The 8-second pull is the most perfect for stealth vaping. Just use any mouth to lung device and take a long pull from the mouthpiece. Keep the vapor in your lungs for up to 8 seconds and when exhaling you will notice there's almost nothing coming out.
Full Answer
How do you use stealth vaping?
When you go to exhale the vapor, it’s best to purse your lips and blow a tight stream of vapor downward and away from any onlookers. Remember, stealth vaping is discreet, not invisible. What is zero vaping? Zero vaping is a type of stealth vaping where the user takes a hit but exhales no vapor.
How stealthy is it to zero vape?
Attempting to zero vape on bigger and more powerful device like a sub ohm tank will likely result in an embarrassing coughing fit, followed by vapor jumping out of your face. Not stealthy at all. Those that have mastered this technique can vape sitting next to someone who’s clueless to what’s happening.
Is a “vape whenever and wherever you want” attitude a bad idea?
With so much scrutiny being paid to electronic cigarettes by the media and lawmakers, a free-for-all, “vape whenever and wherever you want” attitude may not be the right approach. Not only will it attract unwanted attention, but in my opinion, it gives vapers a BAD RAP.
How do you guys deal with zero vaping?
For zero vaping it helps if you release the fire button and continue to inhale for a couple of seconds, prevents vapor release through your airholes and thins out any vapor you do exhale. Good point. Spoken like a true stealth vaper!
How to turn on a KOOPOR vape?
1. Power On: ① While the device is off power, fast click KOOPOR Button 5 times in 2s to start up. OFF; ③ Press the UP Button + DOWN Button simultaneously to flip the screen.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
What is a Koopor?
The KOOPOR™ design may not be for everyone, it is a clean circuit board design that's sure to draw attention. With a solid stainless steel case, and a powerful 200w output it's a mod that should last for quite some time. And with the magnetic battery cover, it's a snap to replace the batteries in the KOOPOR Plus.
Can you factory reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I unlock my SMOK vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How long has Nathan Hauck been in vaping?
Nathan Hauck has been in customer services for over 20 years, with a dedication to informing customers. Nathan prides himself on being a jack of all trades, and finds himself devoting his free time to learning new skills. After 22 years of smoking, and vaping products becoming more readily available, Nathan made the switch to vaping and hasn’t looked back.
How much does a Kooper Plus weigh?
With batteries and a filled tank adding 150g, the Kooper plus weighs just under 400g, or just under a pound. The KOOPOR Plus definitely feels solid, and if you don’t like the bare metal or painted metal the included silicone sleeve will give a nice rubberized grip. The KOOPOR Plus is also a large mod, so bigger hands will likely prefer, while smaller hands will likely prefer the KOOPOR mini.
What are the flavors of Kooper mini?
The KOOPOR mini comes in four flavors, “Stainless Steel for Purity, Matte White for Grace, Night Black for Mystery and Passion Red for Love”. All 4 feature the KOOPOR™ name and circuit paths design, on the back we have PLUS and an open with arrow. On the bottom of the unit is a nice warning that the micro usb port is only for upgrades.*#N##N#The KOOPOR mini features many vent holes on the battery cover and bottom of the unit (48 in total) and adds a nice appeal to the design. On the KOOPOR Plus however there are 110 just on the battery cover, and it just starts to look a bit excessive.#N##N#*Based on the recent information on software upgrade for the mini, it requires some special equipment, and will require you to send your KOOPOR Plus to a wholesaler or vendor that is doing the firmware upgrades. I spoke with VaporDNA as well, they are doing the upgrade for customers that bought the KOOPOR mini from them, and are working with Smok, to possibly expand this to other KOOPOR mini owners. So make sure to contact the vendor first, and get all the details.
What is a stealthy vape?
Stealthy vapes are great for subtle inhales and avoiding altercations and conflicts with non-smokers. They are also good for not tempting your smoker co-workers or your friends who are struggling to quit. They provide a quick and easy nicotine fix without the unnecessary attention.
How much power does a stealth mod have?
They have a maximum output of between 30 – 50W and they are definitely not intended for cloud chasing. You won't see any blinking lights and vapor production is moderate at best. Stealth mods serve a very precise purpose. They help you get your nicotine fix without drawing too much attention to yourself.
How long to pull a mouth to lung vape?
Just use any mouth to lung device and take a long pull from the mouthpiece. Keep the vapor in your lungs for up to 8 seconds and when exhaling you will notice there's almost nothing coming out. Because the vapor dissipates inside your lungs, it gives that much needed nic fix without drawing any attention.
What is a Juul ECIG?
It's virtually a plug and play type of device that works with pre-filled pods. Easy to use and easy to conceal this tiny vape fits inside any hand or pocket. It's leak free, doesn't produce too much vapor and the 50mg nicotine concentration is perfect for a very satisfying draw.
Why do you need a stealth mod?
A stealth mod will be particularly helpful when you're concerned about public opinion or want to be respectful with others around you. This usually happens when you want to vape at work or in various other public spots. And while you could ultimately conceal vapor and use your mod even in places where it is prohibited, ...
Is a dry herb vaporizer stealthy?
Stealthy dry herb vaporizers. Some dry herb vaporizers are also intended to be stealthy for obvious reasons. And while they can draw some attention due to the smell, using conduction or convection instead of combustion makes a big difference.
Is it good to use VG e-liquid?
It's also probably a good idea to use a lower VG e-liquid. Vegetable glycerin is responsible for the amount of vapor produced, and the lowering the concentration will have a big impact on the overall output.
MrZombieAndMe Full Member
Hey guys, been a while since I've been on the forums. Lets just say things have been quite hectic and I never had a chance to get as involved here as I'd hoped. So maybe heres a new start. I'd just like to ask around the community for some possible advice on the new set-up I have.
BigEgo Ultra Member ECF Veteran
Glad you like it. Now you should experiment with titanium and stainless steel wires.
MrZombieAndMe Full Member
I'm sure I could find the answer by searching, but seeing as you're a veteran then maybe you could give me some personal insight on which metal you've found to be the most enjoyable in your mods? Or whichever you've found you've enjoyed the most in general.
BigEgo Ultra Member ECF Veteran
Titanium. It can be temp controlled, has a clean taste and is more hassle free than nickel.
KenD Vaping Master ECF Veteran
I enjoy titanium and stainless steel (304) equally. Ss has the benefit that it can be used in vw as well. Ni200 I won't touch anymore, simply not worth the hassle.
ThaFuzz Ultra Member Verified Member ECF Veteran
Good thread. I'm interested in trying TC in my Smok Koopor Plus 200W. I've wound my own Kanthal coils for the last two years for my Kayfun 3 and 4 and prior to that I rebuilt Protank coils with cotton and Kanthal.
BigEgo Ultra Member ECF Veteran
Good thread. I'm interested in trying TC in my Smok Koopor Plus 200W. I've wound my own Kanthal coils for the last two years for my Kayfun 3 and 4 and prior to that I rebuilt Protank coils with cotton and Kanthal.