For anyone new to vaping they should use a juice with a blend of both propylene glycol (PG) and vegetable glycerin (VG). This combination helps combat that harsh throat feeling and make your hits much smoother. However a cloud chaser needs a VG heavy E-juice because it creates thicker, and denser vape clouds.
How to make your vape cloud bigger?
Tips for Bigger Vape Clouds #1: Increase vapor production. Increasing your vapor production will result in bigger vape clouds. Here are several ways in which you can pump up the creation of your vapor. Increasing the power of your device will allow you to vaporize e-liquid at a much quicker pace.
Why do vape tanks get dense clouds?
This is because unscrupulous persons may sell rewraps as the real deal. The reason why RDA, RTA, and sub-0hm vaping tanks can produce dense clouds is because of the amount of current that passes through the coils. This is the principle behind adjusting the power settings of your device for maximum clouds.
What is the best vape juice to make the biggest clouds?
Use max VG vape juice: While PG and VG both make vapor, the higher the content of VG in your juice will allow for the biggest clouds. Consider it high-octane fuel for your tank!
Is cloud chasing vaping fun?
Cloud chasing can be fun and enjoyable if done properly and respectfully. The easiest and safest way to start vaping and cloud chasing is to get a sub ohm vape pen. It comes with a tank and powerful battery all in one and is very easy to use, even for beginners.
How do I make my vape have less clouds?
The longer you draw on the device, the larger the cloud will be. Although small devices don't put out a lot of vapor, a long puff will put out more than a short one. When you go to exhale the vapor, it's best to purse your lips and blow a tight stream of vapor downward and away from any onlookers.
Does less airflow make bigger clouds?
Here's how you can get it right. Increasing airflow (to an extent) means more fresh air to cool vapor temperature; this not only gives you added cooling capacity making it more comfortable to inhale, but it also increases the size of your cloud.
How do I make my vape clouds better?
If you're interested in vaping bigger clouds, there are a couple of things you can try. The easiest way is to try vaping with High Vegetable Glycerol (HVG) e-liquids, however vape mods and even changing how you inhale and exhale can have an effect on the size of your vape clouds!
How do I make my vape clouds dense?
Airflow. When chasing larger vape clouds, you want to maximise the airflow to your device. This increases the amount of air that gets to the coil - a fresh flow of air will encourage the vapour to condense into thicker clouds.
What makes big clouds vape?
For big clouds, choose an e-liquid with a 50/50 PG/VG ratio, or higher VG. High PG e-liquids are not good for producing lots of vapour and can be quite harsh on your throat. E-liquid strength is also important when using lower resistances.
Is more airflow better for vaping?
With an increased airflow, you will experience less flavor, less of a harsh throat hit and more vapor (with a cooler and looser draw). With a decreased airflow, you will experience more flavor, more of a harsh throat hit, and less vapor (with a hotter and tighter draw).
Is VG or PG better for clouds?
Cloud production- For cloud chasers who exhale big and thick clouds of vapour, a high VG juice is the way to go. A VG: PG ratio of about 80:20 or 70:30 will get you humongous amounts of dense clouds.
How do I make my vape ring thicker?
Think of your tongue like a conveyor belt.At the same time, bring the lower jaw slightly but rapidly upward. Tuck your lips inward slightly, but rapidly.This will put a "back-spin" on the smoke, helping the ring stay tight. This should create a very beautiful, thick ring of smoke.
What vape blows the biggest clouds?
Sub ohm vaping, also known as sub ohming, is a style of vaping that produces large clouds of vapor. Sub ohm devices utilize low resistance coils that are less than one ohm, hence the name sub ohm. They also provide enough airflow suitable for direct lung inhalation.
How do you make your vape Milky?
1. Look at Your Device's Power. In short, the higher the voltage of your device's battery, the more intense your vaping experience will be, and the bigger your vape clouds will be, too. If you have a device with a low voltage (e.g. traditional e-cigs and basic vape pens) then you may struggle to get thick clouds.
What's the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What vape juice is best for clouds?
5 of the best e-liquids for cloudsTropika | Twelve Monkeys Classic 50ml. VG:PG 90:10. ... Boulevard Shattered I Wick Liquor 50ml. VG:PG 80:20. ... Double Drip Coil Sauce. VG:PG 70:30/80:20. ... Element Shortfills. VG:PG 80:20. ... Koi Shortfills. VG:PG 80:20. ... VG:PG ratio. ... Devices, coils & vaping style. ... A smoother vape.More items...
