How can I improve the flavour of my vape coils?
By increasing the surface area of the coil, devices like Geekvape’s Zeus Tank boost vapour production considerably, but in the process the flavour is also improved. In many ways, this option strikes the best balance between availability, simplicity and excellent flavour.
How do you know when to throw away a vape coil?
After a nasty burnt hit, your coil is probably ready to be binned. If you managed to catch it early, you can still give it a go and see if the burnt taste disappears after a couple of puffs. Unfortunately, chances are you’ve already burnt some of the cotton inside the coil, and it will need to be replaced.
Why does my vape taste burnt on a new coil?
Vaping on a brand new disposable coil without priming it first can mean your vape tastes of nothing, or even worse, give you a burnt taste or dry hit. This usually happens in tank systems that use replaceable cotton coils.
How do vape coils work and how do they work?
This cotton wrapping is the wick in your vape, and it works by drawing liquid near the heating element, which warms the juice and turns it into vapor. To prevent your coil from dry burning, which happens when there’s no liquid around for the coil to vaporize, it’s important to always keep your tank topped up and full.
How can I make my vape flavor taste again?
Vapers have noted that using mouthwash and a tongue scraper also help in being able to taste your e-juice better. Using mouthwash is one way to refresh your palate although there may be a temporary loss in taste.
Why does my coil have no flavor?
If you let the sticky residue build up, you're likely to notice a loss of e-juice flavour. This is because the accumulation can prevent the coils from reaching the proper temperature for heating the liquid, which may prevent the flavour from being released. To clear the residue, use warm water or isopropyl alcohol.
How do you bring a vape coil back to life?
Add lemon juice or vinegar to a bowl of hot water—making sure you keep track of any o-rings and other seals you remove in the process—to get rid of any built-up gunk. When you fire the vape back up, you may find that it's been brought back to life (as long as you properly primed your coil before doing so, that is).
Why is my vape tasteless?
If your vape gear works with pods or cartridges and you suddenly find there's no flavour from your vape, the e-juice might be running low or have run out. It's time to swap it out for a new pod or cartridge and see if you get your e-juice taste again.
Can't taste any vape flavors?
Another reason you can't taste e-liquid is that you might have developed flavour fatigue. This is where your sense of smell and your taste buds have been overworked from vaping too much. Simply take a break, ensure you are hydrated, and you will be back to normal in no time!
Can you save burnt coil?
Can you fix a burnt coil? Though burnt coils are best to be replaced as soon as possible, the good news is that you can get a little extra life from them whilst you wait for your new coils to arrive. First thing's first, remove your coils from your e-cig and let them soak in a bowl of hot water to loosen any residue.
Can I clean my coil if its burnt?
So, carefully remove the coil from the hot water and submerge it in the cold water. With this, any remaining debris will fall off, and your coil will be clean again. If you have done this and still experience the annoying burnt taste vape, then you can clean it using vinegar or lemon juice in hot water.
Why does my coil taste burnt after 2 days?
It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.
How long does a vape coil last?
How long a coil lasts will mostly depend on how much you’re vaping. Some people vape a lot and might have to change their coil after around a week, whereas more casual vapers might get as much as a month’s use out of a coil.
What happens when you fire a vape back up?
A little attention to your vape and a regular clean will save you lots of time and money, giving you uninterrupted vaping enjoyment.
How long does it take to get out of a vape?
It also depends on how a manufacturer makes its vapes and coils, including what materials it uses. Generally, if you’re a fairly regular vaper, you can assume you’ll get at least two weeks out of your coils—maybe even up to three weeks.
How to get rid of a burnt coil?
If you find yourself with a burnt coil, then one of the first things you can do before giving up and ordering a new one is simply to remove the element and put it in a small bowl of warm water. This will loosen up any e-juice that’s become stuck to it. After a few minutes, pour out the warm water and add cold water.
What is the cotton wick on a vape?
Usually, it’s not the metal coil that is causing the issue but the cotton material wrapped around it. This cotton wrapping is the wick in your vape, and it works by drawing liquid near the heating element, which warms the juice and turns it into vapor.
Choosing the Right Vape Device
Choosing a vape tank and coil that will boost flavour is one of the first fundamental steps. Sub-ohm tanks and coils are great for both vapour and flavour production.
Choosing the Right E-Cigarette Settings
Adjusting your vape settings is probably the easiest way to maximise flavour. The best way to do this is to start with a lower power setting and gradually increase this until you find the maximum flavour delivery. This is because the ideal wattage may vary between different e-liquids.
Choosing the Right E-Liquid
All e-liquids contain VG (vegetable glycerin) and PG (propylene glycol). You’ll find that different e-juices contain different ratios of these 2 ingredients which will cause the liquid to behave differently.
Other Tips for Maximising Flavour Production
In addition to the points above regarding your device and your e-liquids, there are some more general tips that you should consider when aiming to maximise flavour.
How to keep vape wick from drying up?
Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.
How to know when your coil is done?
Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.
How long does a coil last?
Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.
How to start vaping on a pod?
When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.
How to prime a vape tank?
How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.
Why does my e-liquid burn?
Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.
What to do if your coil is burnt?
Don’t be discouraged. Vaping is an enjoyable safer alternative to smoking. If your current coil tastes burnt, grab a new one and discard the bad one. Just don’t forget to prime it first!
What happens when you attach a new coil to a vape?
Normally, when you attach a new coil, the cotton inside it will draw up e-liquid from the tank after a while. But if you start vaping as soon as you’ve attached the new coil, liquid in your tank won’t have time to reach the heating element. And this gives you a flavourless – or weird-tasting vape as a result.
How to get better vape flavour?
