how to get a vape to stop spitting

^{How to Stop Vape Spitting}

• Flicking the tank. You need to get rid of the excess juice in your vape coil. ...
• Increase power. Flooding of the coils could be as a result of low wattage. ...
• Go slow on the priming. Priming is highly recommended when you have a new coil. But, like everything else, too much of it can cause problems.
• Fire first! The sequence of using your vaping device can result in flooding and spitback. Before inhaling the first time, press the firing button for a few seconds.
• Change your e-liquid. It’s possible you’re using the wrong type of liquid for the wrong device. Ideally, PG liquids are runny and flow easily.
Soak up the e-liquid. If the spitting is happening often, the liquid may have collected inside the chimney and found its way back to the coil.
Cut back on the airflow. Reducing the airflow setting will save you the trouble of inhaling too forcefully on your vape, which can encourage flooding.
Take smaller inhales. A worthy alternative to reducing the airflow is to take short draws. ...
Choose your coils carefully. While buying a new coil can be exciting, it can also be the start of your spitting problems. ...
Cover the mouthpiece. Necessity has led some innovative vapers to come up with a smart trick that stops this problem in its tracks.

Can you get a vape spitting?

Not only can you get a vape spitting but you will also get a gurgling sound, less vapor, and sometimes less airflow. After a vape has been sitting all night, it is quite common for the first few hits of the day to have some gurgling and spitback.

How to fix a vape that spits back?

One of the quickest ways to handle spitback is to temporarily increase the wattage or temperature until the flooding and gurgling stops and then go back to your normal vaping temperature. This fix will handle flooding and spit back most of the time!

How do I Stop my e-juice from spitting out?

Try another drip tip – If you have a 510 drip tip, try an anti-spitback drip tip. Angled designs make it harder for e-juice to spit all the way up into your mouth. Longer drip tips—especially if they’re curved or have a bend in them—solve the issue in the same way.

Is there such a thing as ‘spit proof’ vaping?

While there aren’t a great many vapes which advertise ‘spit proof’ as a selling point, there are a handful of products you can utilise to cut down on spitback and crackling.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

How to prevent juice from leaking?

Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.

Why do multi strand coils pop?

Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.

What happens if you inhale too much liquid?

If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.

Why does my vape tank leak?

Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.

What does it mean when a juice tank is not airtight?

Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.

Can you fix a wick on a RTA?

Fix your wicks – If you’re using an RTA and spitback is a problem, you may need to re-wick your coils. It might take some experimenting, but the aim is to cover the channels leading from the tank to the chamber without completely blocking them with densely-packed wick.

What does it mean when you spit back vape juice?

Vape spit back is one of the most excruciating experiences you can go through as a vaper. Having hot vape juice land right into your mouth mid-vape is not something you expect or would like to happen again.

How to get rid of excess juice in vape coil?

You need to get rid of the excess juice in your vape coil. The easiest way to do this is to give the tanks a few short and sharp downwards flicks. To be on the safe side, flick the tank over a sink or have some tissue on standby in case the excess liquid comes flying out.

Can you use PG liquids on a wrong device?

It’s possible you’re using the wrong type of liquid for the wrong device . Ideally, PG liquids are runny and flow easily. As a result, they soak the wicking material faster, making it easier for the coil to end up taking in more liquid than it can vaporise.

Can a coil cause spitting?

While buying a new coil can be exciting, it can also be the start of your spitting problems. Some coils have some design oversights that can increase the chances of spitting. The Clapton coils are a good example. They have multiple stands which cause popping and spitting because of the design. You should also look out for twisted coils which also tend to have the same problem.

How to stop vaping from spitting?

Stop your vape spitting by cleaning regularly. 1. Prime your vape coils. For one thing; prime patiently! The right way to prime is to simply ‘paint’ the exposed cotton with a miniscule touch of vape juice, and then be sure to still wait 5 minutes or so before first firing up your unit. 2.

Where does vape juice come into contact with the heating element?

Unfortunately, many prime their coils a little too intensely, dropping large quantities of vape juice into the centre of the coil, where it comes into direct contact with the heating element and behaves the way most liquids do when sudden, direct heat is applied to them.

What is a spit guard?

There are several drip tips and mouthpieces available that come fitted with a spit guard, effectively a honeycomb or mesh design with holes that are smaller than the agitated vape juice droplets, ensuring the mouthpiece will always be able to catch them before they reach your lips.

Why does my vape keep crackling?

About 90% of the time the reason your vape is spitting or crackling is because the interior of the coil has become flooded with vape juice. Take a moment to imagine what happens if you sprinkle a few drops of water onto a hot pan; the liquid bubbles about, unable to withstand the agitation of direct heat and flies off in any direction to get away.

What is the firing button on a Caliburn G?

The Caliburn G’s firing button is entirely optional, allowing you to activate the unit simply by puffing it. This means the device will only be firing for the moments of your inhalation and never powerfully enough to cause a volatile reaction inside your coil’s housing.

Can you use anti spit mouthpieces on a vape?

Anti-spit mouthpieces are available for those who can’t use a spitting vape. While there aren’t a great many vapes which advertise ‘spit proof’ as a selling point, there are a handful of products you can utilise to cut down on spitback and crackling.

Can you vape with spitback?

If spitback is enough of an irritation that you’re questioning whether to continue vaping, we recommend that you instead opt for a slightly less powerful vape. While no vapes are entirely free of this, you will find that smaller, MTL vape systems are less likely to violently cast hot vape juice in your direction.

Where does vapor go when you vape?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale.

What does a downward flick do to a vape?

A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience. This is particularly good advice if you've just filled the tank - just be warned that it could get messy so be sure to do it over a sink or some tissue!

Can you spitback at a vape tank?

You go to take a nice long draw from your favourite e-juice only for your vape tank to spitback at you. It isn't pleasant and it can happen often, particularly if you're a keen modder trying out different components to get the right 'balance' and find the perfect vaping experience.