves the application of wire or coil in vape mods to control/restrict/limit power. It’s purposed to prevent dry or burnt hits that normally happen when a vaper prolongs the period of dragging vape juice from the mod. The technology assists in keeping the temperature static instead of letting it burn.
What is a vape atomizer?
A Beginner's Guide to Vaping with Temperature Control. A vape atomizer is a revolutionary device: after their invention, they didn’t only enhance how you consume nicotine but they have been subject to consistent improvement. Their constant innovations have kept vapes from becoming saturated entities, like their immediate rival, cigarettes.
What happens to resistance when vaping?
During vaping, resistance is converted to temperature and your pod mod, vape pen, or cig-a-like device adjusts the amount of power, monitors this temperature as you proceed to vape.
Why is it important to use authentic batteries for vaping?
The use of reliable and authentic batteries for vapes is highly recommended as it dictates the quality of TC achieved by the vape. That’s its main importance for including it in vaping accessories. In this article, the technology of temperature control in vaping, its significance, and what it is involved in, are discussed.
Why do vapers like smart technology?
Vapers, as well as smokers, are liking the invention of this smart technology as they can choose the appropriate temperatures they would love enjoying their stuff.
What is “temperature control” vaping?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C). The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature.
How to fix dryness in vape?
When vaping in TC, if you do notice any dryness when you’re low on juice, adjust the temperature down. If your mod has wattage control in TC, you can adjust that too. Higher is usually fine, but don’t go too low; as mentioned earlier, your mod should limit your wattage when the set temp is reached, but it won’t compensate when the wattage is set too low.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
How to install coils on a mod?
Install the coil as normal but take care to ensure it is screwed down tightly, as far as it can be. In the case of rebuildables, make sure the leads are trapped firmly. Then put the atomizer or tank on the mod, and again make sure that it’s tightened down as far as possible (but don’t go crazy with over-tightening). Check that the resistance is reading accurately and lock the resistance if applicable (typically by pressing the +/- buttons).
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
How does TC vaping work?
For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same.
How to vape in temperature control mode?
Most TC enables box mods have predefined profiles for Nickel (Ni), Titanium (Ti) and Stainless Steel (SS). Knowing the material your coil is built from will help you select the correct profile. Note that it is extremely important to use the appropriate setting for the best results.
What temperature should e-liquid be?
Some people like cooler vapor so they set the value to 300 - 350°F. Others like it a lot warmer so they go up to 500 - 530°F.
What is temperature control?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed. When the mod detects that the coil is close to reaching the set temperature it begins to act as a limiter and it gradually decreases the wattage. It’s the same as thermal throttling inside your laptop.
What do I need to start using Temp Control?
To experiment temperature control you need two things: a box mod that’s TC enabled and a coil made from Nickel, Titanium or Stainless Steel.
What material is used for vaping?
The most commonly used materials for vaping with temperature control are: Nickel, Titanium and Stainless Steel. Stainless Steel is considered to be the safest from this lineup and it’s also the only material that can be used in both Variable Wattage and Temperature Control modes.
Can you adjust wattage in TC mode?
Some mods also allow the adjustment of the wattage in TC mode. However there is a clear difference between variable wattage and temp control. Setting higher wattage will make the device reach a desired temperature faster, but it all depends on personal preference. There’s no right or wrong way of doing this and you will easily find a good value after some experimenting.
What is TC mode on a vape?
Basically, TC mode will allow you to vape safely on a given coil type, within boundaries, pre-programmed boundaries. The boundaries are set in degrees celsius or Fahrenheit. Vaping outside these bounds will be limited by power drops or cut outs and basically, you and your coil will be kept safe from dry hits and a world of pain.
What Does Temp Control Prevent?
Have you ever had a dry hit? Ever used an RDA (Rebuildable Dripping Atomizer) and had your vape suddenly taste really nasty due to your cotton drying out? Have you ever had your cotton dry out so much that it went up in flames?
How Does TC Benefit Flavour?
Have you ever found that you hit the sweet spot with your vape, where it just tastes and vapes way better? Some coils work better at a specific wattage and sometimes the juice just tastes that little bit better at a certain temperature, notice ably when the coil has been heated several times in a row.
What is Temp Control?
Temp control lets you adjust the temperature at which your juice is being vaped…a higher temp might bring out nuances of flavour you never thought possible with a particular juice. On the other end, a lower temp could stop you burning your juice and ruining the subtler notes in the flavour.
What does it mean when an atomizer is heated?
An atomizer that has been used on another temperature control device which has been heated up will mean you get the wrong base temperature for it on a new device and this can cause you lots of issues.
Why is temperature control important?
One of the most useful features of temperature control is that it allows for flavour adjustment, refinement and enrichment. Think of the way coffee smells when it’s being roasted and get the idea. Some flavours sing when they are warmed, some…like natural fruits, become sweet and even sickly.
Can you adjust juice wattage?
Sometimes juices just don’t taste right and adjusting the wattage up or down is not doing the job… but by tweaking the actual temperature you can get far better results.
What is intro vape forward classic?
Intro Vape Forward Classic is a great box mod, and it was released by Wismec. The screen of the device...
How to fill a cotton tank with e-liquid?
How to fill with e-liquid: (1) Hold the tank with one hand, lift and open the top cap. (2) Add e-liquid through the slot and pay attention not to drip it into the central airflow tube. (3) Close the cap carefully and firmly. Then let it stand for several minutes to getthe organic cotton completely saturated.
How to switch between TC-TI and TC-SS?
Press the Fire Key 3 times to enter menu setting interface; press the UP/DOWN Button to switch between “POWER”,”TC-TI”,”TC-Nl” and”TC-SS”.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Why is my smok vape not charging?
It could be that your firing pin has vape juice on it , or it might not be coming in contact with the charger.
How to turn off Smok?
After you’ve enjoyed a good vape session, turn off your SMOK device by accessing the menu system again. Scroll through your options until you reach the power option, which may read “Power On” or something similar. Using the main fire button, change this to read “Power Off.”
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Do you need to charge a vape battery?
The vape batteryneeds to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode.
What is TC on a vaporizer?
The Temperature Control (TC) feature of your vaporizer allows you to pre-set a value in Celsius / Fahrenheit that your coil temperature will not exceed. When the TC feature detects that the coil hits your pre-set (temperature) value, it acts as a limiter and will adjust, restrict, or cut-off the power to the coil until the temperature falls below ...
What does TC mean in vaping?
TC keeps your coil temperature at a fixed rate, no matter what your preferred vaping style is, whether it’s little inhales, big inhales, mouth to lung inhales, straight to the lung inhales or Olympic style chain vaping. The best analogy that I like to use is Temperature Control on your vaporizer (while vaping at a pre-set coil temperature, ...
Can you use Ni and Ti in a vape mod?
Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually. The second thing you need to do after attaching the tank to your vape mod is to “lock in ...
Can you use Ni coils in a vaporizer?
Nickel (Ni) and Titanium (Ti) coils are typically wrapped to very low resistances and should never be used in a vaporizer that doesn’t have a Temperature Control Vaping feature. Nickel (Ni) and Titanium (Ti) coils should never be dry fired for extended periods of time, although pulsing the coil intermittently in Temperature Control Mode can be done ...