Which is better, VG or pure vape?
High VG vape juices are better at producing thicker, better clouds. Pure VG is the best if you’re interested in cloud-chasing. However, if you take this route, you’re losing out on flavor. For better flavor, juices that are at least 50% PG tend to perform better.
Why is syrup thicker than water?
The higher the viscosity of an e-liquid, the worse the absorption properties get since it means that the liquid is too grimy to be absorbed the right way. Essentially, thicker juices can’t carry flavor properly. But, they produce more vapor.
What is the final ingredient in e-liquid?
Nicotine is the final and optional ingredient in an e-liquid. When you purchase a bottle of e-liquid, it is up to you to decide with how much (if any at all) nicotine will the liquid be diluted. Both naturally and synthetically produced types of nicotine are used.
What is VG in cooking?
Derived from vegetable oils, this natural chemical’s main role is to suspend other ingredients. VG is also called a base liquid (cause it’s usually one of two predominant ingredients, the other one being PG).
Is WFI a vape?
Water For Injection (WFI) Used frequently in medicine, WFI is sterilized and contains no additives. WFI can be found in local pharmacies, and there’s no danger in adding it to your vape juice (but keep it to a 4-6% mark).
Is vape juice full bodied?
But, a lot of times, it’s the feel of the vape juice that’s a bit… off. It doesn’t really fill up your lungs. It’s not full-bodied. Or it’s too full-bodied. All of this has to do with how thick – or thin – your vape juice is. This is called vape juice viscosity. And it can make or break your vaping experience.
Can you use vodka to clean coil heads?
Well, you can. Adding about 5-7% of vodka to your e-liquid will thin it out nicely. This is why many vapers suggest using vodka to clean coil heads. But don’t go overboard. Usually, 5 to 7% of alcohol will thin out your vape juice nicely. Any more than that will burn your throat right off.
How to get clouds?
Let me take you through a basic 6 step guide on a technique that should help you produce bigger clouds. Exhale and empty your lungs completely. Lean forward slightly and exhale again to get rid of excess air in your lungs.
How to get more vapor in your lungs?
Now inhale for as long and as hard as you can. As you inhale straighten your back upwards to open upon your lungs and allow more vapor to enter.
What happens when air goes over coil?
When the air going over your coil increases, your device is able to produce vapor at a quicker pace. When the vapor production increases, the vapor is pushed out of the device quicker and therefore increases the rate at which the "old" vapor can be replaced with "new vapor". Voila!
Why is it so hot to vape?
Firstly, if you increase the power of your vape through higher wattages or lower resistance coils, the vapor's temperature increases and may become too hot to vape comfortably. Increasing the airflow allows for more fresh air to come in and cools the temperature of the vapor, making it more comfortable to inhale.
What is a low resistance coil?
People have discovered that vaping with a powerful battery, and a low resistance coil is an effective way to increase vapor production. This brings us popular trend of sub-ohm vaping. In short, it involves vaping with a coil that has a resistance lower than one ohm.
Does a higher power make more vapor?
It is important to note that the increase in power doesn't create more vapor, instead it allows you to receive that vapor quicker than if you were to vaporize the e-liquid with less power. This in turn vaporizes the e-liquid quicker which results in more vapor drawn in from a single inhale.
Can you have the same mod as a cloud chaser?
Bigger cloud production certainly isn't all about the device. You can have exactly the same mod as any pro cloud chaser, but this doesn't mean your clouds will be just as great. Technique has a lot to do with it to. The right technique involves the perfect combination of inhaling, exhaling and body posture.
Get a Big Vape Cloud: Setting Airflow for Maximum Clouds
Once you’ve been vaping long enough, you’ll probably start to get curious about making a big vape cloud. But before you start cloud chasing just yet, it’s important to do some research first. This post is on getting a bigger cloud by maximizing your airflow settings.
How to Get a Big Vape Cloud
If you’re trying to boost a big vape cloud, you need to increase airflow, but getting the settings right without overheating the mod can get tricky. Not enough airflow can lead to overheating and too much will keep coils cool, but decrease the size of your cloud. Here’s how you can get it right.
