6 Ways To Keep Your Coils From Burning.
- 1. Prime the Coil Before Use. Basic vaping rules like priming your coil can sometimes be overlooked or even forgotten. Unfortunately, failing to prime ...
- 2. Use a Lower Wattage Setting.
- 3. Keep Your Ejuice Level Topped Up.
- 4. Switch to Ejuice Containing Less VG.
- 5. Avoid Dark and Very Sweet EJuices.
Full Answer
What should I do if my vape coil keeps burning out?
If it doesn’t go away and you are using a variable wattage mod, try raising the power a bit for a couple of puffs—but make sure you don’t exceed the upper wattage limit of the coil, as this will most probably burn it. Refillable pod systems will usually arrive without e-liquid in the pod.
Why are vape coils made with cotton?
Most vape coils are made with cotton because it's perfect for soaking up e-juice and holds it really well while still allowing air to be drawn through. However, if you haven't vaped for a while or you're just switching to a new liquid or coil, the cotton can be extremely dry.
How long do vape coils last?
Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more. If you want your coils to last, try to avoid sweeter juices—especially the ones that come in high-VG ratios.
Why does my vape coil taste burnt?
In some cases, dry hits are caused by user error, but degraded vapour output and a burnt flavour can also be signs that your coil has naturally reached the end of its life. All coils have a limited lifespan, so you’ll need to replace them regularly to maintain an optimal vaping experience.
How do I stop my vape coil from burning?
0:001:18Stopping your vape coils burning in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipEventually there are some ways to avoid prematurely burning your atomizer. Head prime your coil.MoreEventually there are some ways to avoid prematurely burning your atomizer. Head prime your coil. This is the way to prepare the coil. And wick your material. And ensure it's saturated with the liquid.
Why do my coils keep burning out so quickly?
You're Not Priming New Coils When You Install Them Coil gunk is the most common reason why vape coils burn out, and that's a good thing because it's completely fixable through cleaning – there's no real damage to the coil.
How many puffs Should a coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
Why does my coil taste burnt after 2 days?
It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.
Hang On, How Do You Tell If Your Coil Is Burnt out?
If your coil is truly burnt out, you will know about it – the taste of Meche Brûlée is truly unmistakable!If your coil is only slightly burnt, you...
So How Can We Stop Our Coils from Burning out?
Well, from the above, it’s clear that the key thing we need to ensure is that there’s always juice in the wick when we vape.This means you shouldn’...
7 Ways to Stop Your Coil from Burning
If you don’t “prime” your coils before you start vaping, you can burn your coil before you’ve even gotten any use of out of it.When you first insta...
Saving Your Money and Your Tastebuds
Although it seems like a lot of things to keep track of, this is definitely an area where it’s worth going to some effort to protect your coils. Ev...
What are the components of e-liquid?
Two of the base components of e-liquid are Vegetable Glycerine (VG) and Propylene Glycol (PG). VG has a high viscosity, which makes it slower to saturate the coil. PG has a low viscosity, like water, so it saturates the coil quickly.
Can sweeteners shorten the life of a vape coil?
While added sweeteners can do wonders for replicating the flavour of our favourite fruits and baked goods, they do noticeably shorten the life of your coil, especially in larger quantities. As you vape, the sweetener in the e-liquid may leave residue on the coil.
Do coils last longer?
However, there are some ways to avoid dry hits for good and make your co ils last longer.
Does e-liquid have sweetener?
Many e-liquids even contain no sweetener to extend coil lifespan. The best way to find an e-liquid with low sweetener is to ask for advice at your local vape store, or online communities of vapers, who are always happy to help beginners.
Why do vape coils have cotton?
Most vape coils are made with cotton because it's perfect for soaking up e-juice and holds it really well while still allowing air to be drawn through. However, if you haven't vaped for a while or you're just switching to a new liquid or coil, the cotton can be extremely dry. By soaking the wick in e-juice before you start vaping, you'll eliminate any risk of that dreaded 'dry hit' This is as true for those using traditional cartomizers as it is for those with newer mods. The trick is let your e-juice sit in the tank for a good 5-10 minutes at least before you take your first hit.
How does high wattage vape work?
High wattages allow you to burn through e-juice at twice the speed. It may offer bigger and better clouds, but at the cost of longevity - your vape sessions won't last as long. Once the e-juice runs out the wick will dry and result in a dry hit. It may not be popular with the cloud chasers, but if you want a longer vape sesh and want to cut down the risk of burning your vape coil, turning down the wattage is the way to.
Why is it important to use high VG juice?
This is particularly important when using a high VG juice because it takes these longer to soak into your coil in between each drag.
