Charge the Lost Vape Orion DNA via your computer’s USB port; don’t lose the cap! While the device charges, you can get the pod ready to use. Unscrew the filling cap at the top of the pod and pour e-liquid in until the pod is full.
Full Answer
What is the lost vape Orion DNA go replacement pod cartridge?
The Lost Vape Orion DNA GO Replacement Pod Cartridges are brilliantly designed 3mL refillable cartridge built with an AFC drip tip and two types of coils: 0.25ohm SS316L (Vapor-Focused) and 0.5ohm SS316L (Flavor-Focused). Comes in a pack of two (2) pods. This opens in a new window.
How to lock/unlock the lost vape Orion?
How To LOCK/UNLOCK The Device: To lock or unlock the Lost Vape Orion, you’ll want to press the round fire button down 5 times within 2 seconds. How To Check The Current Battery Level: There is an LED light indicator above the adjustment button that will allow you to see the current battery level on the device.
Is the 1 ohm pod compatible with the DNA Orion?
I did a bit of checking about this 1 ohm pod. Apparently it has a Kanthal coil and is a Lost Vapes pod, however, it is not compatible with the DNA Orion. The 1 ohm kanthal coil is not compatible with the original Orion but you can force the Orion to recognize the pod. Because the DNA Go board is designed for pod resistances from 0. 2 to 0.
What is Orion DNA go pod mod?
Lost Vape Orion DNA GO is the world’s first Pod Mod equipped with the highly sophisticated Evolv DNA Go Chipset. Pocket sized but packs a punch! Perfect for all levels of vapers and smokers who are looking for superior alternatives. (2). Remove the Pod Slide the switch down to unlock the Pod, and pull it off the device.
Is the Lost Vape Orion sub-ohm?
The Orion DNA has two different pods available. Lost Vape calls the 0.25-ohm pod the “vapor pod” and the 0.50-ohm pod the “flavor pod,” but you could think of them as the direct-to-lung and mouth-to-lung pods, respectively. Given that they're both sub-ohm pods, they're no slouches in the vapor production department.
How do you use Orion Q pods on Orion DNA?
1:333:01How to use Orion Q pods in your Orion DNA GO! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you connect your device connect your device go up to options. And you want to go to userMoreAfter you connect your device connect your device go up to options. And you want to go to user interface. Make sure that you are in anything except for clean advanced is definitely the easiest.
How do I prime my lost Orion pod?
0:211:57How To: Fill And Prime Lost Vape Orion Q | Vaporleaf - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn order to prime this pod. We just want to wait 10 minutes after filling it to allowed the liquidMoreIn order to prime this pod. We just want to wait 10 minutes after filling it to allowed the liquid to saturate your cotton fully once your pod is filled.
How do I change settings on Orion Lost Vape?
Lost Vape Orion Basic Operation The Lost Vape Orion has a round fire button on the side which can also be used to indicate the battery level but clicking it twice. The adjustment button changes the power settings from low, medium and high, and if you hold it for three seconds it will activate the replay mode.
Can the Orion DNA Use Q pods?
The Pod Mesh Coil is a IQS mesh coil that comes in 0.3ohm and 0.8ohm. These pods are compatible with the Lost Vape Orion Q AIO Full Kit Each pod holds up to 3ml of e-liquid. This product will contain Salt-based nicotine (also known as Nic Salt, or Salt Nic).
Are all Orion pods compatible?
Can ORION PLUS be used with old ORION refillable pods? Yes. ORION PLUS also compatible with old ORION DNA GO 0.25 ohm and 0.5 ohm refillable pods as well. The best recommended powers for it are Level 1 and Level 2(White and Blue indicators).
How do you prime a pod coil?
To prime a new coil, simply fill your tank with e liquid and leave it to stand for a few minutes before vaping. As above, this will allow the cotton inside your new coil to absorb plenty of e-liquid ready for that first, tasty vape.
What does prime the coil mean?