Prime your vape coil properly for more flavour. Priming new disposable coils on first use will mean the wicking material will get a better chance to absorb more vape liquid flavour from your e liquid. Doing this will improve your vape flavour and make it taste stronger. Prime your new blank coil with four or five drops of vape liquid once you’ve ...
What causes a vape to taste dull?
Blockages inside your vape device can lead to weak and diminished flavours. Bits of tissue, dust, or congealed e-liquid can all block airflow going into and out of your device, and can make vapour taste dull.
Why can't I taste vape liquid?
If VG is above 50%, your vape liquid may be too thick to generate a strong flavour in your device. Try also tilting your vape liquid bottle, and see how quickly the liquid moves. If it it’s really sluggish, this could be why you can’t taste much of whatever flavours you’re vaping.
Why is my vape liquid so heavy?
You won’t get more than a smidgen of flavour from your vape liquid if it runs too slowly in your device. Some additives (sweeteners, flavourings, etc) can make e-liquids too heavy, but the main culprit is usually VG, or vegetable glycerine.
How to make vapes taste better?
Adjust vape airflow to improve flavour quality. Adjusting airflow inside your vape device will make flavours fresher and brighter. Tightening your airflow will usually produce vapour that tastes richer and stronger while opening it up will give you airier, softer and more diffuse flavours.
Why does my vape taste weak?
Getting weak or no flavour from your vape often happens because of incorrect device wattage or airflow settings. But using the wrong e liquids can also make your vape taste of nothing, as can forgetting to prime new vape coils, blockages, flooded wicks or the wrong mouthpiece.
Where are the airflow holes on a coil?
As well as the amount of airflow, the position of the airflow holes in the coils is also important. The airflow holes on most atomizers open up at the side of your coil, and although this can work well, there is a better layout.
What is the most widely used coil material?
Thankfully for flavour-chasing vapers, Kanthal is still the most widely-used coil material and it gives a clean, natural flavour from your juice. The biggest change in recent years is the introduction of temperature control. This has brought new coil types with it, notably nickel (Ni200), stainless steel and titanium.
How long should you leave atomizer heads?
Leaving your atomizer heads until the wicks are completely dry is important (24 hours is usually enough), so it’s a good idea to have another head to use while it’s drying. If you use rebuildable atomizers, you can change your wick easily, so doing it with every change of flavour is more feasible.
Why is it important to store e-liquid?
Correctly storing your e-liquid is important, because the flavourings can degrade with poor storage. Keep your juices away from heat and light, and minimise their exposure to open air to keep them in excellent condition.
Do ceramic wicks last longer?
Additionally, ceramic wicks are making a comeback. As well as being resistant to heat (so they tend to last longer), they also produce great flavour that some vapers swear by. Explore the options, but generally speaking, any high-quality cotton or a modern ceramic wick will give you superior flavour.
Can you close off the airflow on an atomizer head?
Closing off the airflow on an atomizer head with a wide bore (a large diameter) can make the resulting throat hit harsher, and the same is true for rebuildable atomizers with a large chamber. The best advice is to choose smaller bore coils and smaller chambers where possible to complement the restricted airflow.
What Is the New Coil Break-In Period?
As you’ve just learned, breaking in a new coil essentially means that you’re using your e-liquid to wash it. What you may not have ever stopped to think about, though, is the fact that you’re ridding your new coils of undesirable compounds by inhaling them.
Pre-Washing a New Vape Coil Takes Time: How to Do It Faster
If you’ve spent any time reading about how to clean vape coils, you’ve probably noticed that some people dismiss coil cleaning as taking too much time or not really being worth the effort. That’s because cleaning a vape coil is actually a fairly time-consuming task.
How to Pre-Wash a New Vape Coil
To maximize the result for the time spent, it’s a good idea to pre-wash several vape coils at once. That way, you won’t have to think about it again for a while. Get a heat-resistant bowl and place your coils in it. Meanwhile, heat some water in a saucepan or microwave until it begins to simmer.
How to Prep New Coils for Vaping
Okay, so I covered why you should do it, but now let’s jump to the practical part. Priming your coils isn’t an exact science but you can mess it up pretty fast if you are not careful.
How To Prepare MTL Vape Coils
Mouth-to-lung coils are specific because they have resistances higher than 1.0 ohms. They are very popular with former smokers since they mimic the process of smoking regular cigarettes. If you decided to start vaping not so long ago, and are currently transitioning from heavy smoking I highly suggest starting off with an MTL device.
Prime Your Coils & Vape Like a Boss
And there you have it — everything that you need to know about priming your coils… and then some.
Choosing The Right Vape Device
Choosing The Right E-Cigarette Settings
- Adjusting your vape settings is probably the easiest way to maximise flavour. The best way to do this is to start with a lower power setting and gradually increase this until you find the maximum flavour delivery. This is because the ideal wattage may vary between different e-liquids. With cloud-chasing, you will want to use a high wattage in order to create the biggest vape clouds. Ho…
Choosing The Right E-Liquid
- All e-liquids contain VG (vegetable glycerin) and PG (propylene glycol). You’ll find that different e-juices contain different ratios of these 2 ingredients which will cause the liquid to behave differently. Cloud-chasers tend to choose e-liquids with a higher VG - this causes the juice to be thicker, creating more vapour and thicker clouds. When it comes to flavour-chasing, it’s slightly …
Other Tips For Maximising Flavour Production
- In addition to the points above regarding your device and your e-liquids, there are some more general tips that you should consider when aiming to maximise flavour. First of all, you want to avoid ‘vaper’s tongue’! This is what happens when you vape the same flavour too much and begin to become ‘immune’ to it. You should try using different flavours every couple of days in order to …