how to know which coil to build on vape

Before you begin making your coil, you need to determine the type of build that your device will support – not only the length of the coil, but also the thickness of the wire. The most common types of coils are Kanthal

, Nickel, Stainless Steel, Titanium, Nichrome, and Clapton. Most rebuildable atomizers are compatible with 3mm thick coils.

Full Answer

Which vape should I buy?

 · Macro vs. Micro Coils. Depending on the vape, coils vary in size. For coils under 2mm in diameter, we use the term micro. Anything larger than that would be a macro coil. Either way, understanding the terminology is a vital advantage. Single vs. Multiple. With certain vapes, installing more than one coil is possible. Check out the instructions that were included with yours.

What is the best coil for vaping?

 · Wattage = V²/R. Wattage is important because higher watts produce more heat and ultimately more vapor and flavour of your vape. The lower the resistance the higher your watts will be. With these formulas you can work out exactly what you will need for building your perfect coil to match your device's potential.

How to build your own vape coils?

 · Out of my experience, some of my DIY juice I like to vape at 30 W, where another is good at 70-80 W. Therefore, I build a coil for a mech mod, according to the wattage I think is suitable to the juice. However, if I can't build a coil, safe to be used on a mech, I just stick with my regulated mods.

How to know when to change vape coil?

 · Vape coil build #2 – Parallel Coil. This is one of my all time favourite vape coil builds…. A parallel vape coil is incredibly easy to build and yet delivers a noticeable difference in flavor and vapor production. This is due to the lower resistance verses a standard single coil with the same number of coil wraps.

Can you have more than one coil in a vape?

With certain vapes, installing more than one coil is possible. Check out the instructions that were included with yours. That way, if you need to build multiple, you'll know ahead of time.

Do thicker wires produce more desirable results?

Above all, wires are the most important part of this process. You'll be working with them throughout. In some instances, thicker wires produce more desirable results. However, on other occasions, the opposite will be true.

How are micro and macro coils created?

Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.

What is a parallel coil?

In essence, a parallel coil is made out of two or more wires wrapped next to each other. Resistance is divided by the number of wire strands, so make sure you are aware of your device’s limits when building parallel coils. For beginners, a dual parallel 26-gauge Kanthal coil would be a nice starting point.

How to save money on vaping?

One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...

What is a small metal rod?

Small metal rod: a small screwdriver, or coiling tool. Organic cotton: or whichever wicking material you prefer. Scissors: to trim your cotton. Other (optional) accessories: An ohm reader: used to be a thing, but a regulated mod gets the job done. A coil jig: it can make your life a little easier.

How to build your own coils?

How building your own coils will benefit you 1 Truly the only way to really get those big clouds 2 Better vapor production 3 Flavour rich 4 Cheaper than buying prebuilt coil heads 5 Fun building a custom coil 6 The Craft - really adjust your build to match your vaping style

Is it cheaper to build coils?

Building coils are cheap as it allows you to mainly use your own tools and household items such as nail clippers and plyers, but for people who would be interested in getting a kit look at something similar to the coil master kit.

Is RDA good for vaping?

When you are ready for a vaping experience that is more professional and a serious attack on your cigarette addiction, an RDA is a great and effective choice. Always treat your RDA, and any device with such powerful batteries, with extreme care.

What is Ohm's law?

Every vaper needs to know Ohm’s Law 1 Voltage (V) which can be defined as the difference in electrical potential, measured in volts. 2 Current (I) is the rate at which the electrons flow and in measured in amperes (amps). 3 Resistance ( R) can be defined as the degree to which a device opposes the passage of an electric current. Simply put, imagine people standing in line to go see a live performance of some kind, but instead of 4 ticket booths only 3 are open, the people will still get entrance but at a slower rate. The higher the resistance the slower the electric current will be.

Where is the coil located on a vape?

The coil is either situated at the top or the bottom of the atomiser. While variations in coil design may change the vapor and flavor output, vape coils essentially all work the same way.