Can you mix PG and VG in e-juice?
Typically, you'll see a mixture of PG and VG in any kind of e-juice. The higher the VG content, the thicker the liquid and the longer it takes to soak the coil between draws. That means that if you like vaping quickly you might burn out your coil quicker with a high VG liquid.
What is the worst thing about vaping?
A dry or “burnt” hit on your vaporizer is the worst. The raunchy flavours of singed cotton and sugar (if you’ve been vaping a sweet ejuice) do not combine well. Add the sensation of your throat and nose being raked over by dry, smoky claws, and you’ve got a pretty grim vaping experience.
Can you vape with a sub ohm tank?
Vaping with a sub-ohm tank can allow you to utilise much-higher wattage, but consistently using high wattage can shorten the life of your coil, not to mention the you have to top up your eliquid more frequently. This is especially true if you tend to “chain vape,” or take several drags right after one another with little time between.
Can dark juice build up in coil?
While opinions on this topic can vary quite a lot, the consensus is that dark juices do seem to cause premature build-up within a coil. One theory is the colourants added to the flavour oils may hasten the process of “gunky” accumulation within the coil.
Is a coil an expensive component?
While atomizer coils are not an expensive component, it’s always nice to get the most value for your dosh. If you are running through coils with annoying frequency, the chances are likely you’re falling prey to one of the habits mentioned above. The chances of having a bad or poorly made coil are rare if you’ve purchased ready-to-use products from a reputable shop. Honestly, the most common causes of short-lived coils are vaping at too high a wattage and using high VG ratio eliquids.
What is an atomiser coil?
An atomiser coil does a similar thing to a clearomizer which you may have found in a basic starter kit. Clearomizers are disposable tanks and vape coils all in one, so when you use a device with an atomiser coil you only replace the coil and not the tank every time it burns out. Much more cost-effective.
How do you stop your coil from burning out?
A burnt coil happens to us all at some point. Taking a puff on a coil that is burnt and desperately needs changing feels like you’ve swallowed a cheese grater and it tastes and smells pretty nasty too.
How do you prime your coil to help prevent it from burning?
Remove the old coil and replace with the new one. We suggest that you prime the atomiser coil while it is attached to the device or it can get pretty messy with juice leaking onto your hands.
What coils are there and which should I buy?
If you are just wanting to try vaping before you fully invest then you might look at getting a disposable atomiser. This is usually included in a very basic starter kit. The negative to this is in the name, it is disposable.
Can you clean your vape coils to make them last longer?
Yes, you certainly can! Coils aren’t expensive to replace, however, if you are away and in need of a coil ASAP, or if you are just trying to cut down on your spending then it might be a good idea to know how to clean your coils.
Why clean vape coils?
Cleaning your vape coils could well get an extra week or two out of them. A coil that is gunked up is going to reduce the flavour and vapour production, it can even make your vape taste burnt.
David Mason
I'm the founder of Vape and Juice and the face behind Vape and Juice TV on Youtube. When I'm not stealing Heisenberg from the warehouse, I give retail advice on Deathground's Retail Podcast and the Vape News related Cotton and Kanthal Show, on Spotify and Apple. I began vaping in 2009 and have been involved in the industry since 2013.
What if you have an e-cig with adjustable settings?
If you have an e-cig with adjustable settings (Such as the arc GTi or the the arc 5 ), make sure that they are set correctly for the resistance of the atomizer head installed.
Why is my atomizer not drawing enough e-liquid?
Drawing too hard, or not hard enough can cause an issue with atomizer heads. Too hard and your atomizer doesn’t have time to draw enough e-liquid into the wicking material, not hard enough and it won’t draw any in at all. The first mistake people usually make is attempting to vape like a smoker.
Why do you need to prim your atomizer head?
Often overlooked, priming your atomizer head is a way to prepare the coil and wicking material and ensure it is saturated with e-liquid before you vape. It is a simple process and can save you burning your coil and wick when you first install your new atomizer.
Can you vape like a smoker?
The first mistake people usually make is attempting to vape like a smoker. When you puff harder on a cigarette you get more smoke; this does not work when vaping. There is nothing already lit and burning, so your e-cig needs time to produce vapour. You have to vape like a vaper.
How to keep vape wick from drying up?
Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.
What to do if your coil is burnt?
Don’t be discouraged. Vaping is an enjoyable safer alternative to smoking. If your current coil tastes burnt, grab a new one and discard the bad one. Just don’t forget to prime it first!
How long does a coil last?
Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.
How to know when your coil is done?
Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.
How to start vaping on a pod?
When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.
How to prime a vape tank?
How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.
Why does my e-liquid burn?
Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.
