Use The Right Inhaling Technique. Long, slow draws help you to extract more of the vapor, but the length of the draw is different with each vaporizer. So, you should experiment with your vape to find the draw duration that works best for you. Most vaporizers work better if you ‘sip’ them instead of ‘rip’ them.
How to thicken vape juice?
This may be a bit of a challenge since most commercially sold vape juices are suspended in PG. Put it in a refrigerator. Placing your vape juice bottles in a refrigerator (especially during the summer) can significantly thicken them out. Thickening out vape juice is a pain (as you can see).
Can I control the thickness of my vape clouds?
Unfortunately, if your device is not powerful enough or adjustable, you will not be able to produce the thickest possible vape clouds. If you are using a basic e-cig or vape pen, you are unlikely to be able to control your clouds' thickness no matter how hard you try.
Do weed vapes produce thick vapor clouds?
I should tell you that you won’t be getting the same kind of huge, thick vapor clouds you see in vape mods or eCigs. Weed vapes produce dense, but not thick vapor that dissipates quickly. With herbal vaping, it’s more about the flavor and the aroma.
Should you add more VG to your vape juice?
Adding more pure VG into your vape juice will significantly improve the density and the size of your clouds. However, the downside to adding more VG is that it will dilute the flavor and possibly lower the nicotine level. In order to boost up the flavor of your juice look for flavorings that are suspended in VG.
How do you increase vape vapor?
Lean forward slightly and exhale again to get rid of excess air in your lungs. Without inhaling, blow the remaining air into your device so that you can see the vapor escape the air vents. This will increase the vapor production when you inhale through your device, giving you a kick-start on your cloud.
Why am I not getting big clouds from my vape?
Inhaling technique – when you're not sucking hard enough To get lots of vapour, you need enough airflow to cool the coil and help your cloud condense. Even when the airflow setting on your tank is at maximum, it's no good if you're not inhaling enough to make use of it.
How do I make my vape more milky?
Setting the airflow at a higher speed results in bigger clouds. With more air flux through the coil, the temperature of the coil stays lower as the airflow creates a cooling effect. Along with cooling, more airflow facilitates the condensation process of the vapor into a cloud.
Does more airflow mean bigger clouds?
Increasing airflow (to an extent) means more fresh air to cool vapor temperature; this not only gives you added cooling capacity making it more comfortable to inhale, but it also increases the size of your cloud.
Which is better, VG or pure vape?
High VG vape juices are better at producing thicker, better clouds. Pure VG is the best if you’re interested in cloud-chasing. However, if you take this route, you’re losing out on flavor. For better flavor, juices that are at least 50% PG tend to perform better.
Why is syrup thicker than water?
The higher the viscosity of an e-liquid, the worse the absorption properties get since it means that the liquid is too grimy to be absorbed the right way. Essentially, thicker juices can’t carry flavor properly. But, they produce more vapor.
What is the final ingredient in e-liquid?
Nicotine is the final and optional ingredient in an e-liquid. When you purchase a bottle of e-liquid, it is up to you to decide with how much (if any at all) nicotine will the liquid be diluted. Both naturally and synthetically produced types of nicotine are used.
What is aqueous glycerin?
Aqueous Glycerin (AG) This PG alternative is basically VG but diluted with 20% of distilled water. The benefit of adding AG to your liquid is that it will lower its viscosity to that of a 50/50 VG/PG liquid, which can definitely prolong your coil life and improve the smoothness of your vape.
What is VG in cooking?
Derived from vegetable oils, this natural chemical’s main role is to suspend other ingredients. VG is also called a base liquid (cause it’s usually one of two predominant ingredients, the other one being PG).
Is WFI a vape?
Water For Injection (WFI) Used frequently in medicine, WFI is sterilized and contains no additives. WFI can be found in local pharmacies, and there’s no danger in adding it to your vape juice (but keep it to a 4-6% mark).
Is vape juice full bodied?
But, a lot of times, it’s the feel of the vape juice that’s a bit… off. It doesn’t really fill up your lungs. It’s not full-bodied. Or it’s too full-bodied. All of this has to do with how thick – or thin – your vape juice is. This is called vape juice viscosity. And it can make or break your vaping experience.
The Grinder and the grind
A lot of new smokers and vapers underestimate the importance of getting the grind consistency just right. Perfectly ground herb can be vaporized to its maximum potential, amplifying the flavor, potency and amount of vapor with every pull or drag you take.
The Vaporizer
Similar to your herb grinder, you cannot afford to cut corners while selecting a vaporizer. But the fact that there are virtually thousands of brands and models vying for your attention doesn’t make shopping for these any easier.
Desktop Vaporizer
Are you a stay-at-home smoker? Then a desktop vaporizer might be more appropriate. These devices are bulky but pack in more options than what you’d ever need. You can select from a whip-styled vaporizer, which is one of the first models that used convection or hot air to vaporize the herb.
Portable Vaporizer
If you are looking for a portable device, then you literally have your hands full. There are Vaporizing pens as well as more advanced devices that can work with e-liquids, dry herbs and concentrates.
Cleaning the vaporizer
Vaporizer maintenance is another underrated aspect of getting the most out of your vapor. We have seen vaporizers so densely clogged with resin and debris that a mouse could get trapped in it.
Getting thick smoke from your Joint or Bong
Newer smokers often struggle to produce consistent vapor clouds while using handheld smoking apparatus, like a joint or a bong. But there’s a trick to everything.
Need Help Finding the Right Vaporizer to Produce Plumes of Vapor that will Make all of Your Friends Jealous?
Reach out to us today. Our site is jam-packed with the very best products hand-selected or designed by our team of veteran smokers that enjoy herb and concentrates as much as you do.
What happens when you set your temperature on a vaporizer?
But here’s the tricky part. For most vaporizers, the higher you set your temperature, the more your flavor will deteriorate , and the harsher the vapor is. So, experiment and find the sweet spot between flavor ...
Why do dry herb vapes work?
The reason is that dry herb vapes work best when the heated air can pass through the ground herb and heat it up evenly. In addition to getting better vapor, you will also get better flavor and potency because you will be extracting more of the active substances in the herb.
How often should I clean my vape?
You should empty the oven after every session and use a small brush to remove any used herb if needed. Once every 8-15 uses, take the vape apart and clean all residues and clogs.
What is dry herb vape?
It seems obvious, right? They are called dry herb vapes, after all, so the drier the herb, the better the vapor. You should always get the driest herbs you can from your dispensary, but if they’re not dry enough, then you can use a simple glass jar to get them even more dehydrated.
How long should I wait to inhale a vape?
Let Your Vape Sit For a While. Another good thing to do in conjunction with the above technique is to wait twenty or thirty seconds to start inhaling after the vape has reached the temperature you selected. Or, during a session, you can wait ten to thirty seconds between draws.
How to dry herbs?
To dry up your herbs- place it in a glass jar, place tissue paper on top of, and beneath, your herb and leave it overnight. If there is any moisture in the herb, it should get sucked into the tissue paper. You can also use moisture-absorbing bags that you can buy on Amazon to help with the process. 2.
How long should I draw a vape?
No matter which vape you use, it will take a few draws to get the hang of it. Generally, I recommend drawing for 6-10 seconds and taking a full, controlled inhale. You can adjust the speed and intensity to find the perfect draw. If drawing is hard, you may have overpacked the oven.
