- Stuck Vape Tank : The Solutions. There are several ways to unscrew a stuck vape tank. Let’s run down some of the tried and tested ones.
- Cloth. This first method is what works for me and my type of tank. ...
- Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. ...
- The ‘Ol Tap & Twist. When I’m out and about and I have to take my tank off the mod and find it stuck, obviously I won’t have a piece ...
- Rubber Band Wrap. If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work.
- When All Else Fails. For seriously stuck tanks, where the above methods don’t work, you might want to whip out a can of WD-40.
- Stuck Vape Tanks : Final Tip. Stuck vape tanks can be very infuriating and even advanced vapers shudder at the thought. ...
How to keep your vape tank from getting stuck?
Make sure there’s always e-juice in your tank before you start vaping. Even when you take special care of your tank, you can never be sure that it won’t get stuck. For when this frustrating event occurs, it can be tempting to hammer your tank, or throw it against the wall just to get it open.
How to open a jammed vape tank?
You can also use rubberized jar openers, but always remember to wipe the e-liquids off the tank before trying to open it, as it can be very slippery when not wiped. Hopefully one of the above hacks will work for you to successfully undo your jammed vape tank.
How to open a vape tank without a mouse pad?
Just like the mouse pad, cleaning gloves are quite effective for opening a vape tank. You might have thought cleaning gloves are just for protecting your hands when cleaning. However, they can also allow you to have a firm grip on the vape tank when opening it. Actually, cleaning gloves can help you open the tank very quickly.
What do you need to open a vape tank?
A mouse pad comes in handy, especially if you spend much of your day on a computer. Just like the mouse pad, cleaning gloves are quite effective for opening a vape tank. You might have thought cleaning gloves are just for protecting your hands when cleaning. However, they can also allow you to have a firm grip on the vape tank when opening it.
How do you loosen a stuck vape tank?
If you can't get a piece of cloth to grip your tank properly, and you can't source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
How do you open a vape that won't open?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
Why is my tank stuck on my vape?
This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. The most common culprit of a stuck tank is over-tightening or loosening e-liquid, causing a jam.
How do you open a vape tank?
0:000:58How To: Open a Tight Vape Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipI had a hard time opening this until I got two rubber bands. And just wrapped them on the two partsMoreI had a hard time opening this until I got two rubber bands. And just wrapped them on the two parts top and bottom there you have to twist and then you twist opposite directions obviously.
How do you unscrew a tight cart?
3:436:57ROHS iMini How to remove a tank that's stuck - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I was able to remove it I saw I'm pretty sure you saw how tight I cranked it down okay. So youMoreSo I was able to remove it I saw I'm pretty sure you saw how tight I cranked it down okay. So you got to put enough grip on this neck. Here.
How do you open a Smok vape?
1:032:19Smok Nord Unboxing & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'llMoreFind the fill port on the side and lift the cap fill. It up with your favorite e-juice. Today I'll be using mango buy salt shaker. Once your pot is full pulls the cap push the pod into the device.
How do you remove a Smok tank?
0:483:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe toMoreIf you flip it around the bottom part might not snuggle and so tightly. So this is your coil toe to the top unscrew. And there you go voila. This is inside of your coil.
Opening A Jammed Vape Tank
If you have a “muscular” pair of hands, and can firmly grip the tank, then you’re good to go. Take note that a vape tank is fragile and should be handled with a lot of care. You should only apply pressure to the right part of the vape tank. Besides, numerous tools can help you open a jammed vape tank:
How To Unscrew A Stuck Vape Tank?
This is probably the easiest way of separating a jammed vape tank from your mod. Here, you can use a non-stick piece of cloth, even a chamois cloth will do a good job, grip your vape tank and twiddle it off. Additionally, a pretty old, rough, and stiff cloth has a better “grippiness” as newer ones might be a bit sleeper.
Tank Stuck To Vape Battery
In some cases, the vape may not only be stuck to the mod but also the batteries. This is way riskier because any botched solution would mean replacement with an entirely new tank. When trying to open a vape tank stuck to vape batteries, be extra careful not to destroy the tank and the mod altogether.
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
How to open a stuck tank with simple science
Opening a tank is all about science! The issue is usually easily revolved if you know where and how to make use of torque. The key is to apply as much torque as needed to get it opened. But since tanks have several parts, applying pressure and torque without damaging the tank is not an easy task.
Opening a jammed e-cig tank with household items
If you are the kind that takes extra precautions while handling an e-cig tank, then I am glad to tell you that there are many products that are made for jammed tanks. But this would mean that you will have to spend a little extra on these accessories, but since they unstuck your tank without damaging it, they’re definitely useful.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
