how to get my vape to stop spitting juice

^{How Do I Stop My Vape From Spitting/crackling?}

1. Prime your vape coils For one thing; prime patiently! The right way to prime is to simply ‘paint’ the exposed cotton with a miniscule touch of vape juice, and ...
2. Flick your vape downwards onto paper towel If you’re currently experiencing a spitback/crackling vape issue and you don’t want to throw your current coil away there are a couple ...
3. Clean your tank with cotton buds

Full Answer

How do I Stop my vape from spitting up?

If you’re having spitback issues, changing to a high-VG e-juice can solve the problem by slowing down your wicking. Pulse the fire button – If you’ve primed or dripped too much—just pulse the fire button a couple of times before you start to inhale. The popping sounds should fade, leaving the ordinary, white noise-like hum of vaporization.

How to avoid spitting out your e-juice?

If you are finding that you have a lot of spitback issues, it is better to go for the higher VG juices. It will help reduce the spitting problem. Thick VG e-juices often slow down the wicking process, thus the chance of flooding the atomizer reduces. Once it reduces the flooding, the spitback also gets reduced.

What causes vape juice to spit back?

Another common cause of spitback is using the incorrect vape juice that is not designed for a particular vape device. For example, a PG e-liquid will be too think for a sub ohm vape.

Can I Stop my atomizer from spitting out the liquid?

If your vaping setup doesn’t allow you to prevent spitting, you can at least keep the e-liquid out of your mouth. If your atomizer is spitting a pipe screen can prevent the e-liquid from reaching your mouth. As you may have noticed, more and more pre-built atomizer heads are coming with screens over the coils.

How to keep vapes from leaking?

Try to keep your vape positioned vertically if you’re not using it for extended periods of time. Don’t get into the habit of laying your device down all the time, or you will have to deal with inevitable leakage.

Why does my e-liquid spit?

Spitback has a simple cause: e-liquid gets pooled up on the coil itself and gets “cooked” instead of being vaporized. It spits similar to the way boiling water does, and with you inhaling from the tip, you can easily catch a droplet or two. The problem is closely linked to flooded coils, but, in some cases, it can happen even without flooding. Here are some ways to prevent spitting and popping from occurring.

How to stop vaping from flooding?

Reduce your airflow – Inhaling too forcefully when you vape encourages flooding by literally pulling more e-juice into the chamber. This is easy to solve: inhale more softly, letting the coil and wicking do the work for you. If you’re still having issues, try reducing your airflow setting. However, if you reduce the airflow, be careful not to inhale too strongly to compensate—this could just make the issue worse.

Why do multistrand coils pop?

Avoid exotic coils – This applies mainly to rebuildables. Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types. The easiest advice if you absolutely want to avoid spitback is using simple round wire instead.

What happens if you inhale too much liquid?

If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

What does it mean when a juice tank is not airtight?

Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.

How Do I Stop My Vape From Spitting/crackling?

For one thing; prime patiently! The right way to prime is to simply ‘paint’ the exposed cotton with a miniscule touch of vape juice, and then be sure to still wait 5 minutes or so before first firing up your unit.

How to flick a vape?

One common method is to take a firm grip of your unit and ‘flick’ it downwards, so that the mouthpiece swings down in a wide, fast arc . The inertia of your flick is likely to dislodge and eject substantial pools of vape juice; try it over a paper towel, you’ll be surprised how much emerges from your drip tip!

What is a spit guard?

There are several drip tips and mouthpieces available that come fitted with a spit guard, effectively a honeycomb or mesh design with holes that are smaller than the agitated vape juice droplets, ensuring the mouthpiece will always be able to catch them before they reach your lips.

Why is my vape coil flooding?

There are several reasons your coil is flooding, most commonly it’s because your coil is simply on it’s way out; the cottons inside – having been atomising sugary vape juice for weeks – have effectively caramelised, the material now sodden with vape fluid and incapable of effectively soaking up new juice.

Why does my vape keep crackling?

About 90% of the time the reason your vape is spitting or crackling is because the interior of the coil has become flooded with vape juice. Take a moment to imagine what happens if you sprinkle a few drops of water onto a hot pan; the liquid bubbles about, unable to withstand the agitation of direct heat and flies off in any direction to get away.

Where does vape juice come into contact with the heating element?

Unfortunately, many prime their coils a little too intensely, dropping large quantities of vape juice into the centre of the coil, where it comes into direct contact with the heating element and behaves the way most liquids do when sudden, direct heat is applied to them.

What happens if you sprinkle water on a hot pan?

Take a moment to imagine what happens if you sprinkle a few drops of water onto a hot pan; the liquid bubbles about, unable to withstand the agitation of direct heat and flies off in any direction to get away. In the case of a vape tank, one of those directions just happens to be towards your mouth.