How to modify your own set up to get the best Vapor Production
First you are going to want to check out your tank or Rebuildable Dripping Atomizer to see how much air-flow you have at your disposal. Make sure the air-flow is completely open or most of the way open.
How to make clouds with low resistance coils?
There are a number of different ways to wick your low resistance coils including tucking the wick underneath the coil, tucking it behind the coil or clipping it without tucking. Getting your wicking right will give you the most use out of your e-liquid. A good technique is to cut both ends of a wick to create ‘tails’. Fluff these tails up a bit and tuck both of them under the coil. Make sure to clear a little airway though beneath the wick and push slightly to one side.
What is the best liquid for cloud chasing?
This is so you don’t get a harsh throat and so the experience is lighter. However for cloud chasing, it is best to have a VG heavy e-liquid because it is a thicker liquid which will result in denser ...
What is an RDA in cloud chasers?
Atomizer. For those cloud chasers who are competitive, having a rebuildable drip atomizer (RDA) is an absolute must. RDA’s require cloud chasers to build their own coils which they can attach to the tank using a screwdriver or other similar tool.
What are the two types of mods in Cloud Chaser?
There are two types of mods; regulated mods and mechanical mods. Cloud chasers most commonly choose to go for mechanical mods as they have excellent air holes and connectivity.
Why do cloud chasers use dual coils?
There is a choice between a single coil and dual coil however most cloud chasers choose to go for dual coils because it produces more vapor.
When cloud chasing, what are you pushing the batteries to?
When cloud chasing, you are literally pushing batteries to their limit.
Can you overcharge a mod?
But keep this in mind, misuse of batteries can potentially cause it to explode or catch fire. In short, make sure to never leave your mod charging unattended, never overcharge your mod and never use a charger that isn’t branded or that came with your mod.
What is cloud chase vape?
What is vape cloud chasing? Cloud chasing is the act of blowing huge clouds with a vape. Cloud chasers are constantly trying to invent new ways to produce the biggest clouds of vapor. That means lower ohm coils, higher wattages and tons of airflow.
What coils do you use for cloud chasing?
Originally, cloud chasing was done almost exclusively with low-ohm coils on a mech mod. Eventually builders realized they could use two strands of wire to create an ultra-low resistance coil, with tons of surface area, which eventually gave way to twisted and parallel dual coil builds.
What is sub ohm vaping?
Sub ohm vaping, also known as sub ohming, is a style of vaping that produces large clouds of vapor. Sub ohm devices utilize low resistance coils that are less than one ohm, hence the name sub ohm. They also provide enough airflow suitable for direct lung inhalation. Sub ohming typically requires vape mods capable of putting out a minimum ...
Is vaping a good alternative to smoking?
However, in their prime, cloud competitions turned a lot of heads, and made people aware of vaping as an alternative to smoking. Whether you’re in it for the big clouds, flavor or just the nicotine, we’re all about the vape. Born in Brooklyn, New York, Dave has always had a passion for helping people quit smoking.
Can you blow clouds in public?
Public spaces are not meant for cloud blowing unless there’s reason to believe it won’t cause a problem. For example, at an outdoor concert with a tolerant audience. In general, most non-vapers don’t understand what the vapor is or isn’t, so it’s advisable to not literally put it in their faces.
Is a sub ohm vape a cloud chaser?
But not all sub ohm vapers are necessarily cloud chasers. A sub ohm vape is the only way to achieve such voluminous cloud production. Cloud chasing has become more accessible today with the popularity of sub ohm vape tanks because it doesn’t require as much knowledge as before. Still, safety is extremely important!
Why is it better to use a large vape tank?
Indeed, it is the larger, the better since producing dense clouds consumes more e-juice. And so to avoid constant refilling or the embarrassment of having your device run out of e-juice while you are vaping, it is best to opt for large capacity tanks. This is because they are the best vape tanks for getting maximum clouds.
Why do RDA tanks have dense clouds?
The reason why RDA, RTA, and sub-0hm vaping tanks can produce dense clouds is because of the amount of current that passes through the coils. This is the principle behind adjusting the power settings of your device for maximum clouds. Increasing the power of your device enhances its capacity to vaporize e-liquids.
What is the beauty of vaping?