How to make a Kanthal coil?

You’ll need the following tools: 1 A length of Kanthal vape coil wire 2 Atomiser of your choice 3 A regulated mod 4 A Coil Jig (alternatively a screwdriver or drill bit will work in a pinch) 5 Needle nose pliers 6 Wire cutters 7 Ohm’s reader (if you don’t have a mod that can detect resistances) 8 Small screwdriver (these are usually included as part of your atomiser kit)

Is NiChrome easy to build?

You do need to be aware that NiChrome is not quite as easy to build with as Kanthal. Primarily due to the fact it doesn’t hold its shape as efficiently.

What happens if the resistance is too low?

If the resistance is too low, you’re in danger of drawing more current than your battery is safely able to deliver. This could have disastrous effects; at worst you may vent the battery and it could catch fire or explode!

How to vape away?

Firstly, reassure the resistance of the coil and troubleshoot if required. Also, check that all connections and screws that you detached while building your coil are back where they’re supposed to be. Once all systems are good to go, it is time to reap your reward!

What is the difference between a micro coil and a macro coil?

The only difference between a macro and micro coil is the size of the inner diameter, that’s it!

What kind of wire is used for coils?

There are five common types of wire material that are used for coil building. Among these five, only stainless steel wire can be used for both wattage control vaping and temperature control mode vaping – a one of a kind feat.

What is stainless steel wire made of?

Stainless steel is made by combining chromium, nickel, and carbon. This alloy comes in different grades of purity, with varying percentages of the different metals. The most commonly used grade for stainless steel based vape wire is 316-grade SS, which is also used in the medical, pharmaceutical and food industries.

What is a Ni200 wire?

Nickel vape wires is made from pure nickel and is known as Ni200. This type of wire is famous for its use in temperature control mode vaping. However, there are some downsides to the use of nickel wire. Firstly, its more-than-desired softness makes it difficult for the coil to retain its shape.

Is titanium wire toxic?

Titanium. While using titanium wire for coil building, some safety concerns should be kept in mind. At high temperatures, the wire material can react with oxygen to yield titanium dioxide – a toxic substance not suitable for humans. It is also a flammable material and the flame is hard to extinguish.

Is titanium wire safe to use for coils?

While using titanium wire for coil building, some safety concerns should be kept in mind. At high temperatures, the wire material can react with oxygen to yield titanium dioxide – a toxic substance not suitable for humans. It is also a flammable material and the flame is hard to extinguish. Basically, titanium wires are linked with too many potential hazards, therefore it is best to avoid it until you’re more experienced with vaping. Plus, there are so many better alternate options!

What is coil in vape?

The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.

What are atomizer coils made of?

Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.

What is an atomizer head?

An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you. Phew. Ok let’s break atomizer heads down further. An atomizer head consists of three main parts:

How does an atomizer head work?

An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.

What happens when you press a button?

When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.

Who came up with the formula for measuring electrical resistance?

Back in the 1800’s a German physicist ‘Georg Simon Ohm’ published his works regarding the physics of electricity. After lots of sciency things, he came up with a formula to calculate the measurement of electrical resistance.

What is a vape coil?

Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...

Do sub ohm coils produce more vapour?

While preferred nicotine strength is often a personal choice, it’s important to remember that sub ohm coils will heat more e-liquid to produce more vapour. What this means is that you’ll also experience a greater nicotine hit.

What is rebuildable coil?

Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...

How to prime a new coil?

To prime a new coil; install it into the base of your tank, take your e-liquid bottle and drip a small amount of e-liquid onto the exposed cotton. Repeat this process around three times, then reassemble and fill your tank as normal.

What is mouth to lung vaping?

Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.

What are the ingredients in e-liquid?

The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.

What is the difference between VG and PG?

PG basically bonds flavouring and nicotine to the e-liquid , therefore the more PG usually translated to increased flavour. VG, on the other hand, relates to how much cloud is produced, with higher VG consistencies producing larger amounts of vapour.