Why do vapers take so long?

This is commonly due to the way in which the individual user to take drags from a cigarette, which tends to be rather vigorous.

How does a vacuum tank work?

In order for the vacuum effect to function appropriately, the tank needs to be well-sealed and air-tight. Check the assembly of the tank’s various components to ensure that everything is connected properly and securely. In addition, inspect the various parts for cracks or gaps that could potentially allow excess air to enter the tank. This can also contribute to flooding and gurgling.

Can you overfill a juice tank?

Some tanks are larger and can, therefore, hold a greater volume of juice, while others are smaller and can hold less. Regardless of the tank size, overfilling it can result in flooding, gurgling, and spit-back. As a general rule of thumb, you want to fill your tank to a level slightly below the air hole or chimney.

How to get vape juice to stop popping?

Another great tip is push the button and fire up your battery for a few short bursts before you start to vape. This will help the the excess liquid evaporate before you begin your vape session. If there's excess liquid in there, you'll hear a popping when you fire up the battery. Simply give this a few short bursts until the popping dies down or subsides altogether. It's a good idea to do this alongside the flicking strategy mentioned earlier.

Why does my vape tank spit back?

It isn't pleasant and it can happen often, particularly if you're a keen modder trying out different components to get the right 'balance' and find the perfect vaping experience. It happens when there's simply too much e-juice in the centre of your coil which can't be properly vaporised. Veterans know how to avoid this, but for those of you just starting out or looking for ways to curb sptitback, here are some things to bear in mind.

What does a downward flick do to a vape?

A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience. This is particularly good advice if you've just filled the tank - just be warned that it could get messy so be sure to do it over a sink or some tissue!

Where does vapor go when you vape?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale.

What does it mean to prime a vape coil?

Priming the coil means dropping some e-liquid directly onto it to saturate the wick and get the biggest bang for your buck in terms of flavour. Fans of big, flavoursome clouds will often prime their coils to get the best experience possible, but there is a risk of putting too much liquid in at once. Everyone that's primed a coil has had this experience and learned from it - don't be afraid to experiment and find the sweet spot for your vape kit!

How to fix vape spitting?

This excess liquid stores in the tank’s center post or in the mouthpiece. It runs down to the center of the coil and causes spitback. To fix vape spitting, take small cotton and roll it up.

How to stop vape from spitting or popping?

By now, the reasons behind the vape leaking are clear. In earlier points, we have discussed spitting and vape crackling. So, it is time to find out the ways to fix vape from spitting.

What is vape leaking?

Leaking is simple, whenever the liquid comes out of the tank through the airflow system, it causes leakage. There can be leakage of a few drops or it can lead to emptying the whole tank.

How to make a vape pop without inhaling?

After filling the tank with e-juice and completing the coil setup, press the fire button a few times without inhaling. It will vaporize that excess liquid from the atomizer. The vape popping and spitting sound will slowly fade and leave the device in a normal state. Thus, it will reduce the risk of spiting.

Why does my vape tank leak?

One of the common reasons for the leakage is overfilling. New vapers often overfill the tank for a longer vaping session but it can backfire and cause leakage. Therefore, it is better to leave a small unfilled area. This small air pocket will prevent any kind of leakage.

What is it called when you vape a lot of liquid?

Excess e-liquid coming out through the mouthpiece and into the vapers’ mouth is known as vape spitting. Spitback is recognizable as the liquid directly coming to the mouth. Both the nicotine and the artificial flavors leave a strong sensation on the mouth. With vaping at high wattage, the warm liquid may make you feel uncomfortable.

Why do vapers forget to tighten the screw?

However, often because of a hurry, vapers forget to tighten the screw. Cross-threading the top cap or forgetting to screw it together tightly enough can cause leakage. One must ensure the threads get synchronized in a way but not too tightly. Thus, the vaper must find the right spot.

Why does my vape leak?

Cracks in the glassware are usually one of the most obvious causes of leakage from your vape. Occasionally though, very small hairline cracks can develop over time that can escape detection. Be sure to inspect your vape thoroughly now and then to check for any signs of damage.

What does leaking mean in vaping?

Leaking, as the name implies, is a broad term that, when used in the context of vaping, describes any situation where the e-liquid (“juice”) escapes from somewhere it is meant to be and ends up somewhere it isn’t, such as the airflow system, the inside of your coat or all over the work notes that were in your bag…

What is a drip tip?

The drip tip, also known as the mouthpiece, provides a buffer between your breathing parts and any rogue drops of super-hot e-liquid that try and escape. If you use a drip tip and still encounter spitback, you could try using a drip tip that is specifically designed to counteract spitback.

What happens if your coil doesn't get hot?