In short, priming an atomizer coil simply means to pre-saturate the wicking material with e-liquid prior to first using it. This moisture will prevent the wicking material from overheating and burning. It also allows the wick to more fluidly and uniformly absorb the e-liquid from the tank and deliver it to the coil.
How long should you prime a coil?
It should take anywhere between 10 and 15 minutes to absorb and be ready for use.
How do you set up a lost vape?
1:238:42Ursa Mini by Lost Vape! - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just pull up like. So and these pods do hold three mls of liquid. You got magnets running aroundMoreYou just pull up like. So and these pods do hold three mls of liquid. You got magnets running around it your fill port right there and your coil. Goes right there there's a look at the mouthpiece.
What does it mean when my Orion blinks purple?
In order to lock the Orion, simply press the fire button five times within two seconds. After it's locked, a purple light will be shown when you press the fire button indicating you're locked.
How do you unlock a vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
Does DNA Go work with replay?
Because the DNA Go board is designed for pod resistances from 0.2 to 0.5 ohms, and SS coils are needed for replay,, it is not recommended. It'll work but not well and not at all with replay. Hopes this will prevent Orion users from thinking this 1 ohm pod is compatible with the original Orion replay feature.
Is the Orion Q a lost pod?
No, it's a lost vape pod. It came with the new Orion Q, which is the cheaper version of the Orion with a non-DNA chip. They sent two packs. They may not be widely available or readily available to public yet.
Is the Kanthal coil compatible with the Orion?
Apparently it has a Kanthal coil and is a Lost Vapes pod, however, it is not compatible with the DNA Orion. The 1 ohm kanthal coil is not compatible with the original Orion but you can force the Orion to recognize the pod.
Description For 1.0ohm
Orion Replacement Q Pods for the Orion Q Pod Kit, these pods are not interchangeable with the Orion DNA go pod system
Description For 0.5ohm & .25ohm Pod
Orion Replacement Pods .5 ohm and .25 ohm are specifically for the Orion DNA Go Pod System. These pods are not interchangeable with the Lost Vape Orion Q pod system.
How long is the warranty on Orion DNA Go?
Lost Vape Orion Warranty: The Orion DNA Go device is covered by a 6-month warranty from the date of purchase.
What is lost vape?
Lost Vape Orion DNA GO is the world’s first Pod Mod equipped with the highly sophisticated Evolv DNA Go Chipset. Pocket sized but packs a punch! Perfect for all levels of vapers and smokers who are looking for superior alternatives.
Can you dry burn an Orion pod?
Do not dry burn the pod or cotton. Prior to use it is essential to fully saturate the cotton when having filled or refilled an empty cartridge. Orion Pods are not covered under warranty once opened, used, or filled with liquids.
What is lost orion pod?
Lost Orion DNA Pod system is a product that comes with the replaceable Pod Device. This product comes with two different refillable pods in every package and these two variants are 0.25-ohm & 0.5-ohm. The 0.25-ohm replacement Pod system works best with the standard sub-ohm e-liquid & direct-to-lung vaping. Whereas, the 0.5-ohm works best with the Nicotine salt. Hence, they are the exclusive fits in the Orion DNA Go, which is a different product. Though, the Lost Orion DNA Pod comes with the excellently designed 3ml of the refillable cartridge. The Orion mod will automatically tell the resistance of your pod & hence, can adjust accordingly to give you a smoother drag as well as a better flavor.
How long do Orion DNA pods last?
It is recommended for each new pod to sit for 15 minutes before using it. However, the Orion DNA Pods normally lasts for around 14-15 days with moderate usage. Though, every refillable pod can hold up to 2ml of vape juice & uses organic cotton wicking.
Is the Orion Q compatible with the Orion DNA pods?
The Orion Q however, is not compatible with the Orion DNA Pods.
Is the Lost Orion DNA pod rechargeable?
Therefore, the Lost Orion DNA Pod are 100% authentic pods. The Orion DNA Pods comes with excellently designed cartridges. These pods have no rechargeable batteries. However, the Lost Orion DNA Pod recommends the following juice types for each pod: 0.25-ohm pods work best with the sub-ohm juices.