The ‘beauty’ of vaping for most vapers lies in the thick, aromatic clouds of vapor that are created. It most cases, only specialized vape devices (sub-ohm) produce such clouds, hence the shift towards such devices. There are other ways around producing such clouds especially if you do not want those specialized devices.
What is the best coil system for e juice?
However, the best part is the QF coil system that provides excellent flow for e-juices with high VG content and thick, rich clouds. With this type of tank, dense clouds are not the only thing you blow; the mesh coils also allow you to blow soft, aromatic clouds too.
How many airflow slots does a Vaporesso Skrr tank have?
Vaporesso Skrr Tank: This sub-ohm tank sports great features; an 8ml e juice capacity and four airflow slots at the bottom.
How long should I wait to inhale a vape?
Let Your Vape Sit For a While. Another good thing to do in conjunction with the above technique is to wait twenty or thirty seconds to start inhaling after the vape has reached the temperature you selected. Or, during a session, you can wait ten to thirty seconds between draws.
Why do dry herb vapes work?
The reason is that dry herb vapes work best when the heated air can pass through the ground herb and heat it up evenly. In addition to getting better vapor, you will also get better flavor and potency because you will be extracting more of the active substances in the herb.
How often should I clean my vape?
You should empty the oven after every session and use a small brush to remove any used herb if needed. Once every 8-15 uses, take the vape apart and clean all residues and clogs.
What is dry herb vape?
It seems obvious, right? They are called dry herb vapes, after all, so the drier the herb, the better the vapor. You should always get the driest herbs you can from your dispensary, but if they’re not dry enough, then you can use a simple glass jar to get them even more dehydrated.
How to dry herbs?
To dry up your herbs- place it in a glass jar, place tissue paper on top of, and beneath, your herb and leave it overnight. If there is any moisture in the herb, it should get sucked into the tissue paper. You can also use moisture-absorbing bags that you can buy on Amazon to help with the process. 2.
How long should I draw a vape?
No matter which vape you use, it will take a few draws to get the hang of it. Generally, I recommend drawing for 6-10 seconds and taking a full, controlled inhale. You can adjust the speed and intensity to find the perfect draw. If drawing is hard, you may have overpacked the oven.
What happens when you set your temperature on a vaporizer?
But here’s the tricky part. For most vaporizers, the higher you set your temperature, the more your flavor will deteriorate , and the harsher the vapor is. So, experiment and find the sweet spot between flavor ...
How to use a stealth vape pen?
This is one of the most frequent and most effective stealth vaping technique. Using your small stealth vape pen with high content PG juice, place your mouth onto the end of the vape pen and press the fire button. Inhale the vapor and keep it in your lungs for a couple of seconds before exhaling it out.
What vape flavors are good for stealth?
The vape flavors that tend to blow your cover when trying not to get caught stealth vaping are tobacco, cakes, pastries, and strawberries.
What is cloud chasing?
Cloud chasing is for the people who want to blow the biggest vaping clouds; this somewhat draws attention if you are doing this in public. However, stealth vaping is the opposite; you want to blow smaller clouds while still getting the nicotine fix at the same time. Many people consider stealth is vaping to vape discreetly without drawing unwanted ...
Why use stealth vapor?
Stealth vapors tend to go for a higher nico tine content, to make up for the lack of throat hit produced by a weaker vapor. Using higher nicotine e-liquid will mean that you will require fewer hits. Less hit means fewer chances of drawing attention in public or at work. Some aromas are there, that are more obvious in e-liquid that others, ...
How long does it take for a cigarette to blow out?
If you take a deeper inhale for 5 seconds or more and then exhale back out of your nose, there will be almost little to none vapor coming out.
Is it cheaper to vape in the cloud?
Stealth vaping is usually cheaper than getting into cloud chasing because you spend less money on e-liquid and higher wattage mods. If you’re that sort of person that wants to vape in the corner of the street and be in your own world, stealth vaping is for you and you will get benefit from this vaping guide a lot.
Is it safe to vape in public?
Vaping has been banned in places such as shops, bars and other general areas in public, even though there is medical evidence stating that vaping is safer than smoking regular cigarettes. To put it into simple terms for you, stealth vaping is a way to diminish the indication of vaping, simply to evade disturbance or awkwardness.