If your coil doesn’t get sufficiently hot to rapidly transform the e-juice into an aerosol, spitbacks and popping can quickly follow. Fortunately, the kinds of vaping devices that are most likely to experience these phenomena also usually come equipped with variable power. Simply crank up the power by a few watts at a time and see if this resolves your issue.

Can you fill a e-juice tank all the way to the top?

Do not fill your tank all the way to the top. Leaving a small gap for air at the top can help prevent e-juice from escaping from the seals, mouthpiece, or air holes. If you experience leakage while filling up your tank, slowing down can help alleviate that.

How to stop vaping from spitting?

Press the fire button a few times before you start to inhale. Wait for the popping sounds to fade as your vaping device stops spitting. It won’t stop it spitting, but it’ll stop you getting in the line of fire and getting that spitback in your mouth.

How to keep vape juice from leaking?

When you lay your device down on its side, the vape juice seeps through the airflow holes and causes leakage. If you’re at home or in an office, or even in your car, put your e-cigarette down with the tank upright. If you carry it in your pocket, keep it the right way up. The worst culprit for causing the e-liquid to seep out is putting your device down at night – make sure you don’t lay it on its side as it’s going to be there for a long time.

How to reduce spitback and popping?

If you don’t want to increase the wattage on your vaping device because you prefer a cooler vapour, then you can reduce spitback and popping by reducing your tank’s airflow. By reducing the airflow to the coil, you limit the amount of e-liquid that is drawn up with your inhale. For this to work properly, make sure you don’t inhale harder to compensate.

How to make a coil vapor faster?

By increasing the power, you’ll make your coil vaporise the e-juice faster. It could be that your wattage is currently too low and so your wick is supplying e-liquid faster than the coil can burn it, which causes flooding. Increase the wattage, but do it gradually so you can monitor the effect as you don’t want to turn the power up too quickly and then burn the wick. This is particularly common with sub-ohm vaping as the wattage doesn’t need to be very high in sub-ohm coils for them to work.

Why do RBAs spit?

Twisted coils are particularly well-known for this as they have a lot of nooks and crannies which catch e-liquid, making it pool. Pooling e-liquid pops and spits when it’s heated because it cannot all be vaporised at once.

What are the O rings on a vape?

O-rings are the little rubber rings that stop your vape juice from leaking out of your tanks. It stands to reason, then, that if they’re worn or damaged, they won’t work properly and your e-juice will leak. Take your tank apart to check your O-rings. If they’re damaged, replace them. They’re not expensive and they’re easily available.

Why do drip tips work?

Some drip tips have been especially designed to minimise spitting by angling the tip more. It makes it harder for the spitting e-liquid to get out of the atomiser and hit your mouth as they hit the bend in the drip tip instead. Also, curved drip tips work in the same way. It doesn’t stop your atomiser from spitting but it does mean that you don’t get the spitback in your mouth.

How to prevent e-cigarette from spitting?

In this case, you can prevent the atomizer from spitting by increasing your e-cigarette’s wattage so it vaporizes the e-liquid more efficiently.

How to stop e-liquid from popping?

You can often prevent an atomizer that’s popping and spitting by simply using a wide bore drip tip. Since e-liquid can’t condense and form droplets inside the bore of the drip tip, it falls back to the coil.

Why is my atomizer dripping so much?

Are you using too much e-liquid when dripping because you’re constantly getting dry hits? If so, remove the atomizer enclosure and look inside your RBA when you get a dry hit. Look at the wicks. Are the ends of the wicks still wet, even though the middles are dry? Trim off the wet portions, allowing the ends of the remaining wicks to just touch the atomizer’s drip well and act as tiny mops. You’ll experience less dry hits, and you’l stop flooding your atomizer as a result.

What happens if you put too much e-liquid in your mouth?

If too much e-liquid center chamber, the coils will flood and the atomizer will begin popping and spitting. Since an RTA also has a chimney leading directly to the mouthpiece, you’ll most likely end up with e-liquid in your mouth as well.

Why does my atomizer pop?

Twisted coils are known to cause quite a bit of atomizer popping and spitting. If you have a tank or RBA with a twisted coil, braided coil, Clapton coil or anything of the sort, it may be difficult to avoid a bit of occasional spitting.

How to keep e-liquid out of atomizer?

If you have a sub-ohm tank or RTA, it most likely uses several threaded joints and o-rings to keep the e-liquid inside the tank. That isn’t all they do, though; they also keep the e-liquid out of the atomizer enclosure. Check your tank carefully to confirm that all of the o-rings are in place and not stretched out. Also, disasemble and reassemble the tank to make sure that nothing is cross-threaded. If e-liquid gets inside the atomizer enclosure, the coil will flood. You’ll end up with uncontrollable atomizer popping and spitting until you fix the problem.

What happens if your atomizer is spitting?

If your atomizer is spitting a pipe screen can prevent the e-liquid from reaching your mouth.